Hitachi P50T501A

Hitachi P50T501A bruksanvisning

(1)
  • Important Safety Instructions
    SAFETY POINTS YOU SHOULD KNOW ABOUT
    YOUR HITACHI PLASMA TELEVISION
    Our reputation has been built on the quality,
    performance, and ease of service of HITACHI plasma
    televisions.
    Safety is also foremost in our minds in the design of
    these units. To help you operate these products
    properly, this section illustrates safety tips which will be
    of benefit to you. Please read it carefully and apply the
    knowledge you obtain from it to the proper operation of
    your HITACHI plasma television.
    Please fill out your warranty card and mail it to
    HITACHI. This will enable HITACHI to notify you
    promptly in the improbable event that a safety problem
    should be discovered in your product model.
    Follow all warnings and instructions marked on
    this plasma television.
    The lightning flash with arrowhead symbol,
    within an equilateral triangle, is intended
    to alert the user to the presence of
    uninsulated “dangerous voltage” within the
    product’s enclosure that may be of a sufficient
    magnitude to constitute a risk of electric shock to a
    person.
    The exclamation point within an equilateral
    triangle, is intended to alert the user to the
    presence of important operating and
    maintenance (servicing) instructions in the
    literature accompanying the appliance.
    READ BEFORE OPERATING EQUIPMENT
    Follow all warnings and instructions marked on this
    plasma television.
    1. Read these instructions.
    2. Keep these instructions.
    3. Heed all warnings.
    4. Follow all instructions.
    5. Do not use this apparatus near water.
    6. Clean only with a dry cloth.
    7. Do not block any ventilation openings. Install in
    accordance with the manufacturer’s instructions.
    8. Do not install near any heat sources such as
    radiators, heat registers, stoves, or other apparatus
    (including amplifiers) that produce heat.
    9. Do not defeat the safety purpose of the polarized or
    grounding-type plug. A polarized plug has two
    blades with one wider than the other. A grounding
    type plug has two blades and a third grounding
    prong. The wide blade or the third prong are
    provided for your safety. If the provided plug does
    not fit into your outlet, consult an electrician for
    replacement of the obsolete outlet.
    10. Protect the power cord from being walked on or
    pinched particularly at plugs, convenience
    receptacles, and the point where they exit from the
    apparatus.
    11. Only use the attachments/accessories specified by
    the manufacturer.
    12. Use only with the cart, stand, tripod,
    bracket, or table specified by the
    manufacturer, or sold with the
    apparatus. When a cart is used, use
    caution when moving the cart/apparatus
    combination to avoid injury from tip-over.
    13.
    Unplug this apparatus during lightning storms or
    when unused for long periods of time.
    14. Refer all servicing to qualified service personnel.
    Servicing is required when the apparatus has been
    damaged in any way, such as power-supply cord or
    plug is damaged, liquid has been spilled or objects
    have fallen into apparatus, the apparatus has been
    exposed to rain or moisture, does not operate
    normally, or has been dropped.
    15.Televisions are designed to comply with the
    recommended safety standards for tilt and stability.
    Do not apply excessive pulling force to the front, or
    top, of the cabinet which could cause the product
    to overturn resulting in product damage and/or
    personal injury.
    16.Follow instructions for wall, shelf or ceiling
    mounting as recommended by the manufacturer.
    17. An outdoor antenna should not be located in the
    vicinity of overhead power lines or other electrical
    circuits.
    18. If an outside antenna is connected to the receiver
    be sure the antenna system is grounded so as to
    provide some protection against voltage surges and
    built up static charges. Section 810 of the National
    Electric Code, ANSI/NFPA No. 70-1984, provides
    information with respect to proper grounding for the
    mast and supporting structure, grounding of the
    lead-in wire to an antenna discharge unit, size of
    grounding connectors, location of antenna discharge
    unit, connection to grounding electrodes and
    requirements for the grounding electrode.
    Note to the CATV system installer: This reminder is
    provided to call the CATV system installer’s attention to
    Article 820-44 of the NEC that provides guidelines for
    proper grounding and, in particular, specifies that the
    cable ground shall be connected to the grounding
    system of the building, as close to the point of cable
    entry as practical.
    NEC National Electric Code
    CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
    DO NOT REMOVE COVER (OR BACK).
    NO USER SERVICEABLE PARTS INSIDE.
    REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
    CAUTION
    RISK OF ELECTRIC SHOCK
    DO NOT OPEN
    2
Hitachi P50T501A

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Hitachi P50T501A? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Hitachi P50T501A att svara på din fråga.

Se manualen för Hitachi P50T501A helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 8.2. Den här manualen är tillgänglig på följande språk: Engelsk, Spanska. Behöver du hjälp eller har du en fråga om Hitachi P50T501A? Ställ din fråga här

Hitachi P50T501A – specifikationer

Allmänt
Varumärke Hitachi
Modell P50T501A
Produkt Plasma-TV
Språk Engelsk, Spanska
Filtyp PDF

Vanliga frågor

Nedan hittar du de vanligaste frågorna om Hitachi P50T501A .

Är din fråga inte listad? Ställ din fråga här