AMX NXA-AVB/ETHERNET

AMX NXA-AVB/ETHERNET bruksanvisning

(1)
  • Quick Start Guide
    NXA-AVB/ETHERNET Modero
    ®
    Ethernet/Video Breakout Box
    Overview
    The NXA-AVB/ETHERNET Breakout Box (FG2254-10) facilitates the installation
    and distribution of video, data, and audio to Modero touch panels located up to
    200 feet (60.96 m) from the AVB box. This unit accepts either Composite or
    S-Video from standard video devices. FIG. 1 shows the NXA-AVB/ETHERNET
    Breakout Box.
    For more detailed installation and operating instructions, refer to the specific
    Modero touch panel instruction manual, available online at www.amx.com.
    Specifications
    NXA-AVB/ETHERNET Breakout Box
    FIG. 1 shows the front and rear connectors on the breakout box.
    Note: The breakout box unit can be mounted on either a horizontal flat surface
    or into an equipment rack (by removing the front screws and attaching it to an
    AC-RK).
    Note: The PSN power supply being used on the NXA-AVB/ETHERNET is
    dependent on the power requirements of the target touch panel.
    Connections and Wiring
    A PSN power supply can indirectly provide power to a Modero panel by routing
    power through the NXA-AVB/ETHERNET Breakout Box. FIG. 2 shows a sample
    wiring configuration using both an indirect or direct PSN power connection for a
    video-capable Modero panel. Refer to the online Modero Touch Panel instruction
    manuals for connection options.
    The NXA-AVB/ETHERNET is an optional accessory for non-video capable
    Modero touch panels but can only transfer Audio signals between the Breakout
    Box and the target touch panel.
    A PSN power supply can also directly provide power through the unit to a target
    Modero panel. Refer to the specific Modero touch panel instruction manual for
    detailed wiring information. FIG. 3 shows a sample wiring configuration for a
    non-video capable Modero panel.
    Note: AMX recommends using the above power connection examples when
    connecting the breakout box to your touch panel. If you want to attempt another
    configuration or if you want to use two power supplies, be sure to avoid any
    potential ground loops that may occur in your connection configuration. Ground
    loops can cause display errors with your touch panel.
    Wiring the NXA-AVB/ETHERNET connectors and cables
    The inputs and outputs on the breakout box are separated into front and rear
    connectors. The rear connectors are used to input external signals. The front
    connectors are used to communicate signals between the
    NXA-AVB/ETHERNET and a target Modero panel. FIG. 4 provides a layout of
    the wiring connection both into and from the breakout box.
    FIG. 1 Connector layouts on the NXA-AVB/ETHERNET Breakout Box
    NXA-AVB/ETHERNET Specifications
    Dimensions
    (HWD):
    1.50" x 5.55" x 4.88" (3.81 cm x 14.10 cm x 12.40 cm)
    Width when attached to mounting ears: 6.65" (16.89 cm)
    Power
    Consumption:
    50mA (with audio/video input)
    23mA (with no audio/video)
    Routed through AVB using a PSN power supply (Refer to
    FIG. 2 and FIG. 3 for more information).
    Certifications: FCC, CE, and EN60950
    Front Components: 2-pin 3.5 mm Phoenix connector for power to the touch panel
    Green LED provides an indication of power status
    RJ-45 connector provides Ethernet signals to the touch panel
    RJ-45 connector provides differential audio and video signals
    to the touch panel (panel type dependent)
    Rear Components: 6-pin 3.5 mm Phoenix connector for in-bound (left/right
    channel) audio
    4-pin 3.5 mm Phoenix connector for out-bound (from
    microphone) audio
    BNC connector (female) for Composite or Chroma
    (for video-capable panels only)
    BNC connector (female) for luminance (for video-capable
    panels only)
    RJ-45 connector for Ethernet input from the control system
    2-pin 3.5 mm Phoenix connector for in-bound power
    Features: Accepts either Composite or S-Video (video-capable
    panels only)
    Provides audio distribution to the non-video touch panels
    over a CAT5 cable (up to 200 ft.)
    Provides video/audio distribution to the video-capable touch
    panels over CAT5 cable up to 200 ft. (60.9 m)
    Availability: This unit is not included with current Modero panels
    This unit is included with VG-series Video Kits and with the
    7" panels
    Included
    Accessories:
    Two 2-pin Phoenix connectors (41-5025)
    One 4-pin Phoenix connector (41-5047)
    One 6-pin Phoenix connector (41-5063)
    One Rack Mount Kit (KA2250-40) with mounting bracket
    (62-2254-02)
    Optional
    Accessories:
    AC-RK Accessory RackMount Kit (FG515)
    Modero Table Top Cable (CA2250-50)
    PSN6.5 power supply (FG423-41) (panel dependent)
    Power
    (front)
    Ethernet (to panel)
    Audio/Video
    Power (to panel)
    S-Video Chroma
    Composite/
    Mic Out
    Audio
    In
    Ethernet
    S-Video
    Luma
    (rear)
    (to panel)
    FIG. 2 Sample wiring configuration on video-capable panels using this Breakout Box
    FIG. 3 Sample Wiring configuration on non-video panel using this Breakout Box
    NXD/T Video-capable
    Ethernet In
    PSN power
    (RJ-45)
    Video In
    (BNC)
    Mic Out
    (4-pin captive-wire)
    Audio In
    (6-pin captive-wire)
    NXA-AVB/ETHERNET
    PSN4.4/6.5
    supplied via
    NXA-AVB box
    Audio/Video
    (CAT5)
    Line Level out
    (to amplifier
    or VOL card)
    Touch Panels
    or
    Direct
    Connect
    Breakout Box
    Ethernet
    (rear)
    (front)
    (CAT5)
    supply
    Indirect
    Connect
    PSN power
    supply
    Direct
    connect
    NXD/T Non-video capable
    Ethernet
    (CAT5)
    Touch Panels
    PSN power
    Audio (CAT5)
    between optional
    NXA-AVB/ETHERNET
    Breakout Box
    supply
AMX NXA-AVB/ETHERNET

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om AMX NXA-AVB/ETHERNET? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av AMX NXA-AVB/ETHERNET att svara på din fråga.

Se manualen för AMX NXA-AVB/ETHERNET helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.2. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om AMX NXA-AVB/ETHERNET? Ställ din fråga här

AMX NXA-AVB/ETHERNET – specifikationer

Allmänt
Varumärke AMX
Modell NXA-AVB/ETHERNET
Produkt AV förlängare
EAN 718878006429, 7188780064290
Språk Engelsk
Filtyp PDF
Egenskaper
Modell Sändare och mottagare för AV-utrustning
Maximal upplösning -
Kabeltyper som stöds Cat5
Maximal överföringshastighet avstånd 60.96
Produktens färg Svart
Anslutningar
Ingående kompositvideo 1
Antal S-Video-ingångar 1
Vikt & dimension
Produktstorlek (BxDxH) 140.7 x 125.2 x 38.6

Bruksanvisni.ng

Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

Bruksanvisni.ng

© Copyright 2020 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer