The battery is supplied with a partial charge. Please charge it completely before use.
¤Charge the handset in the base for 8.5 hours.
Please note
The handset must only be placed in the designated base or charger.
¤ Insert the batteries
with the polarity in
the right direction
(for correct +/-
direction, see
diagram).
¤ First insert the battery
cover on the top 1.
¤ Then press the cover
2 until it clicks into
place.
To open the battery cover,
for example to change the
batteries:
¤ Grip the notch on the
cover 3 and slide it
downwards 4.
1
3
4
2
C430A-C530A
C430-C530
8.5 h8.5 h
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and so
that you can use the alarm.
Date/Time
Date:
14.10.2013
Time:
07:15
BackSave
CallsTime
¤Press the key Time below the display screen to
open the input field.
(If you have already set the date/time, open the
input field via the menu:
v
¤Ï¤OK¤Date/Time¤OK)
The submenu Date/Time is shown on the display.
¤ The active input position flashes.
Enter the day, month and year as an
8-digit number via the keypad,
e.g.4Q2Q3
for 14.10.2013.
Press the right or left control key to
change the input position, e.g. to
correct an entry.
¤Press the down control key to switch to the
time input field.
¤ Enter the hours and minutes in 4-digit format
via the keypad e.g., QM5 for
07:15 am.
Change the input position with the control key
if necessary.
¤Press the key Save below the display screen to
save the entry.
Date/Time
Date:
15.01.2013
Time:
00:00
BackSave
Handset registration
Handsets contained in the package have already been registered to the base.
If, however, a handset has not been registered (display "Please register handset" or "Place
handset in base"), you must register it to the base.
if your handset is flashing the text "No Base" then it can be that:
uYour base station is not switched on, please check if the power supply is connected
properly.
uThere is too much distance between the handset and the base.
If the handset has not been pre-registered or you want to register an additional handset
to your base station, use the registration procedure below.
uAutomatically registering the Gigaset C430-C530
handset to base station:
¤ Place the handset in the base.
If automatic registration does not work, the handset
will have to be registered manually.
uManually registering the handset:
¤On the base: Press and hold (min. 3 seconds) the
Registration/paging key 1.
¤ On the C430-C530 handset, press the display key
Register.
Or:
v
¤Ï¤OK¤q Registration¤OK
¤Register Handset ¤OK
Display shows: Searching for a base in registration mode.
The connection to the base will be established; this may
take some time.
¤Enter the system PIN if required (factory setting: 0000)
¤ OK
You can register up to six handsets to your base. You can
also register other Gigaset handsets and handsets from
other devices with GAP functionality.
Dial Tone
The dial tone will only be heard when pressing the call button c for 2 seconds. A short press
will open the redial list.
C430A-C530A
C430-C530
1
1
Message lists
Any messages you receive are saved in the message lists. An
advisory tone sounds as soon as a new entry appears on a list.
The Message key also flashes. Icons for message types and the
number of new messages are shown on the idle display.
New messages available:
uÃOn the answer machine (only C430A-C530A)/
network mailbox
u™In the missed calls list
u In the missed alarms list
Open the message list by pressing the Message key f.
Answer machine
Activating/deactivating the answer machine
v
¤Ì¤OK¤qActivation (μ= activated) ¤Change
¤Activation:r On / Off
If activated:
¤ Mode:
r Answer & record / Answer only / Alternating
–Answer & record: The caller can leave a message;
–Answer only: The caller only hears an announcement
and cannot leave a message;
–Alternating:
If activated, Record from:s / Record until: Enter the
length of time in which messages are recorded.
¤ Save
iÃ
V
07:15
INT 114 Oct
Ã
™
021008
CallsCalendar
Example
Answer Machine
Activation:
On
Mode:
<Alternating>
Record from:
08:00
x
BackSave
Example
Congratulations
By purchasing a Gigaset, you have chosen a brand that is
fully committed to sustainability.
This product’s packaging is eco-friendly!
To learn more, visit www.gigaset.com.
C430-C430A
C530-C530A
Quick Start GuideGIGASET HELPLINE: 084503 18190
Anvisning
Se manualen för Gigaset C530A Duo helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 5 personer med ett genomsnitt på 8.4. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Gigaset C530A Duo? Ställ din fråga här
Har du en fråga om Gigaset som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Samsung Galaxy A7-ägare att ge dig ett bra svar.
Antal frågor: 0
Gigaset C530A Duo – specifikationer
Nedan hittar du produkt- och manualspecifikationerna för Gigaset C530A Duo.
Behöver du hjälp?
Har du en fråga om Gigaset som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Samsung Galaxy A7-ägare att ge dig ett bra svar.
Antal frågor: 0