Horstmann CentaurPlus C11 bruksanvisning

Horstmann CentaurPlus C11
7.5 · 1
PDF anvisning
 · 2 sidor
Engelsk
anvisningHorstmann CentaurPlus C11
1.SET indicator 9.System ON indicator
2.Time of day 10.SET positions
3.Switch Period symbol 11.PROGRAMME positions
4.SET Button 12.BOOST symbol
5.BOOST or adjust (-) button 13.ADVANCE symbol
6.ADVANCE or adjust (+) button 14.AM/PM symbol
7.ENTER Button 15.PROGRAMME indicator
8.SELECT button

BATTERY

The programmer is fitted with a non-rechargeable, long life battery, which will maintain the
programmed time settings for a minimum of ten months with the supply disconnected.
THIS SHOULD BE SUFFICIENT TO COVER POWER INTERRUPTIONS DURING THE LIFE OF THE UNIT.
During power interruptions the display will be blank, after 3 days the current time of day will be lost.
These measures are to prolong the battery life.

SERVICE AND REPAIR

This programmer is NOT user serviceable. Please do not dismantle the unit.
In the unlikely event of a fault developing please refer to the RESETTINGTHEPROGRAMMERsection of
this user guide located on page 2. If this fails to resolve the problem please contact a local heating
engineer or a qualified electrician.
QUESTIONSANDANSWERS
The unit display has become frozen
The indicator neon fails to illuminate
The indicator neon will illuminate but the
pump and/or boiler fails to
operate
There is no display on the
programmer
How do I know if the programmer is still
under warranty
How is the programmer removed from the
wall
This could be due to local electrical interference
Using the RESET procedure may rectify the fault.
Using the RESET procedure may rectify the fault. If the problem persists the program-
mer will need replacing.
This may indicate a problem elsewhere in your system;
E.g. A zone valve, etc. please contact a registered installer for advice.
Try the RESET procedure on page 2, if this fails to rectify the problem please have the
mains supply checked
The CentaurPlus range comes with a 2 year guarantee from the date of
manufacture. This date is located on the rear of the unit, indicated by a month over a
year
WARNING: The CentaurPlus programmer must only be removed from it’s backplate by
either a qualified electrician or heating engineer; The programmer plugs in to a 6 pin
backplate located on the rear of the unit and is secured using 2 screws located on the
bottom surface of the unit. Undo these screws and pull forward and up in an arc
motion
LEAFLET No P60495
ISSUE 4

FRONT VIEW OF PROGRAMMER

Page 1
Page 4

The following are some of the easy to operate features:-

1 Hour Boost
Advance gives instant On/Off override
Up to 3 On/Off periods per 24Hr operation.
Programme options: Auto / All day / 24 Hours / Off
1
12
9
11
8
10
7654
2
13
14
15
3

Horstmann Controls Limited

Bristol

BS4 1UP

Email: sales@horstmann.co.uk
Website: www.horstmann.co.uk
Horstmann’s CentaurPlus - Single Channel Programmers Offer up
to three programmed operating periods per day with Boost and
Advance control.

Se manualen för Horstmann CentaurPlus C11 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.5. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Horstmann CentaurPlus C11? Ställ din fråga här

Behöver du hjälp?

Har du en fråga om Horstmann som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Horstmann -ägare att ge dig ett bra svar.

Antal frågor: 0

Allmänt
Horstmann
CentaurPlus C11
Termostat
Engelsk
Användarmanual (PDF)

Hittar du inte svaret på din fråga i manualen? Svaret kan finnas här nedan i vanliga frågor gällande Horstmann CentaurPlus C11.

Är din fråga inte listad? Ställ din fråga här

Inga resultat