Binatone Lifestyle 1910 bruksanvisning

Binatone Lifestyle 1910
7 · 1
PDF anvisning
 · 2 sidor
Engelsk
anvisningBinatone Lifestyle 1910
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.Before operating this set,please read these instructions carefully.
1 2
5.4 EDIT A PHONEBOOK ENTRY .................................................................................... 1
5.5
DELETE A PHONEBOOK ENTRY .............................................................................. 1
5.6 DELETE
5.7
CHECK THE PHONEBOOK USAGE ..........................................................................1
6
CALLER DISPLAY (NETWORK DEPENDENT)...............................................1
6.1 VIEW THE CALL LIST ................................................................................................. 1
6.2
STORE A CALL LIST NUMBER INTO THE PHONEBOOK........................................ 1
6.3
DELETE AN ENTRY IN THE CALL LIST .................................................................... 1
6.4 DELETE
7
PHONE SETTINGS...........................................................................................1
7.1
DATE AND TIME SETTINGS ...................................................................................... 1
7.1.1
CHANGE THE DATE FORMAT .................................................................................1
7.1.2 CHANGE THE TIME FORMAT .................................................................................. 1
7.1.3
SET THE TIME........................................................................................................... 1
7.1.4
SET THE DATE .......................................................................................................... 19
7.2
ALARM SETTINGS......................................................................................................
7.2.1
TURN ON/OFF THE ALARM ..................................................................................... 20
7.2.2 SET THE ALARM TIME ............................................................................................. 20
7.3
HANDSET SETTINGS .................................................................................................
7.3.1
SET THE RINGER FOR INTERNAL CALLS ........................ .................
7.3.2 SET THE RINGER MELODY FOR EXTERNAL CALLS ............................................
7.3.3 SET THE RINGER VOLUME .....................................................................................
7.3.4 SET ALERT TONES...................................................................................................
7.3.5 SET THE HANDSET LANGUAGE .............................................................................
7.3.6 RENAME THE HANDSET..........................................................................................
7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE ...................................
7.3.8 SET THE AUTO ANSWER ........................................................................................
7.4 BASE SETTINGS ........................................................................................................ 22
21
21
22
3
8
8
9
9
9
9
20
20
20
21
21
22
22
7.4. D
E-REGISTER A HANDSET ..................................................................................... 22
7.4. C
HANGE THE DIAL MODE .......................................................................................
7.4. C
HANGE THE FLASH (RECALL)TIME .....................................................................
7.4. CHANGE THE SYSTEM PIN CODE ......................................................................... 23
7.5
REGISTRATION .......................................................................................................... 24
7.6
RESET YOUR PHONE ................................................................................................ 24
23
23
1
2
3
4
9

USER GUIDE

3 GETTING TO KNOW YOUR PHONE 3.1 Handset Overview
6
7
8
9
3.5 Text and Digit Entry Table The following table shows you where each letter and punctuation character can be found, by using repeated presses of the alphanumeric keypad. This will be helpful when storing a name in the phonebook and renaming your handset. In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned at the right of the last character entered. Writing Tips: 1. Once a character is selected, the cursor will move to the next position after a short pause. 2. You can move the cursor within the text with the <UP/DOWN> keys to amend the text entry. 3. Press <C> to delete the last character. 4. Press and hold <C> to delete the entire text string.
10
4.3 End a Call During a call press <TALK OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
12
11
13
4.4 Adjust Volume There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece During a call: setting is shown. When you end the call, the setting will remain at the last selected level. 4.5 Mute a Call You can talk to someone nearby without letting the caller hear you during a call.During a call:
Press <C> to mute the microphone and “MUTED” will display on the LCD.
Your caller cannot hear you. Press <C> again to unmute the microphone.
4.6
the
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER OFF” or speakerphone volume. icon is displayed on the LCD.
4.7 Turn on the Keypad Lock In idle, press and hold <STAR/*> to turn on the keypad lock. The4.8 Redial the last numberYou can redial any of the 5 last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. 4.8.1 Redial a Number from the Redial List 1. In idle mode, press <DOWN> to access the redial list. Note: If the redial list entry shows a name, press <Hash/#> to view the number 2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> or <SPEAKERPHONE> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
EMPTY
.
4.8.2 Store a Redial Number into the Phonebook 1. Follow Steps 1 and 2 in section 4.8.1.2. Press <MENU> and <UP/DOWN> to select ADD TO PB.3. Press <OK> and then enter the name you want to use in the phonebook. 4. Press <OK> and then modify the number, if necessary.5. Press <OK> to show <MELODY 1>.6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will be played when browsing the ringtone list. (Note: the selected melody will 7. Press <OK> to confirm, and the entry will be stored.
Note: The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned offTo turn the ringer back on, press and hold <HASH/#> again.
Note: You can still use <TALK ON> or <SPEAKERPHONE> to answer a call
To turn the keypad lock off, press and hold <STAR/*> again.only be played if you subscribe to Caller Display and the incoming number icon is displayed on the LCD.
The most recent last number will display at the top of the redial list.
of this entry.matches the stored number.)4.8.3 Delete a Redial Number 1. Follow Steps 1 and 2 in section 4.8.1
.
2. Press <MENU> and <UP/DOWN> to select DELETE.3. Press
<OK> to confirm, and the entry will be deleted.4.9 Find the Handset You can locate the handset by pressing <PAGE> on the base station. All the handsets registered to the base will produce the paging tone and show 4.8.4 Delete all Redial List entries1. In idle mode, press <DOWN> to access the redial list.2. Press <MENU> and <UP/DOWN> to select DELETE ALL3. Press <OK> to display <CONFIRM?>.4. Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>. <TALK OFF> /<C> on any handset or <PAGE> on the base again. Note: If there is an incoming call during paging, the phone will ring with the 4.10 Make an Internal Call (For multi-handset versions only) This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to incoming call instead of paging.LOCK” "PAGING" on the display. You can stop the paging by pressing <TALKON>/another handset and make conference calls. If the called handset is notanswered within 60 seconds, the called handset will stop ringing and the calling Note: If only one handset is registered to the base station, when <C/MUTE/INT>
is pressed, it will display NOT POSSIBLE
4.10.1
Intercom Another Handset1. In idle mode, press <C/MUTE/INT> and all the other registered handset 2. Enter the number of the handset that you want to call, or enter "9" to call all 3. The called handset rings and <TALK ON> or <SPEAKERPHONE> must be
Note: If only two handsets are registered to the base station, pressing
<C/MUTE/INT> will call the other handset immediately.numbers will display, along with a "9".to establish the intercom call.4.10.3 Transfer an External Call to another handset During an external call: 1. Press <MENU> and <UP/DOWN> to select INTERCOM
.
2.
Press <OK> to show all the other registered handset numbers, plus "9". 3. The external call is put on hold automatically and the called handset rings.4. Press <TALK ON> or <SPEAKERPHONE> on the called handset to establishEnter the number for the handset you want to transfer the call to.handset will return to standby mode. handsets. 5. Press <TALK OFF> on the calling handset or put the calling handset on the charging cradle to end the current call with the external party.6. The external call is transferred to the called handset.4.10.2 Call All Handsets 1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.2. Press digit key <9> to ring to all registered handsets4.10.4 Make a 3
-
way Conference Call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no additional network subscription is required.
14
During an external call:
1.
Follow Steps 1 to 4 in section 4.10.3. 2. Press and hold <STAR> on the calling handset to establish the conference callEither handset can exit the conference by pressing <TALK OFF>, leaving the other handset still connected to the external call.5 PRIVATE PHONEBOOK Each handset can store numbers. Each phonebook entry can have a maximum of 20 digits for the phone number and 12 characters for the name. You can also select different ringtones for your phonebook entries. (Note: the different ringtones only play if 5.1 Add a New Phonebook Entry In idle: PHONEBOOK and then press <OK> to access the phonebook. 2. Press <MENU> to show ADD. 3. Press <OK> and then enter the name. 4. Press <OK> and then enter the number. 5. Press <OK> and <UP/DOWN> to select the desired ringtone for your6. Press <OK> to store the phonebook entry. you subscribe to Caller Display and the incoming number matches the stored number.) Phonebook entries are stored alphabetically by name. phonebook entry. 5.2 Search a Phonebook Entry In idle: 1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press2. Enter the first letter of the name using the alphanumeric keys(e.g. if it want.5.3 View a Phonebook Entry In idle: 1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook. 2. Press <UP/DOWN> to select the desired phonebook entry. 3. Press <MENU> and <UP/DOWN> to select VIEW.4. Press <OK> and <UP/DOWN> to review the name, number and ringtone of the selected phonebook entry. Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or <RIGHT SOFT KEY> to view the remaining digits.
15
16
pressed on that handset an internal call. handset is ringing.when the
5
ALL PHONEBOOK ENTRIES.......................................................................
1
....................................................... 1ALL CALL LIST ENTRIES................MELODY ....Speakerphone
Y
our
h
a
n
d
s
e
t
'
s
loud
s
p
e
a
ke
r
is
on
.
Speakerphone
Y
our
h
a
n
d
s
e
t
'
s
lou
d
s
p
e
a
ke
r
is
on
.
ress <UP/DOWN> to select volume 1-5. The current Turn offHandset RingerNote: If there is an external call while you are on an intercom call, you'll
hear warning beeps, and you have to end the intercom all, before you can c
answer the external call.Note: If the other handset has not answered the intercom call, you can stop the intercom and return to the external call by pressing <TALK OFF> and then <UP/DOWN> to scroll to the entry you
be
gi
ns
wi
th
C,
pr
es
s t
he
2 k
ey
th
re
e t
im
es
),
P
up to 0 private phonebook entries with names and ...................................................................................
25
8
ANSWERING MACHINE
Remote operation
Using a tone-dialling phone, dial your home numberYou can also use the codes on the other side of this cardWhile your outgoing message is playing, pressKey in your remote security codeThe default code is 0000. For details of how to set a new code,see the User Guide 8.5.9.1 on page 31.
1
2
3
4
Note: <*> key must be entered while the OGM is still playing, and the 4-digit
consecutively, the line will be released
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 10 rings.You can then enter the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature.

system

Lifestyle 191

7
7
7
7
8
8
8
.....................................................................................Remote
..
Card .............
2
The
PIN should follow without any delays.. If the 4-digit Remote Access PIN is entered incorrectly three times
9
automatically.Or visit our website: www.binatoneonline.com
0
Package contents The package contains the following items:
• 1 Handset • 1 Base station • 1 Mains power adapter • 1 Telephone line cord 1 rechargeable battery pack • 1 User manual Note: If you have a Twin, Triple or Quad system, you will also have the requisite extra handset(s) and batter , and a charger pod for each extra handset.
ies
TROUBLESHOOTINGDECLARATION OF CONFORMITY
9
..................................................................................... .................................................................
10
32
33
34
GUARANTEE AND SERVICE
11
........................................................................To use your handset and base together, you must be able to establish a radio link between them. The signal between the handset and the base is in accordance with the normal standards for a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors. The signal range may decrease if there is any large metal object between the handset and the base, such as a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete. The signal strength may also be reduced by other solid structures like walls, or by other radio or electrical interference.
4
Digital Cordless Telephone Lifestyle 1910 systemBinatone Helpline (for UK only)Monday to Friday from 9:00am to 5:00pmTel: 0845 345 9677**Please note that all calls are charged at local rateTECHNICAL DETAILSStandard Frequency rangeChannel bandwidthOperating rangeOperating time Temperature rangeDigital Enhanced CordlessTelecommunication (DECT) 1.88 to 1.9 GHz 1.728 MHzUp to 300m outdoors; up to 50m indoorsStandby: 100 hours,Talking:
10 hoursBattery charge time:15 hoursOperating 0 C to 40 C(bandwidth = 20 MHz) Port specification
The port (connec ted to the mains power supply) is a
SELV port with respect to EN41003.CLEANING AND CAREDo not clean any part of your Lifestyle 19 0 system with benzene, thinners or othersolvent chemicals - this may cause permanent damage which is not covered by theGuarantee.When necessary, clean it with a damp cloth.Keep your Lifestyle 1910 system away from hot, humid conditions
or
strongand don't let it get wet.Every effort has been made to ensure high standards of reliability for your consult your supplier or the Helpline.do not try to
Electrical powerTenPao - S002CV0600030 / S002CB0600030 Charger unit: HONR – ADS-3V-06 06018 GPB / ADS-3V-06 06018 GPGTenPao - S002CV0600030 / S002CB0600030Battery Information GPI – VTHC043C02, Type NiMH (Rechargeable battery) Voltage Rating 400mAh 2.4V AAA Size Pack BYD- H-AAA400BX2, Type NiMH (Rechargeable battery) Voltage Rating 400mAh 2.4V AAA Size Pack CORUN- Ni-MHAAA400*2, Type NiMH (Rechargeable battery) Voltage Rating 400mAh 2.4V AAA Size Pack Base unit: HONR – ADS-3V-06 06018 GPB / ADS-3V-06 06018 GPG input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA , Storage -20 C to 60 Cinput 100-240VAC 50/60Hz 100mA, output 6VDC 300mA input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA Caution Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions. The port (connected to the telephone line) is aTNV port with respect to EN41003. Lifestyle 1910 system. However, if something does go wrong, pleaserepair it yourself,sunlight,
1
with Answering Machine
............................................................ 25 8.1 TURN ON/OFF THE ANSWERING MACHINE
................................ 25 8.2 LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE
..................................... 26 8.3 DELETE ALL MESSAGES IN THE ANSWERING MACHINE
.......................................................................................................... 26 8.4 RECORD MEMO
8.5 ANSWERING MACHINE SETTINGS .......................................................................... 27
3.2 Base Station Overview
1.
Press the Page button on the basestation to page your handset(s).It will ring for approximately 60 seconds. 2. CHARGING CRADLE 3.3 Display Icons and Symbols The LCD display gives you information on the current status of the telephone.
Scroll up / down the menu items / Phonebook list / Redial list / Call List
Steady when the handset is in range of the base. Flashes w hen out of
Steady when an intercom call is in progress. Flashes when there is an incoming internal call. Indicates a call is in progress on that handset.
I
ndicates that the ringer is switched off. Steady when an alarm is set. Flashes when the alarm is sounding.Indicates that the keypad is locked. Indicates when you have a new Voice Mail message. (This is a Caller Display service and is not usually available fromrange of the base or not registered to the base. UK network providers.)Indicates when the battery is fully charged. Whole icon flashes when the battery s charging. Internal block icon flashes when the battery is in final charging stage. Indicates when the battery needs charging. Flashes when low battery power level is detected. (BACK) (INT) Indicates when there are more characters or numbers in front of those Indicates when there are more characters or numbers after those being Press the MENU/OK key to access the main menu.Press the MENU/OK key to confirm the current selection.Indicates new TAM message / new call in TAM message list / call list. Press the C/MUTE key to start an intercom call.Press the C/MUTE key to go back to the previous menu level or cancelPress the C/MUTE key to clear a character, stop the alarm, or mute/unmutebeing displayed. displayed.the current action. the microphone during a call.3.4 Menu StructureIn idle mode, press <MENU/OK> Refer to the following for the menu structure.
ADD TO PB DELETEDELETE ALL DETAILSPress and hold to put base into registration mode. handset
i
to go to CALL LIST, the first option in the menu list. Press <UP> or <DOWN> to go to other options in the menu list. Press <OK> to enter a sub-menu or function. Press <Back> to go back to the previous level. Shows EMPTY or the first Call List Entry. Then<OK> for:
Main
Menu
CALL LISTPHONEBOOK
BS
SETTINGS
HS
SETTIN
GS
REGISTRATIONDEFAULTANS. MACHINE
Sub
menu
PIN? - - - -MSG PLAYBACKDELETE ALL
MEMO
TAM ON/OFFTAM SETTINGSANSWER MODETAM LANGUAGEOGM SETTINGSANSWER DELAYRECORD TIMEREMOTE ACCCHANGE PINPIN? - - - -
<UP/DOWN>Key Press
<MENU> <UP/
DOWN>
<UP/DOWN><UP/DOWN><UP/DOWN><UP/DOWN><UP/DOWN>phonebook Entry.
ADD
VIEW
EDIT
DELETEDELETE ALLPB STATUS Shows EMPTY or the first Then <OK> for:
ADD
PB STATUS
or
DELETE HSDIAL MODEFLASH TIMECHANGE PINALARM RING SETUPTONE SETUPLANGUAGERENAME HSHS DISPLAYAUTO ANSWER DATE & TIME
your answering machine (TAM) is on and flashes when a message.
Indicates that there is new
1
2
FIND / <PAGE>Flashes when there is an incoming external call.Indicates handset is in speakerphone mode.1. Press <MENU> then <UP/DOWN> to select <OK> to access the phonebook. Answering Machine (TAM) ControlNotes:1. All the keys on the handset back have no functions during a call.2. All the keys on the handset back are valid in idle mode and during message playback mode.3. When alarm time arrives, pressing any key on the handset back will stop the alarm (if snooze is off).PLAY/STOPSKIP BACKWARDTo repeat a message duringIn idle:Press to play the TAM message
In TAM message playback mode:Press to stop the message playbackplayback SKIP FORWARDTo skip to the next message duringIncrease the speaker volume duringTWO-WAY KEY:
UP
voice message playback; Increase thehandset ringer volume during ringing
DOWN
Decrease the speaker volume during voice message playback;Decrease the handset ringer volumeduring ringingDELETEPress once to delete the currentmessage during playback.In Idle: Press and hold to delete all oldNote: New voice messages will not bedeleted.On Steadily: When TAM is onFlashes: When new TAM message isreceived.TAM LED -Press twice to skip back to theprevious messageplaybackvoice messages.1 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the 1) Read and understand all the instructions. 2) Follow all warnings and instructions marked on the product. 3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4)
sink, swimming pool). 5) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 6) Unplug this product from the wall outlet and refer servicing to our Repair
When the power supply cord or plug is damaged or frayed.
If the product does not operate normally by following the operating instructions.
If the product has been dropped and the cabinet has been damaged.
If the product exhibits a distinct change in performance.
7) NEVER use your Lifestyle 1918) Do not use the telephone to report a gas leak in the vicinity of the leak. 9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only applicable with the default battery capacities
10) The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause interference and/or damage to the unit or surroundings. The manufacturer will not be held liable for damage arising from such non-compliance. 11) Do not use third party charging bays. Damage may be caused to the batteries.12) Please ensure the battery plug is inserted correctly into the socket.13) Dispose of batteries safely. Do not immerse them in water, burn them, or put them where they could get punctured.Centre under the following conditions: following: near water (for example, near a bath tub , kitchen
Keep your Lifestyle 1910 away from hot, humid conditions or strong sunlight,
se this product and don't let it get wet or u base from the telephone line and the mains socket when there are storms
in your area. Damage caused by l ightning is not covered by the guarantee.
0 outdoors during a thunderstorm-unplug the 2 INSTALLING YOUR PHONE 2.1 Connecting the base station 1) Plug the power supply and line cord 2) Plug the power adapter into a 230Vac, 3) Always use the cables provided in the boxWarning: Use only the provided adaptor, using other power supplies may cause a hazard.
