• Raise or lower video projectors weighing up to 300 pounds with a push of a button.
• Heavy-duty, all metal construction with rack and pinion, chain drive lift mechanism for quiet operation.
• Bottom of lift is adjustable for flush installation and can be finished to match ceiling.
• Complete with three position control switch with cover plate.
• Optional plenum kit available where needed. Plenum covers meet plenum building codes for Da-Lite’s complete line of
concealed projector lifts.
SUGGESTED SPECIFICATIONS:
_______________________________ Video Projector Lift, Model ___________________ Da-Lift 15, 19 or 19L,
electrically operated 120 V (60 Hz) not more than 2.2 amp. for projectors weighing up to 300 pounds. Da-Lift 10M and
15M electrically operated 120 V (60 Hz) not more than 1.5 amp. for projectors weighing up to 40 pounds. To have rack
and pinion, with chain drive lift mechanism. Shall have specially designed motor, to be three wire with ground, quick
reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to
prevent coasting. To have preset but adjustable limit switch to automatically stop lift in the “down” position. When raised,
the lift will engage a micro switch that will cut power to the motor. Frame to be black welded steel with two electrical outlets furnished on the platform, for ceiling recessed
installation. Bottom of projector lift to be adjustable to allow flush installation with surrounding surface. Removable tray is attached to bottom frame assembly to allow for
ceiling tile attachment (by others). To be complete with three position control switch with cover plate. Optional low voltage, radio frequency or infrared, remotes available.
Optional plenum kit available where required by code. To be listed by Underwriters’ Laboratories.
• Front to back, left to right, vertical, and tilt projector adjustments.
• Signal cable and power cord management options.
• Electrical knockouts provided.
• Internally mounted wall switch for installer operation.
SUGGESTED SPECIFICATIONS:
Da-Lite/Advance Video Projector lift model Da-Lift ________ 26PL/33PL shall be mounted where indicated on plans. The lift shall operate on 120V AC power and not draw
more than 5.0 amps. The mount shall be a fabricated mild steel design and consist of a 14-gauge welded support frame, 14-gauge welded tilting frame, 18-gauge ceiling
tile holder and 18-gauge ceiling tile trim piece. Product shall have a prewired 120V AC grounded duplex receptacle and a prewired built-in switch for installer operation.
Product shall have a commercial powder coat white finish.
• Includes two outlet boxes, prewired duplex female receptacle, and duplex plate.
• All internal wiring is complete.
• Designed to mount in suspended ceiling or drywall ceiling.
• Infrared or radio frequency remote operation available.
• Unit has white powder coat finish.
Model Load Cap. Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F
Se manualen för Da-Lite Da-Lift Pivot 26P helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.3. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Da-Lite Da-Lift Pivot 26P? Ställ din fråga här
Behöver du hjälp?
Har du en fråga om Da-Lite som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Da-Lite -ägare att ge dig ett bra svar.
Behöver du hjälp?
Har du en fråga om Da-Lite som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Da-Lite -ägare att ge dig ett bra svar.
Antal frågor: 0