CyberPower CyberShield CS24C12V2-E

CyberPower CyberShield CS24C12V2-E bruksanvisning

(1)
  • User’s Manual for
    CyberShield
    CS24C12V2-E
    CyberShield Battery Backup Power Supplies are designed to provide a
    local power solution for cable telephony, wireless local loop (WLL), and
    fiber to the home (FTTH) broadband equipment.
    IMPORTANT SAFETY WARNINGS
    (SAVE THESE INSTRUCTIONS)
    This manual contains important instructions regarding the installation and operation of this device.
    Read this manual thoroughly before attempting to unpack , install or operate this device
    CAUTION! The battery can energize hazardous live parts inside even when the AC input power is
    disconnected.
    CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service the
    battery. No user serviceable parts inside, except for the battery.
    CAUTION! To avoid electric shock, turn off the unit and unplug it from the AC power source before
    servicing the battery or installing a computer component.
    ENCLOSURE INSTALLATION
    Carefully follow these instructions during installation of this device:
    1.) Carry out the installation in a safe area that is free of excessive dust and has adequate airflow.
    2.) Screws must be appropriate for total weight of the Battery Backup Power Supply and the
    mounting surface material.
    3.) Do not operate the Battery Backup Power Supply where the temperature and humidity are
    outside the specified limits. (Refer to specifications in this manual.)
    BATTERY REPLACEMENT
    This battery is hot-swappable. As long as utility power is on , you may leave the Battery Backup
    Power Supply and connected equipment on while replacing a new battery.
    Once the battery is disconnected, the connected equipment is not protected from power
    outages.
    Deliver spent batteries to a recycling facility or ship to the manufacturer in the
    replacement battery packing material.
    WARNING INDICATOR
    OPERATION
    Connect: Equipment and Power
    Step1. Plug the Battery Backup Power Supply power cord into the utility power cord inlet
    Step2. Plug the Battery Backup Power Supply power cord into the wall outlet.
    The Battery Backup Power Supply battery charges when it is connected to utility power.
    The battery charges fully during the first 24 hours of normal operation. Do not expect
    full battery run capability during this initial charge period.
    COLD START
    The cold start feature is for applying power to the Battery Backup Power Supply and connected
    equipment when the Battery Backup Power Supply is off and there is no utility power. Before using
    the cold start feature, please make sure the battery is charged. To enable the cold start feature,
    press the recessed cold start button with a small pointed object.
    Battery Backup Power Supply is on utility power.
    Battery Backup Power Supply is on battery power.
    DC output power is provided by the battery or
    utility power.
    The battery is not connected or the battery needs to be
    replaced.
    Green
    Yellow
    Green
    Red
    Indicator Color Condition
    Step 1:
    a. Remove the case screw.
    b. Open the battery cover.
    Step 2:
    a. Unstrap strap from battery.
    b. Slide battery off of the
    shelf.
    c. Disconnect battery cable
    connector at the chassis end.
    Step 3:
    a. Use the enclosed installation template to
    mark an installation location for the unit.
    b. Mount the unit on the wall with 3 mounting
    screws into the keyhole slots.
    c. Tighten the screws to secure the units.
    d. Connect the battery connector and replace
    the battery back.
    Step 1:
    a. Remove the case screw.
    b. Open the battery cover.
    Step 2:
    a. Loosen the battery strap.
    b. Disconnect battery cable connector
    to remove battery.
    c. Replace with new battery and
    re-connect the battery connector.
    Step 3:
    a. Tighten the battery strip
    b. Close the battery cover and
    lock the case screw.
    Front Panel
    CS24C12V2-E
    INTELLIGENT BACK-UP POWER
    INTELLIGENT BACK-UP POWER
    TM
    TM
    AC
    OUTPUT
    BATTERY
    Installation Suggestion:
    To prevent the unit from intrusion of foreign matter, we suggest that the unit should be mounted on
    a piece of wood which should then be attached to a wall underneath eaves.
    Power Cable Selection:
    A power cable (4.5m max.) being identified as 18AWG, "OUTDOOR" or "WATERPROOF"
    should be selected while necessary.
CyberPower CyberShield CS24C12V2-E

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om CyberPower CyberShield CS24C12V2-E? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av CyberPower CyberShield CS24C12V2-E att svara på din fråga.

Se manualen för CyberPower CyberShield CS24C12V2-E helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 5.1. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om CyberPower CyberShield CS24C12V2-E? Ställ din fråga här

CyberPower CyberShield CS24C12V2-E – specifikationer

Allmänt
Varumärke CyberPower
Modell CyberShield CS24C12V2-E
Produkt Avbrottsfri strömförsörjning (UPS)
EAN 649532123148, 6495321231488
Språk Engelsk
Filtyp PDF
Design
Produktens färg Vit
Kabellängd 3
Formfaktor -
LED-indikatorer Batteribyte
RoHS-efterlevnad
Vikt & dimension
Bredd 273.05
Höjd 203.2
Vikt 3492.66
Djup 95.25
Egenskaper
Uteffekt kapacitet (VA) -
Uteffekt 24
Effektivitet 76
Ingångsfrekvens 50/60
Hörbara alarmlägen Batteribyte
Övrigt
Ingångsspänning (Volt) -
Förpackningsstorlek (B x D x H) 355.6 x 120.65 x 355.6
Utspänning (Volt) 87-264
Anslutningar
Antal uttag AC -AC-utgångar
AC försäljningsställen -
Batteri
Batteriteknik Slutna blybatterier (VRLA)
Laddningstid 18
Hot-swap batteri
Kallstart
Miljökrav
Temperatur vid drift 0 - 40
Temperaturintervall (förvaring) -15 - 45
Intervall för relativ operativ luftfuktighet 0 - 95
Altitud vid drift 0 - 3000
Höjd över havet i avstängt läge 0 - 15000
Förpackning
Vikt inkl. förpackning 4535.9

Bruksanvisni.ng

Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

Bruksanvisni.ng

© Copyright 2020 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer