Brother P-touch H105

Brother P-touch H105 bruksanvisning

(1)
  • Follow these guidelines to avoid the risk of fire, burns, injury,
    electric shocks, rupture, overheating, abnormal odours or
    smoke.
    Always use the specified voltage and the recommended AC adapter (AD-24ES) for
    the P-touch to prevent any damage or failure.
    Do not touch the P-touch during a lightning storm.
    Do not use the P-touch/AC adapter in places of high humidity (such as bathrooms).
    Do not overload the power cord.
    Do not place heavy objects on, or damage the power cord or plug. Do not forcibly
    bend or pull the power cord. Always hold the AC adapter carefully when
    disconnecting from the power outlet.
    Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that
    is loose.
    Do not allow the P-touch/AC adapter/power plug/batteries to get wet, for example,
    by handling them with wet hands or spilling beverages onto them.
    Since loss of eyesight may result when leaked fluid from batteries gets into your
    eyes, immediately rinse your eyes with a large amount of clean water, and then
    seek medical attention.
    Do not disassemble or modify the P-touch/AC adapter/batteries.
    Do not allow a metal object to contact both the plus and minus ends of a battery.
    Do not use sharp objects, such as tweezers or a metallic pen, to change the
    batteries.
    Do not throw the batteries into fire or expose to heat.
    Disconnect the AC adapter, remove batteries immediately and stop using the P-
    touch if you notice abnormal odour, heat, discolouration, deformation or anything
    unusual while using or storing it.
    Do not use a damaged or leaking battery as the fluid may get on your hands.
    Do not use a deformed or leaking battery or one with a damaged label. There is a
    possibility of generating heat.
    Follow these guidelines to avoid personal injury, liquid
    leakage, burns or heat.
    When the P-touch is not being used, store it out of the reach of children. In addition,
    do not allow children to put P-touch parts or labels in their mouths. If any object has
    been swallowed, seek medical attention.
    Do not touch metal parts near the print head immediately after printing.
    Do not touch the cutter blade.
    If leaked fluid from batteries gets onto your skin or clothes, immediately rinse them
    with clean water.
    Remove the batteries and disconnect the AC adapter if you do not intend to use
    the P-touch.
    Do not use a battery other than that specified. Do not use combinations of old and
    new batteries or combinations of different types, different charging levels, different
    manufacturers or different models. Do not insert a battery with its plus and minus
    ends reversed.
    Do not drop or hit the P-touch/AC adapter.
    Do not press on the LCD display.
    Do not put your finger inside the P-touch when you close the cassette cover.
    Before using Ni-MH rechargeable batteries, carefully read the instructions for the
    batteries and battery charger, and be sure to use them correctly.
    When using Ni-MH rechargeable batteries, charge the batteries with a specialized
    battery charger before using the batteries.
    Depending on the location, material, and environmental conditions, the label may
    unpeel or become irremovable, the colour of the label may change or be
    transferred to other objects. Before applying the label, check the environmental
    conditions and the material.
    Do not use the P-touch in any way or for any purpose not described in this guide.
    Doing so may result in accidents or damage to the P-touch.
    Use Brother TZe tapes with the P-touch.
    Only use a soft, dry cloth to clean the P-touch; never use alcohol or other organic
    solvents.
    Use a soft wipe to clean the print head; never touch the print head directly.
    Do not put any foreign objects into any part of the P-touch.
    Do not place the P-touch, batteries or AC adaptor in direct sunlight or rain, near
    heaters or other appliances, or in any location exposed to extremely high or low
    temperatures (e.g. on the dashboard or in the back of your car). Avoid high
    humidity or dusty locations.
    Do not apply excessive pressure to the cutter lever.
    Do not try to print if the cassette is empty; it will damage the print head.
    Do not pull the tape while printing or feeding; it will damage the tape and P-touch.
    Any data stored in memory will be lost due to failure or repair of the P-touch, or if
    the battery expires.
    The P-touch is not equipped with a charging feature for rechargeable batteries.
    The length of the printed label may differ from the displayed label length.
    A protective clear plastic sticker is placed over the display during manufacturing
    and shipping. This sticker should be removed prior to use.
    When power is disconnected for more than three minutes, all text, format settings
    and any text files stored in the memory will be cleared.
    For PT-H100/GL-H100
    For PT-H105/GL-H105
    Safety Precautions
    Indicates a potentially hazardous
    situation which, if not avoided,
    could result in death or serious
    injuries.
    WARNING
    Indicates a potentially hazardous
    situation which, if not avoided,
    may result in minor or moderate
    injuries.
    General Precautions
    CAUTION
    Declaration of Conformity
    (Europe only)
    We, Brother Industries, Ltd.
    15-1, Naeshiro-cho, Mizuho-ku,
    Nagoya 467-8561 Japan
    declare that this product is in conformity with the essential requirements of all relevant directives
    and regulations applied within the European Community.
    The Declaration of Conformity (DoC) can be downloaded from our website.
    Visit http://solutions.brother.com/ and:
    select “Europe”
    select your country
    select your model
    select “Manuals” and your language, then click “Search”
    select Declaration of Conformity
    click “Download”
    Your Declaration will be downloaded as a PDF file.
    Declaration of Conformity
    (Europe only)
    We, Brother Industries, Ltd.
    15-1, Naeshiro-cho, Mizuho-ku,
    Nagoya 467-8561 Japan
    declare that this product and AC adapter are in conformity with the essential requirements of all
    relevant directives and regulations applied within the European Community.
    The Declaration of Conformity (DoC) can be downloaded from our website.
    Visit http://solutions.brother.com/ and:
    select “Europe”
    select your country
    select your model
    select “Manuals” and your language, then click “Search”
    select Declaration of Conformity
    click “Download”
    Your Declaration will be downloaded as a PDF file.
    Power Supply and Tape Cassette
    Open the cassette cover by pressing the
    above indicated area at the top end of the
    P-touch.
    If a tape cassette is already installed, remove it by
    pulling it straight up. Also, if batteries are already
    installed, remove them.
    Make sure that the power is turned off when
    replacing batteries or tape cassettes.
    Insert six new AAA alkaline batteries
    (LR03) or fully charged Ni-MH batteries
    (HR03), making sure that their poles
    point in the correct directions.
    Users of alkaline batteries:
    Always replace all six batteries at the
    same time with brand new ones.
    Users of Ni-MH batteries:
    Always replace all six batteries at the
    same time with fully charged ones.
    NOTE
    Visit us at http://solutions.brother.com/ for the latest
    information about the recommended batteries.
    Insert a tape cassette, making sure that
    it snaps into place.
    Make sure that the end of the tape feeds under
    the tape guides.
    Use only Brother TZe tapes with P-touch.
    Securely close the cassette cover, making
    sure that it snaps into place.
    NOTE
    When using optional AC adapter (AD-24ES)
    1. Connect the AC adapter into the AC adapter socket on
    the bottom of the P-touch.
    2. Insert the plug into the nearest standard electrical
    outlet. For memory back up, we recommend using
    AAA alkaline batteries (LR03) or Ni-MH batteries
    (HR03) together with the AC adapter.
    1
    Tape cutter
    lever
    Cassette
    cover
    2
    Print head
    3
    Toothed
    wheel
    Cutter’s
    edge
    End of tape
    Tape
    exit slot
    Tape guide
    4
    AC adapter socket
    NOTE
    The LCD shows one row of 12 characters; however, the text that
    you enter can be up to 80 characters in length.
    While selecting the settings, press the Space key to go back to
    the default item.
    LCD Display & Keyboard
    18
    19
    5
    6
    7
    20
    9
    1
    2
    3
    4
    21
    22
    12
    11
    10
    14 23
    13
    24
    25
    16
    17
    15
    8
    1. Size
    2. Cursor
    3. Caps
    4. Underline/Frame
    5. Width
    6. Style
    7. Label Length
    If a specific label length has been
    selected, also appears.
    8. Guidance (left, right)
    9. Power key
    10. Cursor key : Right
    11. Cursor key : Left
    12. Backspace key
    13. Size key
    14. Style key
    15. Character keys
    16. Caps key
    17. Symbol key
    18. Menu key
    19. Clear key
    20. Print key
    21. Enter key
    22. Auto Designs key
    23. Frame key
    24. Accent key
    25. Space key
    The print preview is a generated image of the label, and may
    differ from the actual label when printed.
    Label length shown on LCD may slightly differ from the actual
    label length when printed.
    1 Start your P-touch.
    Supply power by using six AAA batteries, and then press .
    2 Set the language.
    3 Set the unit of measurement.
    The default setting is [mm].
    NOTE
    The P-touch automatically turns off if no keys are pressed within
    five minutes.
    To cancel any operation, press .
    Initial Settings
    / [Language] /
    [English/Español/Français/Hrvatski/Italiano/Magyar/
    Nederlands/Norsk/Polski/Português/Portug. (BR)/
    Română/Slovenski/Slovenský/Suomi/Svenska/Türkçe/
    Čeština/Dansk/Deutsch] .
    / [Unit]
    / [inch/mm] .
    Troubleshooting
    X Error message X What to do when...
    Message Cause/Remedy
    Low Battery!
    The batteries are weak.
    If using AAA alkaline batteries: Replace them with new
    ones.
    If using Ni-MH batteries: Charge them fully.
    Battery Dead
    The installed batteries have expired.
    Invalid!
    An invalid number was entered as the label length.
    (This is not displayed in Auto Designs).
    No Text!
    You tried to print a text file when there is no data
    stored in the memory.
    is pressed when no text is entered.
    You tried to select Text Preview or Cable Label when
    no text is entered.
    was pressed when no text was entered while
    using the DECO MODE or Auto Designs.
    Line Limit!
    You tried to enter a 3rd line by pressing .
    You tried to print or preview two lines of text while
    3.5mm or 6 mm tape is installed. Install tape of a
    larger size.
    No Cassette!
    You tried to print a label when there is no cassette
    installed.
    Cutter Error
    The tape cutter lever was used during the printing
    process.
    Text Full!
    The maximum number of characters (80 characters for
    regular text, 50 characters for Auto Designs and DECO
    MODE) have already been entered.
    Text Limit!
    With the DECO MODE function:
    Since the number of entered characters exceeds the
    label length, reduce the text.
    All other functions:
    Since the number of entered characters exceeds the
    label length, reduce the text or select [Auto] as the label
    length.
    No Frame OK?
    Printing on 3.5mm tape with invalid Frame setting ON.
    (Select to print with no Frame, to
    cancel).
    OK to Feed?
    Feeding tape after printing when [Chain Print] is
    selected. Refer to “Setting Margin”.
    Insert 12mm
    Only 12mm tapes are available for use with DECO
    MODE function.
    Wrong Tape!
    Use a tape cassette with the mark.
    Message Cause/Remedy
    Problem Solution
    The display stays blank
    after you have turned on
    the P-touch.
    Check that the batteries are correctly
    inserted.
    If the batteries are weak, replace them.
    When the label is printed
    out, the margin(space) is
    too large on both sides of
    the text.
    See “Setting Margin” in this users guide
    and select [Half] or [Narrow] to have
    smaller margins for your label.
    The P-touch does not
    print, or the printed
    characters are not formed
    properly.
    Check that the tape cassette has been
    inserted correctly.
    If the tape cassette is empty, replace it.
    Check the cassette cover is properly
    closed.
    The setting has cleared
    on its own.
    If the batteries are weak, replace them.
    When power is disconnected for more
    than three minutes, all text & formats in
    the display will be lost. Language and Unit
    settings will also be cleared.
    A blank horizontal line
    appears through the
    printed label.
    There may be some dust on the print
    head. Remove the tape cassette and use
    a dry cotton swab to gently wipe the print
    head with an up-and-down motion.
    The print head can be cleaned more
    easily if the optional print head cleaning
    cassette (TZe-CL3) is used.
    The P-touch has “locked
    up” (i.e., nothing happens
    when a key is pressed,
    even though the P-touch
    is on).
    Refer to “Resetting the P-touch”.
    The power turns off when
    you try to print.
    The batteries may be weak. Replace
    them.
    Check that the batteries are correctly
    inserted.
    If the batteries are weak, replace them.
    The tape does not feed
    properly or the tape gets
    stuck inside the P-touch.
    Check that the end of the tape feeds
    under the tape guides.
    The cutter lever is used while printing. Do
    not touch the cutter lever during printing.
    All text and format
    settings need to be
    cleared to create a new
    label.
    Press and select [Text&Format].
    The LCD is set to an
    incorrect language.
    Refer to “Initial Settings”.
    Contact Information
    Contact may differ by country.
    See the Website at http://www.brother.eu/
    Problem Solution
    With your P-touch H100/H105/GL-H100/GL-H105, you can create
    labels for multiple applications. Select from the many frames,
    character sizes and styles to design beautiful custom labels. In
    addition, the variety of tape cassettes available allows you to print
    labels with different widths and exciting colours.
    Read this manual carefully before you begin and keep the manual in
    a handy place for future reference.
    For PT-H105/GL-H105, it is possible to use an adaptor. The use of
    an adaptor is optional and can be purchased if required. All
    references in this manual to the adapter are for PT-H105/GL-H105
    only.
    Printed in China
    LAD551001
    English
    User’s Guide
    *
    1
    Visit us at http://solutions.brother.com/ for the latest
    information about the recommended batteries.
    Specifications
    Dimensions:
    (W x D x H)
    Approx. 110(W) × 208(D) × 59(H)mm
    Weight: Approx. 390 g
    (without batteries and tape cassette)
    Power supply: Six AAA alkaline batteries (LR03)
    Six AAA Ni-MH batteries (HR03)*
    1
    Optional AC adapter (AD-24ES)
    Tape cassette: Brother TZe tape (width)
    3.5mm, 6mm, 9mm, 12mm
Brother P-touch H105

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Brother P-touch H105? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Brother P-touch H105 att svara på din fråga.

Se manualen för Brother P-touch H105 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 9.2. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Brother P-touch H105? Ställ din fråga här

Brother P-touch H105 – specifikationer

Allmänt
Varumärke Brother
Modell P-touch H105
Produkt Etikettskrivare
EAN 4977766715003
Språk Engelsk
Filtyp PDF

Vanliga frågor

Nedan hittar du de vanligaste frågorna om Brother P-touch H105 .

Är din fråga inte listad? Ställ din fråga här

Bruksanvisni.ng

Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

Bruksanvisni.ng

© Copyright 2020 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer