Casio G-Shock Classic GW-M5610-1ER

Casio G-Shock Classic GW-M5610-1ER bruksanvisning

(1)
  • Operation Guide 3159
    1
    MO1005-EA
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully.
    Keep the watch exposed to bright light
    The electricity generated by the solar cell of the watch is
    stored by a rechargeable battery. Leaving or using the
    watch where it is not exposed to light causes the battery
    to run down. Make sure the watch is exposed to light as
    much as possible.
    When you are not wearing the watch on your wrist,
    position the face so it is pointed at a source of bright
    light.
    You should try to keep the watch outside of your sleeve
    as much as possible. Charging is reduced significantly if
    the face is covered only partially.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    Bright Light
    Solar cell
    All
    functions
    enabled
    LEVEL 1
    LEVEL 2
    LEVEL 3
    LEVEL 4
    Charge
    Rechargeable battery
    Bright Light
    Electrical
    energy
    Solar cell
    (Converts light to
    electrical power.)
    Battery charges in the light. Battery discharges in the dark.
    The watch continues to operate, even when it is not exposed to light. Leaving the
    watch in the dark can cause the battery to run down, which will result in some watch
    functions to be disabled. If the battery goes dead, you will have to re-configure watch
    settings after recharging. To ensure normal watch operation, be sure to keep it
    exposed to light as much as possible.
    LEVEL 1
    LEVEL 2
    LEVEL 3
    LEVEL 4
    Some or all
    functions
    disabled
    Dis-
    charge
    The actual level at which some functions are disabled depends on the watch model.
    Frequent display illumination can run down the battery quickly and require charging.
    The following guidelines give an idea of the charging time required to recover from a
    single illumination operation.
    Approximately 5 minutes exposure to bright sunlight coming in through a window
    Approximately about 8 hours exposure to indoor fluorescent lighting
    Be sure to read “Power Supply” for important information you need to know
    when exposing the watch to bright light.
    If the display of the watch is blank...
    If the display of the watch is blank, it means that the watch’s Power Saving function
    has turned off the display to conserve power.
    See “Power Saving Function” for more information.
    Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
    or loss suffered by you or any third party arising through the use of this product or
    its malfunction.
    About This Manual
    Depending on the model of your watch, display text appears either as dark figures
    on a light background or light figures on a dark background. All sample displays in
    this manual are shown using dark figures on a light background.
    Button operations are indicated using the letters shown in the illustration.
    Each section of this manual provides you with the information you need to perform
    operations in each mode. Further details and technical information can be found in
    the “Reference” section.
    General Guide
    Press C to change from mode to mode.
    In any mode (except when a setting screen is on the display), press B to illuminate
    the display.
    Timekeeping Mode
    Press C.
    Countdown Timer Mode Stopwatch Mode
    Alarm Mode
    World Time Mode
    Radio-controlled Atomic Timekeeping
    This watch receives a time calibration signal and updates its time setting accordingly.
    This watch is designed to pick up the time calibration signals transmitted in Germany
    (Mainflingen), England (Anthorn), the United States (Fort Collins), China (Shangqiu),
    and Japan (Fukushima, Fukuoka/Saga).
    Current Time Setting
    This watch adjusts its time setting automatically in accordance with a time calibration
    signal. You also can perform a manual procedure to set the time and date, when
    necessary.
    The first thing you should do after purchasing this watch is to specify your
    Home City (the city where you normally will use the watch). For more
    information, see “To specify your Home City”.
    When using the watch outside the areas covered by the time signal transmitters, you
    will have to adjust the current time setting manually as required. See “Timekeeping”
    for more information about manual time settings.
    The U.S. time calibration signal can be picked up by the watch while in North
    America. The term “North America” in this manual refers to the area that consists of
    Canada, the continental United States, and Mexico.
    As of December 2009, China does not use Daylight Saving Time (DST). If China
    does go to the Daylight Saving Time system in the future, some functions of this
    watch may no longer operate correctly.
    Using this watch in a country covered by a time calibration that is different from the
    countries it supports may result in incorrect time indication due to local application of
    summer time, etc.
    To specify your Home City
    1. In the Timekeeping Mode, hold down A until the city
    code starts to flash, which indicates the setting screen.
    2. Press D (east) and B (west) to select the city code
    you want to use as your Home City.
    LIS, LON : Lisbon, London
    MAD, PAR, ROM, BER, STO : Madrid, Paris,
    Rome, Berlin, Stockholm
    ATH : Athens
    MOW : Moscow
    HKG, BJS, TPE : Hong Kong, Beijing, Taipei
    SEL, TYO : Seoul, Tokyo
    HNL : Honolulu
    ANC : Anchorage
    YVR, LAX: Vancouver, Los Angeles
    YEA, DEN
    : Edmonton, Denver
    MEX, CHI : Mexico City, Chicago
    MIA, YTO, NYC: Miami, Toronto, New York
    YHZ : Halifax
    YYT : St.Johns
    PM indicator
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    City code
    Hour : Minutes
    Seconds
    3. Press A to exit the setting screen.
    Normally, your watch should show the correct time as soon as you select your Home
    City code. If it does not, it should adjust automatically after the next auto receive
    operation (in the middle of the night). You also can perform manual receive or you
    can set the time manually.
    The watch will receive the time calibration signal automatically from the applicable
    transmitter (in the middle of the night) and update its settings accordingly. For
    information about the relationship between city codes and transmitters, see
    “Important!” under “Time Calibration Signal Reception” and “Transmitters”.
    See the maps under “Approximate Reception Ranges” for information about the
    reception ranges of the watch.
    You can disable time signal reception, if you want. See “To turn auto receive on and
    off” for more information.
    Under factory default settings, auto receive is turned off for all of the following city
    codes: MOW (Moscow), HNL (Honolulu), and ANC (Anchorage). For details about
    turning on auto receive for these city codes, see “To turn auto receive on and off”.
    Time Calibration Signal Reception
    There are two different methods you can use to receive the time calibration signal:
    auto receive and manual receive.
    Auto Receive
    With auto receive, the watch receives the time calibration signal automatically up to
    six times a day (five times a day for the Chinese calibration signal). When any auto
    receive is successful, the remaining auto receive operations are not performed. For
    more information, see “About Auto Receive”.
    Manual Receive
    Manual receive lets you start a time calibration receive operation with the press of a
    button. For more information, see “To perform manual receive”.
    Important!
    When getting ready to receive the time calibration signal, position the watch as
    shown in the nearby illustration, with its 12 o’clock side pointing towards a window.
    This watch is designed to receive a time calibration signal late at night. Because of
    this, you should place the watch near a window as shown in the illustration when you
    take it off at night. Make sure there are no metal objects nearby.
    12 o’clock
    or
    Make sure the watch is facing the right way.
Casio G-Shock Classic GW-M5610-1ER

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Casio G-Shock Classic GW-M5610-1ER? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Casio G-Shock Classic GW-M5610-1ER att svara på din fråga.

Se manualen för Casio G-Shock Classic GW-M5610-1ER helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.6. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Casio G-Shock Classic GW-M5610-1ER? Ställ din fråga här

Casio G-Shock Classic GW-M5610-1ER – specifikationer

Allmänt
Varumärke Casio
Modell G-Shock Classic GW-M5610-1ER
Produkt Klocka
EAN 4971850966166
Språk Engelsk
Filtyp PDF
Tekniska data
Stöttålig
Radiosignalmottagare EU, US, JP, CH
Världstidsfunktion
Stoppur
Stoppurets noggrannhet 0.01
Stoppurets mätningskapacitet 24 h
Nedräkningstimer
Intervall för nedräkningstimer 1 - 1440
Larmfunktion
Snooze funktion
Kalender
Vattentät
Vattentålig upp till 20ATM
Mekanism typ Tough Solar
Kronograf -
Kronometer -
Typ av urtavla -
Veckodag indikation
Design
Klockglas typ Mineralglas
Material, hölje Harts
bandmaterial Harts
Höljefärg Svart
Band färg Svart
Modell Armbandsur
Föreslagen målgrupp Unisex
Urtavlan färg Svart
Design -
Formfaktor Rektangel
Strömtillförsel
Batterinivåindikator
Vikt & dimension
Bredd 43.2
Djup 12.7
Höjd 46.7
Vikt 51.7

Vanliga frågor

Nedan hittar du de vanligaste frågorna om Casio G-Shock Classic GW-M5610-1ER .

Är din fråga inte listad? Ställ din fråga här

Bruksanvisni.ng

Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

Bruksanvisni.ng

© Copyright 2020 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer