Cateye Strada RD300 bruksanvisning

Cateye Strada RD300
(1)
  • Sidantal: 2
  • Filtyp: PDF
5
8
7
2
3
1
6
4
Tire circumferencereference table
12 x 1.75
14 x 1.50
14 x 1.75
16 x 1.50
16 x 1.75
18 x 1.50
18 x 1.75
20 x 1.75
20 x 1-3/8
22 x 1-3/8
22 x 1-1/2
24 x 1
24 x 3/4
Tubular
24 x 1-1/8
24 x 1-1/4
24 x 1.75
24 x 2.00
24 x 2.125
26 x 7/8
26 x 1
(
59
)
26 x 1
(
65
)
26 x 1.25
26 x 1-1/8
26 x 1-3/8
26 x 1-1/2
26 x 1.40
26 x 1.50
26 x 1.75
26 x 1.95
26 x 2.00
26 x 2.10
26 x 2.125
26 x 2.35
26 x 3.00
27 x 1
27 x 1-1/8
27 x 1-1/4
27 x 1-3/8
650 x 20C
650 x 23C
650 x 35A
650 x 38A
650 x 38B
700 x 18C
700 x 19C
700 x 20C
700 x 23C
700 x 25C
700 x 28C
700 x 30C
700 x 32C
700C Tubular
700 x 35C
700 x 38C
700 x 40C
29 x 2.1
29 x 2.3
935
1020
1055
1185
1195
1340
1350
1515
1615
1770
1785
1753
1785
1795
1905
1890
1925
1965
1920
1913
1952
1953
1970
2068
2100
2005
2010
2023
2050
2055
2068
2070
2083
2170
2145
2155
2161
2169
1938
1944
2090
2125
2105
2070
2080
2086
2096
2105
2136
2146
2155
2130
2168
2180
2200
2288
2326
Tire size L (mm)

CATEYE STRADA WIRELESS

CYCLOCOMPUTER CC-RD300W

U.S. Pat. Nos. 5236759/6957926 Pat./Design Pat. PendingCopyright© 2011 CATEYE Co., Ltd.CCRD3W-110930 066600542 6
L mm
SEN
SOR
ZONE
5
4
5 mm
5 mm
5 mm
S
EN
S
O
R
ZO
N
E
4
5
Install the sensor and magnetSensor zoneInside of right front fork
Max
70 cmYES! NO!
A
The distance between the computerand the sensor must not exceed thetransmission range of 70 cm. The backof the computer must face the sensor.
B
The magnetmust passthrough thesensor zone.
C
The clearancebetween thesensor surfaceand the magnetmust notexceed 5 mm.
5
SENSOR
ZONE
4
6
8
SENSOR
ZONE
3
4
1
2
Click
1
2
2
1
7
7
3
2
*
For wing type handlebar or oversized stem, bracket can be mounted using the Bracket Holder and nylon ties. (Option) Caution:Make sure that the back of the computer faces the sensor.* The computer may not function appropriately on somestem if its back does not face the sensor as shown in
A
.
When attaching the bracket to the stemSpokeToward thesensor zoneInstall the magnetWhile supporting it by hand,Handlebar
Cut
Attach the bracket to the stem or handlebarRemove/install thecomputerCaution:Round off the cut edgeof the bracket band toprevent injury.Install the sensorInside of right front fork* After installation, rotate the front wheel gently to check that the speed is displayed on thecomputer. If the speed is not displayed, check that conditions
A
,
B
, and
C
, above, havebeen done appropriately.
Stem
Pull
securely* Install the sensor as close to the upperpart of the front fork as possible.push it out as if lifting the front upWhen attaching the bracket to the handlebar
How to install the unit on your bicycle
1 Bracket band2 Bracket
3
Nut
4 Speed sensor5 Magnet6 Sensor rubber pad7 Bracket rubber pad8 Nylon ties (x2)
ENG
Before using the computer, please thoroughly read this manual and keep it forfuture reference. WARNING / CAUTION• Do not concentrate on the computer while riding. Ride safely!• Install the magnet, sensor, and bracket securely. Check these periodically.• If a child swallows a battery, consult a doctor immediately.• Do not leave the computer in direct sunlight for unnecessary or extended periods.• Do not disassemble the computer.• Do not drop the computer. Doing so may result in a computer malfunction or damage.
When using the computer installed on the bracket, change the MODE by pressing on the three dots
below the screen. Pressing hard on other areas can result in malfunction or damage to the computer.• Tighten the dial on the Flex-Tight bracket by hand only. Over-tightening can damage the bracketthreads.• When cleaning the computer, bracket and sensor, do not use thinners, benzene, or alcohol.• Dispose of used batteries according to local regulations.• LCD screen may be distorted when viewed through polarized sunglass lenses.Wireless SensorThe sensor was designed to receive signals within a maximum range of 70 cm, to reduce chance ofinterference.When adjusting the wireless sensor, note the following:• Signals cannot be received if the distance between the sensor and the computer is too great.• The transmission distance may be shorter due to low temperature or low battery.• Signals can be received only when the back of the computer is facing the sensor.Interference may occur, resulting in incorrect data, if the computer is:• Near a TV, PC, radio, motor, or in a car or train.• Close to a railroad crossing, railway tracks, TV stations and/or radar base.• Using with other wireless devices in close proximity.This device complies with Part 15 of the FCC Rules.Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interference,and (2)this devicemust accept any interference received,including interference that may cause undesiredoperation.Modifications The FCC requires the user to be notified that any changes or modificationsmade to this device that are not expressly approved by CatEye Co.,Ltd.May void the user’s authority to operate the equipment.
AC
MENU
MODE
MENUMENUMODEMODE
MENU
MENU
MENU
MODEMODE
MODE
MODE
MODE
MODE
MODE
MODE
MENUMENUMODEMODE
AC
1
2
3
4
km/h mphIncreaseMove digits(by pressing& holding)Register thesettingRegisterthe settingClear all data (initialization)Press the AC button on the back.Select the desired speed unitsSelect “ ” or “ ”.Enter the tire circumferenceEnter the tire circumference of your bicycle in mm.* Refer to the tire circumference reference table.Set the clockWhen MODE is pressed and held, “Displayedtime”, “Hour”, and “Minute” will appear, inthis order.24h 12h,or increasethe valueSwitch thescreen ormove digits(by pressing& holding)
Preparing the computer
Battery case coverPush!When the computer ismounted on the bracket : Speed unit : Wheel size icon: Sensor signal reception iconMeasure wheel circumference(L) of your bikeTo get the most accuratecalibration do a wheel roll out.With the valve stemperpendicular to the ground,mark the pavement at the valvestem. With the riders weight onthe bike, roll the wheel one tirerevolution in a straight line andmark the ground when thevalve stem is perpendicular tothe ground again. Measure thedistance in millimeters. This isthe most accurate wheelcalibration number.
Cateye Strada RD300

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Cateye Strada RD300? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Cateye Strada RD300 att svara på din fråga.

Se manualen för Cateye Strada RD300 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.7. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Cateye Strada RD300? Ställ din fråga här

Cateye Strada RD300 – specifikationer

Allmänt
Varumärke Cateye
Modell Strada RD300
Produkt Cykeldator
EAN 4990173017577, 4990173021000
Språk Engelsk
Filtyp PDF

Vanliga frågor

Nedan hittar du de vanligaste frågorna om Cateye Strada RD300 .

Är din fråga inte listad? Ställ din fråga här