50Hz mains socket, and the line cord into your 2.2 Installing and charging the batteries1) Place the supplied battery pack into the battery
3) Put the handset on the base and charge for 16 hours before using the handset for the first time. If you have aBroadband lineIf you connect your telephone to a line with insert a micro-filter between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems. a broadband connection, you will need to
telephone line socket.Warning: Install the base unit in a position wherewill reach an easilymains powerNote: The base unit needs mains power for normal operation, not just for charging the handset batteries. Use only the NiMH rechargeable battery type
2) Position the battery compartment cover over the In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband micro-filters, contact your broadband supplier. compartment with the plug insertedThe handset will give a beep when it is properlyinto the base station. cable. correctly into the socket.
b
atteries and slide up to click into place.placed on the base or charger.the mains adapter plug accessible mains socket. Never try to lengthen the provided.MENU/OKIn idle mode:Press to access the main menuIn sub-menu mode:Press to confirm the selectionDuring a call: Press to accessIntercom/Phonebook/ RedialList/ Call List
UP
In idle mode:Press to access the call listIn menu mode:Press to scroll up the menu itemsIn Phonebook list / Redial list / Call List:Press to scroll up the listDuring a call:Press to increase the earpiece volumeDuring ringing:Press to increase the ringer volumeTALK ONIn idle / predialing mode:Press to make a callIn Redial list / Call List / Phonebook :Press to make a call to the ed entry in the listDuring ringing:Press to answer a call listdisplayRECALL(also called FLASH)In idle / predialing mode:Press to insert a recallDuring a call:Press to send a recall(flash)TALK OFFDuring a call: Press to end a call and goback to idle screen In menu / editing mode: Press to go backto previous menuIn idle mode:Press and hold to power off the handset
DOWN
In idle mode:Press to access the redial listIn menu mode:Press to scroll down the menu itemsIn Phonebook list / Redial list / Call List:Press to scroll down the listDuring a call:Press to decrease the earpiece volumeDuring ringing:Press to decrease the ringer volumeCLEAR/MUTE/INTERCOMIn sub-menu mode: Press to go back to previous levelIn sub-menu mode: Press and hold to go back to idle screenIn editing / predialing mode: Press to clear a character / digit In editing / predialing mode: Press and hold to delete all the characters / digitsDuring a call: Press to mute/ unmute the microphoneIn idle mode:Press to intercom another handsetIn main menu mode: Press to go back to idle screen singal.(you may need the recall function if your phone is connected to a PBX or you use BT Calling features. SPEAKERPHONEDuring a call:Press to turn on / off the speakerphone.Call List / Phonebook entry :Press to make a call with speakerphoneDuring ringing:Press to answer a call with speakerphoneDuring answering machine message playback / call screening:Press to play message via speaker(Note: If the handset is powered off, put it on charge on the base or a charger pod to turnit back on.)3.5.1 Character Set
Key
Press1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th1 space - 1 12 A B C 2 2
3
D E F 3 3
4 G H I 4 4
5 J K L 5 56 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0, or P (Pause) if press and hold
*
*
? / \( ) *
#
Alphanumeric Editing (For phonebook name editing and renaming handset )Number Editing (For phonenumber editing,date/time editing)
Ø
# o ' , - , &Note: There are some different characters if the handset language is changed (page 21)......................................................................................1Remote
..
6
Card .............TABLE OF CONTENTS
1
IMPORTANT SAFETY INSTRUCTIONS...........................................................
2
INSTALLING YOUR PHONE............................................................................ 5
2.1 CONNECTING THE BASE STATION .......................................................................... 5
2.2 INSTALLING AND CHARGING THE BATTERIES...................................................... 5
3
GETTING TO KNOW YOUR PHONE................................................................ 63.1 HANDSET
O
VERVIEW................................................................................................ 63.2 B
ASE
S
TATION
O
VERVIEW .....................................................................................
3. DISPLAY
I
CONS AND
S
YMBOLS............................................................................... 83. M
ENU
S
TRUCTURE....................................................................................................3. TEXT AND
D
IGIT
E
NTRY
T
ABLE
............................................................................... 10
4
USING YOUR PHONE......................................................................................1
