Casio Waveceptor WV200A-1AV

Casio Waveceptor WV200A-1AV bruksanvisning

(2)
  • Operation Guide 3140
    1
    MA0810-EA
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully.
    This watch does not have a time zone that corresponds to the UTC offset of
    3.5 hours. Because of this, the radio-controlled timekeeping and World Time
    functions will not display the correct time for Newfoundland, Canada.
    Caution!
    Your watch is shipped with its Auto Display feature (which continually changes the
    contents of the digital display) turned on. Calibration signal reception is disabled while
    Auto Display is turned on.
    Press any button to turn off Auto Display and return to the Timekeeping Mode.
    About This Manual
    Button operations are indicated using the letters shown
    in the illustration.
    Each section of this manual provides you with the
    information you need in order to perform operations in
    each mode. Further details and technical information
    can be found in the “Reference” section.
    General Guide
    Press
    C
    to change from mode to mode.
    In any mode (except when a setting screen is on the display), press
    B
    to illuminate
    the display.
    Timekeeping Mode World Time Mode Countdown
    Timer Mode
    Alarm ModeStopwatch Mode
    Press .
    Radio-controlled Atomic Timekeeping
    This watch receives a time calibration signal and updates
    its time setting accordingly.
    Supported time calibration signals: United States (Fort
    Collins), England (Anthorn).
    See the information under “Signal Reception
    Troubleshooting” if you experience problems with time
    calibration signal reception.
    Current Time Setting
    This watch adjusts its time setting automatically in
    accordance with a time calibration signal. You can also
    perform a manual procedure to set the time and date,
    when necessary.
    The fi rst thing you should do after purchasing this
    watch is to specify your Home City (the city where you
    normally will use the watch). For more information,
    see “To specify your Home City” .
    When using the watch outside the areas covered by the time signal transmitters, you
    will have to adjust the current time setting manually as required. See Timekeeping
    for more information about manual time settings.
    The U.S. time calibration signal can be picked up by the watch while in North
    America. The term North America in this manual refers to the area that consists of
    Canada, the continental United States, and Mexico.
    To specify your Home City
    1. In the Timekeeping Mode, hold down
    A
    until the city
    code starts to fl ash, which indicates the setting screen.
    2. Press
    D
    (east) and
    B
    (west) to select the city code you
    want to use as your Home City.
    Time calibration signal reception is supported when
    any one of the city codes shown in the table below is
    selected as your Home City.
    U.S. Signal U.K. Signal
    City
    Code
    City
    Name
    City
    Code
    City
    Name
    City
    Code
    City
    Name
    City
    Code
    City
    Name
    HNL Honolulu YWG Winnipeg LIS Lisbon ATH Athens
    ANC Anchorage CHI Chicago LON London MOW Moscow
    YVR Vancouver MIA Miami MAD Madrid
    LAX Los Angeles YTO Toronto PAR Paris
    YEA Edmonton NYC New York ROM Rome
    DEN Denver YHZ Halifax BER Berlin
    MEX Mexico City YYT St. Johns STO Stockholm
    3. Press
    A
    twice to exit the setting screen.
    Day of week
    Year
    Home Time
    (Hour : Minutes Seconds)
    Month Day
    PM indicator
    DST
    indicator
    Important!
    Normally, your watch should show the correct time as soon as you select your Home
    City code. If it does not, it should adjust automatically after the next auto receive
    operation (in the middle of the night). You can also perform manual receive or you
    can set the time manually.
    The watch will receive the time calibration signal automatically from the applicable
    transmitter (in the middle of the night) and update its settings accordingly. For
    information about the relationship between city codes and transmitters, see Home
    City Codes and Transmitters.
    Under factory default settings, auto receive is turned off for all of the following city
    codes: HNL (Honolulu), ANC (Anchorage), ATH (Athens), and MOW (Moscow). For
    details about turning on auto receive for these city codes, see To turn auto receive
    on and off.
    You can disable time signal reception, if you want. See To turn auto receive on and
    off for more information.
    See the maps under Approximate Reception Ranges for information about the
    reception ranges of the watch.
    If you are in an area that does not use Daylight Saving Time (summertime), turn off
    the DST setting.
    Time Calibration Signal Reception
    There are two different methods you can use to receive the time calibration signal:
    auto receive and manual receive.
    Auto Receive
    With auto receive, the watch receives the time calibration signal automatically up to
    six times a day. When any auto receive is successful, the remaining auto receive
    operations are not performed. For more information, see About Auto Receive.
    Manual Receive
    Manual receive lets you start a time calibration receive operation with the press of a
    button. For more information, see To perform manual receive.
    City code
Casio Waveceptor WV200A-1AV

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Casio Waveceptor WV200A-1AV? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Casio Waveceptor WV200A-1AV att svara på din fråga.

Se manualen för Casio Waveceptor WV200A-1AV helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 2 personer med ett genomsnitt på 6.1. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Casio Waveceptor WV200A-1AV? Ställ din fråga här

Casio Waveceptor WV200A-1AV – specifikationer

Varumärke Casio
Modell Waveceptor WV200A-1AV
Produkt Sportklocka
EAN 630219282814, 79767898281
Språk Engelsk
Filtyp PDF
Tekniska data
Vattentät
Vattentät upp till 200
Kalender
Klockläge 12 timmar/24 timmar
Stoppur
noggrannhet +/- 20
Världstidsfunktion
Typ av urtavla LCD-urtavla
Övrigt
Produktstorlek (BxDxH) 48.3 x 39 x 12.5
Produktens färg Svart
Vikt & dimension
Vikt 40
Design
bandmaterial Harts
Strömtillförsel
Batterityp CR1620

Relaterade produktmanualer

Sportklocka Casio

Vanliga frågor

Nedan hittar du de vanligaste frågorna om CasioWaveceptor WV200A-1AV .

Är din fråga inte listad? Ställ din fråga här

Bruksanvisni.ng

Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

Bruksanvisni.ng

© Copyright 2020 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer