Quick Star t Guide
on the Wi-Fi camera, the LCD will display the following status
Video r ecording mode (default)
Wi-Fi icon (display when enable d)
Micro SD card icon (display when load ed)
camera mode, HI stands for 8 Mega Pixels (int erpolated)
), a nd in video r ecording mode, it stands for FHD
camera mode, LO stands for 5 Mega Pixels ( 2592x1920 ), and in
recordin g mode, it stan ds for 720 P (1280x720, 30fps);
only displays in video recording mode, standin g for 720P
Mute mode, displa ys when enabled, and disabled by def ault.
Counter, displays up to 999.
Timer , displays hours and minutes.
Battery icon: curren t batter y level of the cam era.
T he above icons may vary according to the status of the
you use th e camer a for the first tim e, please:
a micro SD or micro SDHC card (not included), as sho wn in
Class 10 Micro SD Card is requir ed for this camer a.
urn off the came ra before inserti ng or r emoving the card.
Turn on: press and hold th e button for about 3 seco nds, LCD
“ON ” and a beep can be heard from buzze r.
off: press and hold the button for about 3 seco nds, LCD
“OFF ” and a beep can be heard from buzzer.
setting : A fter turn on the DV, the default setting is as
DV is in vide o recording mode.
for 0 hour and 00 m inute.
when a Micr o SD card is
otherwise no display.
DV is in Mute mode, no Beep will
heard when pre ssing the butt ons. It
only whe n Mu te m ode is
when activate d.
modes . The DV provides different shoo ting modes.
the button repeatedly, the following first two modes
sho w on the DV screen , and other models display on the APP
stands for FHD (1920 x1080,30 fps)
stands for 720P (1280x720 ,30 fps)
stands for 720P (1280 x720,60
stands for 8M (3264 x 2448)
stan ds for 5M (2592 x 1920)
DV supports taking 3 photos
(only via App)
self-tim er mode , you can set 0s, 2s
W ith maximum 29 m inutes vide o recording per seq uence)
o record a video, please check whether the DV is under Video
If the icon is not displayed on the screen, pre ss
button repeated ly until it appears.
recording: Press and release the button, the
and [:] displayed in LCD will flash . At the sam e time the
indicator will flash too, m eaning the recording i s in proces s.
recording : Press and release the button, the
and [:] displayed in LCD wil l stop flashing. At the same
the red indicator will stop flashing either, meaning the
is s topped.
i switch and status indicator (red)
signal reception light