4.1 MAKE A CALL ............................................................................................................. 1
4.1.1 PREPARATORY DIALLING .......................................................................................
4.1.2 DIRECT DIALLING.....................................................................................................
4.1.3 CALL FROM THE PHONEBOOK...............................................................................1 1
4.1.4 CALL FROM THE CALL LIST
................................................................................
4.1.5 CALL FROM THE REDIAL LIST4.1.6
CALL TIMER ..............................................................................................................11
4.2
ANSWER A CALL ....................................................................................................... 11
4.3
END A CALL ................................................................................................................12
4.4
ADJUST EARPIECE VOLUME.................................................................................... 12
4.5 MUTE A CALL ............................................................................................................. 12
4.6
.................................................................................. 12
4.7 TURN ON THE KEYPAD LOCK ..................................................................................
4.8
REDIAL THE LAST NUMBER ..................................................................................... 12
4.8.1 REDIAL A NUMBER FROM THE REDIAL LIST.........................................................12
4.8.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK
4.8.3
DELETE A REDIAL NUMBER ..................................................................................13
4.8.4 DELETE
...................................................................... 13
4.9
FIND THE HANDSET................................................................................................... 13
4.10 MAKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY )................ . 13
4.10.1
INTERCOM ANOTHER HANDSET..........................................................................14
4.10.2
CALL ALL HANDSETS.............................................................................................14
4.10.3
TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET................................ 14
4.10.4 MAKE A 3-WAY CONFERENCE CALL....................................................................14
5
PRIVATE PHONEBOOK...................................................................................1
5.3 VIEW A PHONEBOOK ENTRY................................................................................... 15
5.1 ADD A NEW PHONEBOOK ENTRY........................................................................... 15
5.2 SEARCH FOR A PHONEBOOK ENTRY....................................................................15
3
4
5
1
1
11
11
5
(ONLY AVAILABLE WITH CALLER DISPLAY) ...... ...
TU
RN OFF HANDSET RIN
GER
ALL REDIAL LIST ENTRIES
3
..........................................
13
12
11
11
8
9
CHARACTER SET
10
3.5.1 .....................................................................................................
2
COMPRESSION 4 USING YOUR PHONE4.1 Make a Call 4.1.1 Preparatory DiallingEnter the phone number and press <TALK ON> or <SPEAKERPHONE>dial the number. When entering the number,if you to delete digits.4.1.2 Direct Dia lingPress <TALK ON> or <SPEAKERPHONE> to connect to the line and then4.1.3 Call from the phonebook Press <MENU/OK>, then <DOWN>, then <MENU/OK> again to access the phonebook and press <UP/DOWN> to Press <TALK ON> or <SPEAKERPHONE> to dial out the selected phonebook entry.(Note: if you enter a wrong digit you cannot correct it with the <C> key.)select the desired phonebook entry. 4.1.4 Call from the Call List (only available with Caller Display)Press <UP> to access the Call List and press <UP/DOWN> to select the desiredPress <TALK ON> or <SPEAKERPHONE> to dial out the selected Call List entry.Note: You can also access the Call List by pressing <MENU/OK> twice.4.1.5 Call from the redial list
Press <DOWN> to access the redial list and press <UP/DOWN> to select the
Note: The alphanumeric keys provide a short-cut to find entries beginning with the corresponding letters.Call List entry. desired redial number. Press <TALK ON> or <SPEAKERPHONE> to dial out the selected redial number. 4.1.6 Call timer Your handset automatically times the duration of every call. The call timer is displayed as soon as you answer a call or 15 seconds after It is shown in hours, minutes and seconds4.2 Answer a CallIf the handset is not on the charging cradle:
When the phone rings, press <TALK ON> or <SPEAKERPHONE> to answer a call.
Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or charger will answer the call automatically, and no buttons need to be format (HH:MM:SS).pressed.enter the phone number. to connect to the line and tomake a mistake, press <C>
dialling and remains on the screen for 5 seconds after the end of the call.
l

Anvisning

Se manualen för Binatone Lifestyle 1910 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Binatone Lifestyle 1910? Ställ din fråga här

Behöver du hjälp?

Har du en fråga om Binatone Lifestyle 1910 som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Binatone Lifestyle 1910-ägare att ge dig ett bra svar.

Antal frågor: 0

Binatone Lifestyle 1910 – specifikationer

Nedan hittar du produkt- och manualspecifikationerna för Binatone Lifestyle 1910.

Luta dig tillbaka och njut av de kristallklara bilderna som 2 miljoner pixlar återger. Upplösningen på 1920 x 1080 pixla...
Allmänt
Varumärke Binatone
Modell Lifestyle 1910
Produkt Telefon
Språk Engelsk
Filtyp Användarmanual (PDF)
Prestanda
Modell DECT-telefon
Inbyggd telefonsvarare Ja
Inspelningstid 15 min
Maximal räckvidd inomhus 50 m
Maximal räckvidd utomhus 300 m
Antal melodier 5
Design
Monteringssätt Bord
Produktens färg Svart, silver
Telefonfunktioner
Högtalartelefon Ja
Funktioner för flera telefonlurar 2
Telefonbokskapacitet 20 poster
Call management
Namn och uppringnings-ID Ja
Återuppringning Ja
Poster i samtalslogg 10
Samtalstimer Ja
Display
Inbyggd display Ja
Displaytyp LCD
Färg på bakgrundsbelysning Orange
Pekskärm Nej
Anslutningar
Trådlösa anslutningar Nej
Likströmsingång Ja
Övrigt
Frekvensband 1.88 - 1.9 GHz
Mac-kompatibel Nej
Monteringsbar på väggen Ja
Miljökrav
Temperatur vid drift 0 - 40 ° C
Temperaturintervall (förvaring) -20 - 60 ° C
Strömtillförsel
Samtalstid 10 h
Stand-by tid 100 h
Batteriteknik Nickel-metallhydrid (NiMH)
visa mer

Vanliga frågor

Hittar du inte svaret på din fråga i manualen? Svaret kan finnas här nedan i vanliga frågor gällande Binatone Lifestyle 1910.

Är din fråga inte listad? Ställ din fråga här

Inga resultat