Congratulations upon your selection of this CASIO watch. To get the most out of yourpurchase, be sure to read this manual carefully.ApplicationsThe built-in sensors of this watch measure direction and temperature. Measuredvalues are then shown on the display. Such features make this watch useful whenhiking, mountain climbing, or when engaging in other such outdoor activities.Warning!• The measurement functions built into this watch are not intended for use in takingmeasurements that require professional or industrial precision. Values producedby this watch should be considered as reasonably accurate representations only.• When engaging in mountain climbing or other activities in which losing your waycan create a dangerous or life-threatening situation, always be sure to use asecond compass to confirm direction readings.• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for anydamage or loss suffered by you or any third party arising through the use of thisproduct or its malfunction.About This Manual• Depending on the model of your watch, display textappears either as dark figures on a light background orlight figures on a dark background. All sample displaysin this manual are shown using dark figures on a lightbackground.• Button operations are indicated using the letters shownin the illustration.• Each section of this manual provides you with theinformation you need to perform operations in eachmode. Further details and technical information can befound in the “Reference” section.
(Light)
(Light)
General Guide
•The illustration below shows which buttons you need to press to navigate between
modes.
•In any mode (except when a setting screen is on the display), press B to illuminate
the display.
•You can enter the Digital Compass/Thermometer Mode from the Timekeeping Mode
by pressing D. To enter from another mode, first use C to enter the Timekeeping
Mode, and then press D.
Stopwatch Mode
World Time Mode
Countdown Timer
Mode
Alarm Mode
Press C.
Timekeeping Mode
Digital Compass/
Thermometer Mode
▲
▲
Press D.
Press C.
▲
▲
▲
▲
▲
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date!
This watch is preset with a number of city codes, each of
which represents the time zone where that city is located.
When setting the time, it is important that you first select
the correct city code for your Home City (the city where
you normally use the watch). If your location is not
included in the preset city codes, select the preset city
code that is in the same time zone as your location.
•Note that all of the times for the World Time Mode city
codes are displayed in accordance with the time and
date settings you configure in the Timekeeping Mode.
Day of week
Month – Day
Hour : Minutes
Seconds
To set the time and date
1. In the Timekeeping Mode, hold down A until the city code starts to flash, which
indicates the setting screen.
2. Use D and B to select the city code you want.
•Make sure you select your Home City code before changing any other setting.
•For full information on city codes, see the “City Code Table”.
3. Press C to move the flashing in the sequence shown below to select the other
settings.
Second
Hour
12/24-Hour
Format
Minute
Year
Month
Day
Temperature
Unit
City Code
DST
•The following steps explain how to configure timekeeping settings only.
4. When the timekeeping setting you want to change is flashing, use D and/or B to
change it as described below.
To do this:
Change the city code
Toggle between Daylight Saving Time
(
) and Standard Time ().
Toggle between 12-hour (
12H
) and
24-hour (
24H
) timekeeping.
Reset the seconds to
00
Change the hour or minute
Do this:
Use D (east) and B
(west).
Press D.
Press D.
Press D.
Use D (+) and B (–).
Screen
5. Press A to exit the setting screen.
•For details about configuring temperature display settings, see “To specify the
temperature display unit”.
•See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
Use D (+) and B (–).Change the year
Change the month or day
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (
ON
displayed) and Standard Time (OFF displayed).
4. Press A to exit the setting screen.
•The DST indicator appears to indicate that Daylight
Saving Time is turned on.
DST indicator
On/Off status
Digital Compass/Thermometer
You can take direction readings and temperature readings in the Digital Compass/
Thermometer Mode.
Direction readings are taken by the watch’s built-in magnetic bearing sensor and
displayed as one of 16 directions. A temperature sensor is used for temperature
readings.
•See “Digital Compass” for more information about the digital compass.
•See “Thermometer” for more information about the thermometer.
To enter and exit the Digital Compass/Thermometer Mode
1. While in the Timekeeping Mode, press D to enter the
Digital Compass/Thermometer Mode.
•The watch will start to take direction and temperature
readings. After about two seconds, the direction that
the 12 o’clock position of the watch is facing will be
indicated and the current temperature reading will
appear on the display.
•Direction readings will be taken each second for about
10 seconds, and then stop automatically.
•Temperature readings will be taken every two
seconds for about 10 seconds, and then stop
automatically.
•To perform direction and temperature readings for
another 10 seconds, press D again.
2. Press C to return to the Timekeeping Mode.
•For information about using the digital compass, see “To
take a direction reading”.
•For information about using the thermometer, see “To
take a temperature reading”.
12 o’clock position
Current time
During readings
▲
About two
seconds
Thermometer
The watch takes temperature readings automatically whenever you enter the Digital
Compass/Thermometer Mode. In addition, you can take readings manually by
performing the procedure below.
•You can calibrate the temperature sensor if you think readings are wrong for some
reason.
•You can select either Celsius (°C) or Fahrenheit (°F) as the temperature unit.
Se manualen för Casio Twin Sensor SGW100-1V helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 14 personer med ett genomsnitt på 8.5. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Casio Twin Sensor SGW100-1V? Ställ din fråga här
Har du en fråga om Casio och finns inte svaret i manualen?
Få uppdateringar om lösningar
Få svar på dina frågor
Fråga och svar
Antal frågor: 1
A
Abdirizak 10 januari 2021
Please help my watch shows only the time between 00:00 - 09:00. It never reach 11:00 or 12:00 pm. The real time is 12:15pm but the watch shows 02:00.
Casio Twin Sensor SGW100-1V är en sportklocka med många funktioner. Klockan har kalender, stoppur, världstidsfunktion och termometer. Den har också elektronisk kompass för navigering. Klockan har en LCD-skärm och ett bälte gjort av resin-material som är bekvämt att bära. Klockan har en vikt på 55 gram och en storlek på 51,5 x 47,6 x 13,2 millimeter. Batteriet är av typen CR2025 och klockan är vattentät upp till 200 meter djup.
Casio Twin Sensor SGW100-1V är en sportklocka som är idealisk för personer som utövar utomhussporter. Klockan har alla viktiga funktioner som behövs under träningspass, inklusive stoppur och termometer. Elektronisk kompass gör det enklare att navigera i okända områden och klockan visar också tiden i olika delar av världen. LCD-skärmen är enkel att läsa och det bekväma resin-bältet håller klockan säkert på plats under aktivitet.
Med sin robusta konstruktion och hög kvalitet kommer Casio Twin Sensor SGW100-1V att pålitligt visa tiden och informationen på skärmen år efter år. Klockan är lämplig för personer som vill ha en funktionell och pålitlig sportklocka för en aktiv livsstil.
Hittar du inte svaret på din fråga i manualen? Svaret kan finnas här nedan i vanliga frågor gällande Casio Twin Sensor SGW100-1V.
Vad är vikten på Casio Twin Sensor SGW100-1V?
Casio Twin Sensor SGW100-1V har en vikt på 55 g.
Behöver jag stänga av min sportklocka på natten?
Det kan vara en bra idé att stänga av din sportklocka på natten för att förlänga batteriets livslängd.
Behöver jag internet för att använda GPS?
Nej, inget internet krävs för att ta emot GPS-data.
Vad står förkortningen GPS för?
Förkortningen GPS står för Global Positioning System.
Vad är en GPS?
En GPS är ett system som kan användas över hela världen för att bestämma sin position med hjälp av satelliter.
Hur mycket ska man träna per vecka som vuxen?
För en vuxen rekommenderas minst 2,5 timmar måttlig till intensiv träning per vecka. Den bör helst fördelas på flera dagar.
Vad är den normala hjärtfrekvensen för en vuxen i vila?
En normal vilopuls för en vuxen är mellan 60 och 100 slag per minut.
Vad är den högsta hjärtfrekvensen för en vuxen?
Som tumregel kan du ta 220 minus din ålder för att räkna ut din högsta hjärtfrekvens.
Vad är Bluetooth?
Bluetooth är ett sätt att utbyta data trådlöst mellan elektroniska enheter via radiovågor. Avståndet mellan de två enheterna som utbyter data kan i de flesta fall vara högst tio meter.
Är manualen för Casio Twin Sensor SGW100-1V tillgänglig påSvenska?
Tyvärr är manualen för Casio Twin Sensor SGW100-1V inte tillgänglig på Svenska. Denna manual finns på Engelsk.
Behöver du hjälp?
Har du en fråga om Casio och finns inte svaret i manualen?
Fråga och svar
Antal frågor: 1Please help my watch shows only the time between 00:00 - 09:00. It never reach 11:00 or 12:00 pm. The real time is 12:15pm but the watch shows 02:00.