Crestron HD-DA8-4KZ-E bruksanvisning

Här kan du se manualen för Crestron HD-DA8-4KZ-E gratis. Har du läst manualen utan att den ger svar på din fråga? Ställ då din fråga till andra ägare av Crestron HD-DA8-4KZ-E på denna sida.

HD-DA8-4KZ-E
1:8 HDMI
®
Distribution Amplifier w/4K60 4:4:4 & HDR Support
crestron.com
|
800.237.2041
> Splits one HDMI
®
source to eight outputs
> Handles 4K60 4:4:4 and HDR video signals
[1]
> Fully compatible with HD 1080p, UHD 4K, and
DCI 4K sources and displays
> Handles 3D video and Deep Color
> Handles Dolby
®
TrueHD, Dolby Atmos
®
, DTS HD
®
,
DTS:X
®
, and uncompressed 7.1 linear PCM audio
> Selectable handling of HDCP 2.2 or HDCP 1.4
> EDID management options
> Input and output video presence indication
> No programming or control system required
> Thin profile – less than one inch deep
> Surface, shelf, or single rack rail mountable
> External 100-240V universal power pack included
The Crestron
®
HD-DA8-4KZ-E is a simple to use, high-performance 4K
AV distribution amplifier designed to split a single HDMI
®
signal to feed
up to eight separate displays, switchers, and/or other devices. It provides
full support for UHD and DCI 4K60 4:4:4 and HDR video, HDCP 1.4 or 2.2
copy protection, and high-bitrate 7.1 audio, to ensure optimal performance
and compatibility for any HD or 4K video application. No programming or
control system is required for operation.
[1]
For smaller applications, refer to models
HD-DA2-4KZ-E and HD-DA4-4KZ-E.
SPECIFICATIONS
Video
Input Signal Type: HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support
[1]
(DVI & Dual-Mode DisplayPort compatible
[2]
)
Output Signal Type: HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4
support
[1]
(DVI compatible
[2]
)
Copy Protection: Selectable for HDCP 2.2, HDCP 1.4, or HDCP disabled
Maximum Resolutions:
Scan
Type
Resolution
Frame
Rate
Color
Sampling
Color
Depth
Progressive
4096x2160 DCI 4K
&
3840x2160 4K UHD
24 Hz 4:4:4 36 bit
30 Hz 4:4:4 36 bit
60 Hz 4:2:2 36 bit
60 Hz 4:4:4 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD1080p 60 Hz 4:4:4 36 bit
Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit
NOTE: Common resolutions are shown; other resolutions are supported at
pixel clock rates up to 600 MHz
Audio
Input Signal Type: HDMI (Dual-Mode DisplayPort compatible
[2]
)
Output Signal Type: HDMI
Formats: Dolby Digital
®
, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD,
Dolby Atmos, DTS
®
, DTS-ES, DTS 96/24, DTS HD High Res, DTS HD Master
Audio, DTS:X, LPCM up to 8 channels
Communications
USB: USB 2.0 host; supports firmware update and custom EDID upload
via a USB flash drive
HDMI: HDCP & EDID (does not pass CEC)
HDCP Version: Selectable for HDCP 2.2, 1.4, or OFF;
HDCP encrypted content is blanked in OFF mode
EDID Mode: Selectable for DEFAULT or COPY 1ST;
• The factory default EDID is 4K60 4:4:4 non-HDR video with
2-channel LPCM audio;
• The factory default EDID can be replaced with a custom EDID
via USB;
• Sliding the switch from DEFAULT to COPY 1ST copies and stores
the EDID from the device at OUTPUT 1 and passes it to the INPUT
source device;
• Sliding the switch from COPY 1ST to DEFAULT erases the stored
EDID and uses the factory default or custom EDID;
Note: Changing the device at OUTPUT 1 will not update the stored
EDID until the switch is moved to DEFAULT and back to COPY 1ST
Connectors
INPUT: (1) HDMI Type A connector, female;
HDMI digital video/audio input
[1]
;
(DVI & Dual-Mode DisplayPort compatible
[2]
)
OUTPUT 1 – 8: (8) HDMI Type A connectors, female;
HDMI digital video/audio outputs
[1]
;
(DVI compatible
[2]
)
SERVICE: (1) USB Type A connector, female;
USB 2.0 host port;
For firmware update and custom EDID upload via a USB flash drive

Har du en fråga om Crestron HD-DA8-4KZ-E?

Ställ frågan du har om Crestron HD-DA8-4KZ-E till andra produktägare. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju bättre problemet och frågan beskrivs, desto enklare är det för andra CrestronHD-DA8-4KZ-E-ägare att ge dig ett bra svar.