The Barracuda IM Firewall is an IM gateway and server appliance that is installed
between your internal network and the Internet. It provides a secure internal IM service for
your company, as well as a way to log and manage all public IM traffic. The Barracuda IM
Firewall provides identity management, keyword notification, and integrates with your
existing LDAP or Active Directory server to provide IM security and management
capabilities at the organizational, group, or even user level.
Getting Started
This guide provides you with setup instructions for the Barracuda IM Firewall. We
recommend reading these instructions fully before starting the setup. To begin
setting up your Barracuda IM Firewall, you need the following items:
• Barracuda IM Firewall
•AC Power Cord
•(2) Ethernet Cables
•Mounting Rails (model 620/820 only)
• VGA Monitor (recommended)
•PS2 Keyboard (recommended)
Physical Installation
To install the Barracuda IM Firewall:
1. Fasten the Barracuda IM Firewall to a 19-inch rack or place it in a stable
location.
2. Connect an Ethernet Cable from your network switch to the LAN ethernet
port on the front panel of the Barracuda IM Firewall. When the Barracuda IM
Firewall is configured using the inline setup, you will use both the LAN and
WAN ports to connect.
3. Connect a Standard VGA Monitor, PS2 Keyboard, and AC power cord to the
unit.
Note: Immediately after connecting an AC Power Cord to the unit, it may
power ON for a few seconds and then power OFF. This is because the unit is
designed to automatically return to a powered ON state in the event of a
power outage.
4. Press the POWER button on the front panel to turn the unit on.
Configure IP Address and Network Settings
If you have a monitor connected, the Barracuda IM Firewall displays the Boot
Menu initially and the Administrative Console login prompt once it is fully booted.
To begin the configuration:
1. Login to the Administrative Console using the admin login:
•Login: admin
•Password: admin
2. Configure the IP Address, Subnet Mask, Default Gateway, Primary DNS
Server and Secondary DNS Server as appropriate for your network.
3. Save your changes.
If you do not have a monitor and keyboard and want to set the IP using the
RESET button on the front panel, press and hold the RESET button per the
following table:
IP addressPress and hold RESET for…
192.168.200.200 5 seconds
192.168.1.200 8 seconds
10.1.1.200 12 seconds
Barracuda IM Firewall Configuration
Use a computer with a Web browser that is connected to the same network as
the Barracuda and follow these steps:
1. In the browser address bar, enter http:// followed by the IP address of the
Barracuda, followed by the default Web Interface HTTP Port (:8000). For
example, if you configured the Barracuda with an IP address of
192.168.200.200, you would enter the following:
http://192.168.200.200:8000
2. Login to the Barracuda IM Firewall Web interface as the administrator:
Username: admin Password: admin
3. Click any one of the Save Changes buttons to save all of the information.
Update the Firmware
1. Go to Advanced
ÆFirmware Update.
2. Press Download Firmware. Click OK to acknowledge the download duration
message. To avoid damaging the Barracuda, do not power OFF during an
update or download. To view download progress, refresh your browser. You
will be notified when the download is complete.
3. On the Advanced
ÆFirmware Update page, click the Apply Now button to
apply the firmware. This will take a few minutes to complete.
Power button
Whatsapp
Mail
Facebook
Behöver du hjälp?
Antal frågor: 0
Behöver du hjälp eller har du en fråga om Barracuda Networks IM Firewall 820? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Barracuda Networks IM Firewall 820 att svara på din fråga.
Om Barracuda Networks IM Firewall 820
Se manualen för Barracuda Networks IM Firewall 820 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 9.5. Den här manualen är tillgänglig på följande språk: Engels. Behöver du hjälp eller har du en fråga om Barracuda Networks IM Firewall 820? Ställ din fråga här
Barracuda Networks IM Firewall 820 – specifikationer
Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.
IMBarracuda IM Firewall - Quick Start GuideThe Barracuda IM Firewall is an IM gateway and server appliance that is installedbetween your internal network and the Internet. It provides a secure internal IM service foryour company, as well as a way to log and manage all public IM traffic. The Barracuda IMFirewall provides identity management, keyword notification, and integrates with yourexisting LDAP or Active Directory server to provide IM security and managementcapabilities at the organizational, group, or even user level.Getting StartedThis guide provides you with setup instructions for the Barracuda IM Firewall. Werecommend reading these instructions fully before starting the setup. To beginsetting up your Barracuda IM Firewall, you need the following items:• Barracuda IM Firewall• AC Power Cord• (2) Ethernet Cables• Mounting Rails (model 620/820 only)• VGA Monitor (recommended)• PS2 Keyboard (recommended)Physical InstallationTo install the Barracuda IM Firewall:1. Fasten the Barracuda IM Firewall to a 19-inch rack or place it in a stablelocation.2. Connect an Ethernet Cable from your network switch to the LAN ethernetport on the front panel of the Barracuda IM Firewall. When the Barracuda IMFirewall is configured using the inline setup, you will use both the LAN andWAN ports to connect.3. Connect a Standard VGA Monitor, PS2 Keyboard, and AC power cord to theunit.Note: Immediately after connecting an AC Power Cord to the unit, it maypower ON for a few seconds and then power OFF. This is because the unit isdesigned to automatically return to a powered ON state in the event of apower outage.4. Press the POWER button on the front panel to turn the unit on.Configure IP Address and Network SettingsIf you have a monitor connected, the Barracuda IM Firewall displays the BootMenu initially and the Administrative Console login prompt once it is fully booted.To begin the configuration:1. Login to the Administrative Console using the admin login:• Login: admin• Password: admin2. Configure the IP Address, Subnet Mask, Default Gateway, Primary DNSServer and Secondary DNS Server as appropriate for your network.3. Save your changes.If you do not have a monitor and keyboard and want to set the IP using theRESET button on the front panel, press and hold the RESET button per thefollowing table:IP address Press and hold RESET for…192.168.200.200 5 seconds192.168.1.200 8 seconds10.1.1.200 12 secondsBarracuda IM Firewall ConfigurationUse a computer with a Web browser that is connected to the same network asthe Barracuda and follow these steps:1. In the browser address bar, enter http:// followed by the IP address of theBarracuda, followed by the default Web Interface HTTP Port (:8000). Forexample, if you configured the Barracuda with an IP address of192.168.200.200, you would enter the following:http://192.168.200.200:80002. Login to the Barracuda IM Firewall Web interface as the administrator:Username: admin Password: admin3. Click any one of the Save Changes buttons to save all of the information.Update the Firmware1. Go to AdvancedÆFirmware Update.2. Press Download Firmware. Click OK to acknowledge the download durationmessage. To avoid damaging the Barracuda, do not power OFF during anupdate or download. To view download progress, refresh your browser. Youwill be notified when the download is complete.3. On the AdvancedÆFirmware Update page, click the Apply Now button toapply the firmware. This will take a few minutes to complete.Power button
