B&B Electronics ADAM-4510S bruksanvisning

B&B Electronics ADAM-4510S
  • Sidantal: 6
  • Filtyp: PDF
  • 1 ADAM-4510/4510S/4520 Startup Manual

    ADAM-4510 RS-422/RS-485 Repeater

    ADAM-4510S Isolated RS-422/485 Repeater

    ADAM-4520 Isolated RS-422/485 Converter

    Startup Manual

    Before you begin installing your module, please make
    sure that the following materials have been shipped:
    If any of these items are missing or damaged, contact
    your distributor or sales representative immediately.
    For detailed information about the ADAM-4510,
    ADAM-4510S or ADAM-420, please refer to the man-
    ual on the enclosed CD (in PDF format).
    CD:\Manual\ADAM 4000\ADAM-4000.pdf
    Note : Acrobat Reader is required to view any PDF file.
    Acrobat Reader can be downloaded at: http://
    (Acrobat is a trademark of Adobe.)
    A software utility and user manual can be found on the
    driver CD: CD:\ADAM-4000-5000\ADAM_Utility.exe
    CE/FCC Notification
    ADAM-4510, ADAM-4510S and ADAM-4520 devel-
    oped by Advantech Co., Ltd. has passed the CE and
    FCC test for environmental specifications. The test
    conditions for passing including the equipment being
    operated within an industrial enclosure. Therefore, in
    order to protect the ADAM module from being dam-
    aged by ESD, we strongly recommend that the use of
    CE-compliant industrial enclosure products
    Most industrial computer systems come with RS-232
    serial ports. Though widely accepted, RS-232 has lim-
    ited transmission speed, range and networking capa-
    bilities. The RS-422 and RS-485 standards overcome
    these limitations by using differential voltage lines for
    data and control signals.
    ADAM-4520 is a isolated converter for systems origi-
    nally equipped with RS-232. It transparently converts
    RS-232 signals into isolated RS-422 or RS-485 sig-
    nals. You don't need to change your PC's hardware or
    your software. The ADAM-4520 lets you easily build
    an industrial grade, long distance communication sys-
    tem with standard PC hardware.
    The ADAM-4510 and ADAM-4510S repeaters simply
    amplify, or boost, existing RS-485 signals to enable
    them to cover longer distances. They extend the com-
    munication distance by 4000 ft (1200 m) or extends
    the number of connected nodes by 32.
    Intelligent RS-485 Control
    The RS-485 standard supports half-duplex communi-
    cation. This means that just two wires are needed to
    both transmit and receive data. Handshaking signals
    (such as RTS, Request To Send) are normally used to
    control the direction of the data flow. A special I/O cir-
    cuit in ADAM-4510, ADAM-4510S, and ADAM-4520
    automatically senses the direction of the data flow and
    switches the transmission direction. No handshaking
    signals are necessary. So you can build an RS-485
    network with just two wires. This RS-485 control is
    completely transparent to the user. Software written
    for half-duplex RS-232 works without modification.
    Isolation (ADAM-4510S/4520 only)
    ADAM-4510S and ADAM-4520's Opto-isolators pro-
    vide 3000 V
    isolation to protect the host computer
    from ground loops and destructive voltage spikes on
    the RS-485 data lines.
    Surge Protection (RS-485 only)
    ADAM-4510/4510S and ADAM-4520 offer internal
    surge-protection on their data lines. Internal high
    speed transient suppressors on each data line protect
    the modules from dangerous voltages levels or spikes.
    Tough Industrial Design
    You can power ADAM-4510, ADAM-4510S and
    ADAM-4520 with any unregulated power source
    between +10 and +30 V
    . Their industrial-grade
    plastic shells can be mounted on a DIN-rail, panel or in
    a piggybacked stack. You make signal connections
    through plug-in screw terminal blocks, guaranteeing
    easy installation, maintenance and modification

    Packing List Overview

    • 1 x ADAM-4510, ADAM-4510S or 4520
    • 1 x DIN-rail mounting bracket (attached to module)
    • 1 x ADAM-4510/4510S/4520 Startup Manual
    • 1 x Panel mounting bracket

    Manual and Software

    For more information on this and other Advantech
    products, please visit our website at:
    For technical support and service, please visit our
    support website at:
    This manual is for ADAM-4510, ADAM-4510S and
    Part No. 2003451000 4th Edition
    March 2005.

    ADAM-4510/4510S/4520 RS-422/485 Repeater/Converter

B&B Electronics ADAM-4510S

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om B&B Electronics ADAM-4510S? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av B&B Electronics ADAM-4510S att svara på din fråga.

Se manualen för B&B Electronics ADAM-4510S helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 9.1. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om B&B Electronics ADAM-4510S? Ställ din fråga här

B&B Electronics ADAM-4510S – specifikationer

Varumärke B&B Electronics
Modell ADAM-4510S
Produkt Ej kategoriserat
Språk Engelsk
Filtyp PDF
Tekniska data
Värdgränssnitt RS-422/485
Utgränssnittet RS-422/485
Anslutning 1 Terminalhylsa
Anslutning 2 Terminalhylsa
Isolering 3 kV
Produktens färg Blå
Baudhastighet 115.2 Kbit/s
Strömförbrukning 1400 mA
Spänning 10 - 30 V
Temperatur vid drift -10 - 70 ° C
Temperaturintervall (förvaring) -25 - 85 ° C
Intervall för relativ operativ luftfuktighet 5 - 95
LED-indikatorer Ja
Windows-operativsystem som stöds Ja