CyberPower PR1000LCDRT2U

CyberPower PR1000LCDRT2U bruksanvisning

(1)
  • The LCD display indicates a
    variety of UPS operational
    conditions. All descriptions
    apply when the UPS is plugged
    into the AC outlet and turned on
    or when the UPS is on battery.
    Smart App Sinewave Series
    PR1000LCDRT2U/PR1000LCDRTXL2U
    PR1500LCDRT2U/PR2200LCDRT2U
    Users Manual
    K01-0000057-04
    This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries. Please read
    and follow all instructions carefully during installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install,
    or operate.
    CAUTION! The UPS must be connected to a grounded AC power outlet with fuse or circuit breaker protection. DO NOT plug the UPS into an
    outlet that is not grounded. If you need to de-energize this equipment, turn off and unplug the UPS.
    CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower
    Systems does not sell products for life support or
    medical applications. DO NOT use in any circumstance that would affect operation or safety of any life support equipment, with any medical
    applications, or patient care.
    CAUTION! The battery can energize hazardous live parts inside even when the AC input power is disconnected.
    CAUTION! For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
    CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area, free of conductive
    contaminants. (Please see specifications for acceptable temperature and humidity range).
    CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service the battery. There are no serviceable parts inside,
    except for the battery.
    CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC power source before servicing the battery or installing a
    computer component.
    CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not use with or near aquariums. Condensation from
    the aquarium can come in contact with metal electrical contacts and cause the machine to short out.
    CAUTION! DO NOT USE WITH LASER PRINTERS! The power demands of laser printers are too large for a UPS.
    UNPACKING
    Inspect the UPS upon receipt. The box should contain the following.
    (1) UPS Unit; (1) User's Manual for UPS; (2) Rack mount Brackets; (2) Stands; (2) Skids; (1) Telephone Cable (black); (1) Emergency Power Off
    Cable (gray); (1) PowerPanel
    ®
    Business Edition Software CD; (2) Serial Interface Cable (DB-9); (1) USB A+B type cable; (1) Warranty
    Registration Card.
    OVERVIEW
    The PR1000LCDRT2U/PR1000LCDRTXL2U/PR1500LCDRT2U/PR2200LCDRT2U provides automatic
    voltage regulation for inconsistent utility power. The PR1000LCDRTXL2U features 2060 Joules, and
    PR1000LCDRT2U / PR1500LCDRT2U/PR2200LCDRT2U features 1874 Joules of surge protection, and
    provides battery backup during power outages. The PR1000LCDRT2U/PR1000LCDRTXL2U/
    PR1500LCDRT2U/PR2200LCDRT2U ensures consistent power to your computer system and its included
    software will automatically save your open files and shutdown your computer system during a utility power
    loss.
    .
    AUTOMATIC VOLTAGE REGULATOR(AVR)
    The PR1000LCDRT2U/PR1000LCDRTXL2U/PR1500LCDRT2U/PR2200LCDRT2U stabilizes inconsistent utility power. The incoming utility
    power may be damaging to important data and hardware, but with Automatic Voltage Regulation, the computer will not experience damaging
    voltage levels. An Automatic Voltage Regulator automatically increases low or decreases high voltage to a consistent, computer safe 110v/120v.
    The unit powerful sealed lead-acid batteries will provide power only if the incoming voltage drops below 80v or increases above 150v.
    SYSTEM BLOCK DIAGRAM
    HARDWARE INSTALLATION GUIDE
    1. Your new UPS may be used immediately upon receipt. However, recharging the battery for at least four hours
    is recommended to ensure that the battery's maximum charge capacity is achieved. Charge loss may occur
    during shipping and storage. To recharge the battery, simply leave the unit plugged into an AC outlet. The unit
    will charge in both the on and off position.
    2. If you plan to use the included software, connect either the serial cable or the USB cable to the corresponding
    port on the UPS and the computer. Note: if the USB port is used the serial port will be disabled. To control
    multiple computers install PowerPanel
    ®
    Business Edition Agent on the computer connected with the USB cable
    and PowerPanel
    ®
    Business Edition Slave on the remaining computers.
    3. With the UPS unit off and unplugged, connect your computer, monitor, and any externally powered data
    storage device (Hard drive, Tape drive, etc.) into the battery power supplied outlets. DO NOT plug a laser
    printer, copier, space heater, vacuum, paper shredder or other large electrical device into the UPS. The power
    demands of these devices will overload and possibly damage the unit.
    4. To protect a fax, telephone, modem line or network cable, connect a telephone cable or network cable from
    the wall jack outlet to the IN jack of the UPS. Then connect a telephone cable or network cable from the OUT
    jack on the UPS to the modem, computer, telephone, fax machine, or network device.
    5. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall branch outlet is
    protected by a fuse or circuit breaker and does not service equipment with large electrical demands (e.g. air
    conditioner, refrigerator, copier, etc.). Avoid using extension cords.
    6. Depress the power switch to turn the unit on. The Power On indicator light will illuminate. If an overload is
    detected, an audible alarm will sound and the unit will emit one long beep. To correct this, turn the UPS off and
    unplug at least one piece of equipment from the battery power supplied outlets. Wait 10 seconds. Make sure the
    circuit breaker is depressed and then turn the UPS on.
    7. Your UPS is equipped with an auto-charge feature. When the UPS is plugged into an AC outlet, the battery will
    automatically recharge.
    8. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.
    9. To store your UPS for an extended period, cover it and store with the battery fully charged. Recharge the
    battery every three months to ensure battery life.
    10. Professional Rack Mount UPS provide one serial port, one dry contact port, and one USB port to allow
    communication between the UPS and computers or equipment. The dry contact port (Serial Port II) signals
    information for equipment that can utilize a dry contact UPS. The primary computer, with PowerPanel
    ®
    Business
    Edition installed, connected to Serial Port I or the USB port is the computer that you use to control the UPS.
    When there is a power failure, the primary computer which connects to Serial Port I or the USB port will start to
    shutdown after a user controlled delay. PowerPanel
    ®
    Business Edition Agent software will save and close any
    open files prior to shutting the system down and signal any configured slaves to shutdown.
    11. EPO (Emergency Power Off) Port:
    The feature is used with EPO controllers. Use the provided gray cable to connect to an EPO contact switch.
    Follow the appropriate circuit diagram below to wire the cable to match your EPO configuration. EPO remote
    switch which is a Push-Back button installed computer room outside by a phone line, and not connected any
    other equipment.
    FRONT / REAR PANEL DESCRIPTION
    1. Power Switch
    Master on/off switch for equipment connected to the UPS.
    2. Power On Indicator
    Indicates the power is on.
    3. LCD Module Display
    LCD shows all the UPS information with icons and messages.
    4. LCD Display Toggle Button
    The button can be used to toggle between different data displays
    on the LCD.
    5. Battery Backup Protected Outlets
    Provides eight battery powered, surge protected and AVR outlets
    for connected equipment and ensures temporary uninterrupted
    operation of connected equipment during a power failure.
    Critical /Non-critical
    When the UPS is overloaded, the circuit breakers will be tripped
    to interrupt the power supply to the uncritical outlets while
    continuing to supply the critical outlets. As well, as the battery
    capacity depletes under the threshold value, the uncritical outlets
    will be shut down and provide energy for critical outlets. The
    threshold can be determined and set by users. Non-critical
    outlets can also be turned on/off manually through the software
    package provided.
    6. Input Power Cord
    Heavy-duty, extra long power cord.
    7. Output Circuit Breaker
    Resettable circuit breakers provide output outlets protection from
    overload.
    8. Input Circuit Breaker
    Resettable circuit breakers provide Input optimal overload
    Protection.
    9. USB port.
    USB communication port for management software.
    Contact your dealer or call the number in this manual for information on battery replacement. The part numbers of internal battery are RBP832 for
    PR1000LCDRT2U/PR1000LCDRTXL2U/PR1500LCDRT2U, RBP842 for PR2200LCDRT2U. For external battery pack of PR1000LCDRTX2U,
    the part number is BP48V45ART2U.
    Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery. Service the battery under the supervision of
    personnel knowledgeable of batteries and their precautions. Servicing the battery can only be performed by trained personnel.
    Replacement of batteries located in an OPERATOR ACCESS AREA.
    CAUTION! When replacing batteries, replace with the same number of the following battery: BP7-12(BB) for PR1000LCDRT2U/
    PR1500LCDRT2U/ PR1000LCDRTXL2U, HR9-12(BB) for PR2200LCDRT2U
    CAUTION! Risk of Energy Hazard, 12 V, maximum 7 Ampere-hour(BP7-12) or 9 Ampere-hour battery(HR9-12). Before replacing batteries,
    remove conductive jewelry such as chains, wrist watches, and rings. High energy through conductive materials could cause severe burns.
    CAUTION! Risk of battery explosion, if battery is replaced by an incorrect type. Dispose of used battery according to the instructions.
    CAUTION! To reduce the risk of fire, connect only to a circuit provided with 20 amperes maximum branch circuit overcurrent protection in
    accordance with the National Electric Code, ANSI/NFPA 70.
    CAUTION! For model PR1000LCDRTXL2U can be provided with a maximum of four extension battery packs.
    CAUTION! Use only the specified type of battery. See your dealer for replacement batteries.
    CAUTION! The battery may present the risk of electrical shock. Do not dispose of batteries in a fire, as they may explode. Follow all local
    ordinances regarding proper disposal of batteries.
    CAUTION! Do not open or mutilate the batteries. Release electrolyte is harmful to the skin and eyes and may be toxic.
    CAUTION! A battery can present a high risk of short circuit current and electrical shock.
    Take the following precautions before replacing the battery:
    1. Remove all watches, rings or other metal objects.
    2. Only use tools with insulated handles.
    3. Do not lay tools or metal parts on top of battery or any terminals.
    4. Wear rubber gloves and boots.
    5. Determine if the battery is inadvertently grounded. If inadvertently grounded, remove source of ground. CONTACT WITH A GROUNDED
    BATTERY CAN RESULT IN ELECTRICAL SHOCK! The likelihood of such shock will be reduced if such grounds are removed during installation
    and maintenance (applicable to a UPS and a remote battery supply not having a grounded circuit)
    BATTERY REPLACMENT PROCEDURE:
    .
    INPUT voltage meter: INPUT voltage meter: This meter measures the AC voltage that the UPS system is receiving from the utility wall
    outlet. The INPUT voltage readout can be used as a diagnostic tool to identify poor-quality input power.
    The AVR in this UPS continuously conditions the power to a stable 110/120V output to connected
    equipment. In the event of a complete power loss, severe brownout, or over voltage, the UPS relies on its
    internal battery back up to supply a consistent 110/120V output.
    OUTPUT voltage meter: This meter measures, in real time, the AC voltage that the UPS system is
    providing to the computer, such as normal line mode, AVR mode and battery back up mode.
    Note: The OUTPUT voltage readout displays the status of the battery back up outlets.
    ESTIMATE RUN TIME: This displays the run time estimate of the UPS with the current battery capacity
    and load.
    NORMAL icon: This icon appears when the UPS is working under normal conditions.
    BATTERY icon: During a severe brownout or blackout, this icon appears and an alarm sounds (two short
    beeps followed by a pause) to indicate the UPS is operating from its Internal batteries. During an extended
    brownout or blackout that drains the battery, a continuous alarm will sound (and the BATT. CAPACITY
    readout will show a single shaded segment, equaling 20% battery capacity remaining) indicating the UPS
    batteries are nearly out of power. If this occurs, it is recommended that you save your files and manually
    power down your equipment immediately.
    Automatic Voltage Regulation (AVR) icon: This icon appears whenever your UPS is automatically
    correcting low AC input line voltage without using battery power. This is a normal, automatic operation of your UPS, and no action is required.
    SILENT MODE icon: This icon appears whenever the UPS is in silent mode. The buzzer does not beep during silent mode until the battery
    reaches low capacity.
    OVER LOAD icon: This icon appears and an alarm sounds to indicate the battery-supplied outlets are overloaded. To clear the overload, unplug
    some of your equipment from the battery-supplied outlets until the icon turns off and the alarm stops.
    FAULT icon: This icon appears if there is a problem with your UPS.
    BATT. CAPACITY meter: This meter displays the approximate charge level (in 20% increments) of the UPS's internal battery. During a blackout
    or severe brownout the UPS switches to battery back up power the BATT. CAPACITY icon appears and the charge level decreases.
    LOAD CAPACITY: This meter displays the approximate output load level (in 20% increments) of the UPS’s battery outlets.
    IMPORTANT SAFETY WARNINGS
    INSTALLING YOUR UPS SYSTEM
    1. Remove the right side front panel
    2. Remove the two retaining screws of
    the cable protection cover then remove
    the cover
    3. Remove the two retaining screws of the cable
    connectors.
    4. Disconnect the black and red cable 5. Remove the three retaining screws. 6. Pull out the old battery pack and replace.
    Reassemble the retaining screws, covers, black and
    red cable, and front panel in the reverse sequence
    of the above steps. Recharge the unit for 4-8 hours
    to ensure maximum UPS battery runtime.
    LCD STATUS DEFINITION
    BATTERY REPLACEMENT
    10. Protected Communication Ports RJ11/RJ45
    Ports protect standard single line modem, fax, telephone line or network
    cable.
    11. Site Wire Fault Indicator
    This LED will illuminate to warn the user that a wiring problem exists within
    the AC receptacle, such as a bad ground or reversed wiring. If illuminated,
    disconnect all equipment and contact an electrician to ensure outlet is
    properly wired.
    12. Coax/Cable/DSS Surge Protection
    The Coax/Cable/DSS surge protection ports will protect any cable Modem,
    CATV converter or DSS receiver.
    13. Serial Port I
    Serial port allows connection and communication between the UPS and the
    computer.
    14. Serial Port II
    Serial Port II relays information to equipment that can utilize a contact
    closure UPS.
    15. SNMP/HTTP Network slot
    Remove the cover panel to install optional RMCARD that allows remote
    monitoring and control of your UPS on a network
    *Dry connect is controlled by the PowerPanel
    ®
    Software,
    please go to www.cyberpowersystems.com
    for free download.
    *NOTE: Both USB and Serial can not be used simultaneously.
    BASIC OPERATION
    When you first receive the
    unit, plug in the unit to fully
    charge the battery.
    Unplug the unit and turn Power
    Off when first connecting your
    computer and peripherals.
CyberPower PR1000LCDRT2U

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om CyberPower PR1000LCDRT2U? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av CyberPower PR1000LCDRT2U att svara på din fråga.

Se manualen för CyberPower PR1000LCDRT2U helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 5.9. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om CyberPower PR1000LCDRT2U? Ställ din fråga här

CyberPower PR1000LCDRT2U – specifikationer

Allmänt
Varumärke CyberPower
Modell PR1000LCDRT2U
Produkt Avbrottsfri strömförsörjning (UPS)
EAN 649532210039, 6495322100394, 96122009250
Språk Engelsk
Filtyp PDF
Egenskaper
Uteffekt kapacitet (VA) 1000
Uteffekt 700
Energivärdering 1780
Ingångsfrekvens 50/60
Svarstid (medel) 4
Hörbart larm
UPS-topologi Line-interactive
EMI / RFI-brusfiltrering
Övrigt
Anslutningsdetaljer utgång NEMA 5-15R
Anslutningsdetaljer ingång NEMA 5-15P
Produktstorlek (BxDxH) 438.15 x 400 x 89
Vikt (imperial) 52
Omgivningstemperatur vid drift 32 - 95
Dimension (B x D x H) (imperial) 17.25 x 15.75 x 3.5
Batteri
Hot-swap batteri
Normal drifttid vid halv belastning 32
Normal drifttid vid full belastning 11
Laddningstid 8
Utbytbara batteripatroner BB - BP7-12
Anslutningar
Seriella portar 1
Modem (RJ-11) portar 1
Antal LAN (RJ-45) anslutningar 1
Vikt & dimension
Vikt 23586
Miljökrav
Temperatur vid drift 0 - 40
Intervall för relativ operativ luftfuktighet 0 - 95
Temperaturintervall (förvaring) -15 - 45
Design
Certifiering UL1778, cUL 107.1, FCC DOC Class B

Bruksanvisni.ng

Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

Bruksanvisni.ng

© Copyright 2020 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer