Anthro MiniCart bruksanvisning

Anthro MiniCart
(1)
  • Sidantal: 2
  • Filtyp: PDF
TECHNOLOGY FURNITURE
®

Anthro MiniCart

Assembly Instructions

01Insert Screws ............................ Qty. 4 ....................325-5052-00
02– 2
3
/
8
” Non-Locking Casters ........ Qty. 2 ...................150-5002-03*
03– Caster Inserts ........................... Qty. 4 ....................525-1000-00*
04– 2
3
/
8
” Locking Casters ................ Qty. 2 .................. 150-5003-03*
05– 1.75” Large End Caps ................ Qty. 2 ......................175-5021-xx
06– Base Tube Screws ............................. Qty. 3 ..................... 325-5000-00
07– MiniCart Base Tube ................... Qty. 1 .....................125-5004-xx
08– Self-threading Screws ...................Qty. 6 ......................325-5010-00
09– Vertical Legs ............................ Qty. 3 .................................................
23.875” Vertical Legs (GT23xx) ...... ................................. 125-5020-xx
Enclosed Parts List
Detailed views of all hardware is provided with each assembly step.
10– 1-5/8” Screws ....................................Qty. 6 .....................325-5086-00
11– Shelf Supports ...................................Qty. 6 ......................175-5060-xx
12– Shelf Clamps ......................................Qty. 6 .................... 175-5059-xx
13– MiniCart Shelves ....................... Qty. 2 ...................... 100-6003-xx
14– 1.5” Small End Caps .................. Qty. 3 ......................175-5020-xx
All fastener quantities listed here are the minimum needed for your
cart assembly. Your shipment may include a few extras.
Cable Management Components
Cable Alley, 9” ...................... Qty 1 ............................................. 175-5061-03
Cable Alley, 3” ...................... Qty 1 ............................................. 175-5062-03
Cord Handler ........................ Qty 1 ............................................. 175-5001-03
Self-threading Screws...... Qty 6 ..............................................325-5010-00
Anthro
®
Corporation Technology Furniture
®
10450 SW Manhasset Drive Tualatin, Oregon 97062
SAVE THESE INSTRUCTIONS!
Document # 300-5068-00

Step 7

Install all four caster inserts into the base tube and secure (fully tighten) with one Caster Insert Screw per insert. Next, push the casters, (locking ones in front) into the caster inserts.

Step 8

Carefully rotate the shelf assembly (from Step 6), upside down as shown.Place the base tube assembly (from Step 7) onto the vertical legs of the shelf assembly. Attach the base tube to each leg using a total of three 3-1/2” Bolts. Tighten all Self-threading and Base Tube Screws.

Step 9

Rotate your MiniCart over onto the casters.Pop the three 1.5” small end caps into the vertical legs and the two 1.75” large end caps into the base tube. After you add your equipment to the cart, select the cable management components that suit. To install the Cable Alleys, expand each sleeve and fit it over a cart leg. Align the mounting hole(s) in the sleeve with the holes on the leg, then install with self-threading screws.To install the Cord Handler, snap the large end around any cart leg, then route cables through the small end. Congratulations! Your MiniCart assembly is complete.Please return the enclosed Registration Card to receive our product updates, new catalogs, and sale flyers. Thank you for choosing Anthro!
January 2015, Rev D
These Assembly Instructions are for the GT23xx. Before beginning assembly of your Anthro MiniCart, please take a moment to review the parts list below to verify that your shipment is complete.
Does your Cart have 4” Casters?*
Then these are your casters:
4” Locking Caster
150-5011-03
4” Non-Locking Caster
150-5010-03
Questions? 1-800-325-3841
04
06
07
03
02
09
10
05
12
01
08
11
14
13
1.5” Small End Cap
1.75” Large End Cap
3-1/2” Bolt
325-500 0-00
TOOLS
To make the assembly of your cart even
easier, we have included all of the required
tools . Use the handy Hex Driver Bit in your
electric drill in place of the Hex Driver.
Hex Driver 5/32”.................. 375-5000-00
Hex Driver Bit 5/32” ........... 375-5003-00
8 oz. Rubber Mallet............ 375-5022-00
1/2” Caster Insert Screw
325-505 2-00
Locking Casters
Anthro MiniCart

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Anthro MiniCart? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Anthro MiniCart att svara på din fråga.

Se manualen för Anthro MiniCart helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.5. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Anthro MiniCart? Ställ din fråga här

Anthro MiniCart – specifikationer

Allmänt
Varumärke Anthro
Modell MiniCart
Produkt Skrivbord
EAN 766212220260
Språk Engelsk
Filtyp PDF
Vikt & dimension
Produktstorlek (BxDxH) 476.25 x 571.5 x 711.19 mm
Bredd 476.25 mm
Djup 571.5 mm
Höjd 711.19 mm
Design
Maxvikt 68 kg
Produktens färg Svart
Ergonomi
Lyft 0 cm
Rotationsvinkel 360 °
Gränsssnitt för panelmontering Nej mm
visa mer

Vanliga frågor

Nedan hittar du de vanligaste frågorna om Anthro MiniCart .

Är din fråga inte listad? Ställ din fråga här