Lancom LN-1700UE bruksanvisning

Lancom LN-1700UE
7.8 · 1
PDF anvisning
 · 1 sida
anvisningLancom LN-1700UE
a Power
Off Device switched off
Green, permanently* Device operational,
resp. device paired / claimed and LANCOM
Management Cloud (LMC) accessible.
Orange, permanently No adequate PoE-power supply via
802.3af, operation of the second Wi-Fi
interface not possible
Red / green, blinking Configuration password not set. Without a
configuration password, the configuration
data in the device is unprotected.
Orange / green,
blinking alternately
with the WLAN link
At least one Wi-Fi module is in
managed mode and has not found a
WLAN controller yet. The corresponding
Wi-Fi module(s) is/are switched off until a
WLAN controller has been found to supply
a configuration, or until being switched
manually into another operating mode.
Orange / red,
blinking alternately
with the WLAN link
At least one Wi-Fi module is in managed
mode and has found a WLAN controller.
However, the WLAN controller cannot
assign a configuration because the
firmware and/or the device's loader
version is not compatible with the WLAN
1x green inverse
Connection to the LMC active, pairing OK,
claiming error.
2x green inverse
Pairing error, resp.
LMC activation code / PSK not available.
3x green inverse
LMC not accessible, resp.
communication error.
b WLAN link
Off No Wi-Fi network defined or Wi-Fi module
deactivated. The Wi-Fi module is not
transmitting beacons.
Green, permanently At least one Wi-Fi network defined and
Wi-Fi module activated. The Wi-Fi module
is transmitting beacons.
Green, inverse flashing Number of flashes = number of connected
Wi-Fi stations and P2P wireless
connections, followed by a pause (default).
Alternatively the flashing frequency can
indicate signal strength over the defined
P2P link or the signal strength between
the access point and the device operating
in client mode.
Green, blinking DFS scanning or other scan procedure
Red, blinking Wi-Fi module hardware error


Power supply 12 V DC, external power adapter (110 V or 230 V) with bayonet connector to secure against
disconnection or PoE based on 802.3at via ETH1
Power consumption Approx. 20.4 W via 12 V / 2 A power adapter
(value solely refers to the power consumption of the access point),
Approx. 22.3 W via PoE
(value solely refers to the power consumption of the access point)
Environment Temperature range 0–40 °C for vertical wall mount with LANCOM Wall Mount (LN),
Temperature range 0–35 °C for horizontal ceiling mount with LANCOM Wall Mount (LN).
Access point overheating is avoided by automatic throttling of the Wi-Fi modules.
Humidity 0-95 %, non-condensing
Housing Robust synthetic housing, rear connectors, ready for wall and ceiling mounting; measures
205 x 42 x 205 mm (W x H x D)
Number of fans None; fanless design, no rotating parts, high MTBF
Bluetooth Low Energy
iBeacon The device can broadcast a configurable iBeacon.
Scanner The device can collect data of BLE devices in the neighborhood and forward this data to
external systems for evaluation purposes.
ETH1 (PoE) 10 / 100 / 1000 Base-TX, autosensing, auto node hub, line bundling via LACP,
PoE adapter compliant to IEEE 802.3at required
ETH2 10 / 100 / 1000 Base-TX, autosensing, auto node hub, line bundling via LACP
Serial interface Serial configuration interface / COM-port (8-pin mini-DIN): 9,600 - 115,000 baud
USB USB 2.0 Hi-Speed Host-Port
Wireless ePaper
The device is equipped with a Wi-Fi module for actuating LANCOM Wireless ePaper Displays in
the 2.4 GHz frequency band.
iBeacon The device is equipped with a BLE module and thus can transmit a configurable iBeacon.
Declaration of conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in
compliance with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006.
The full text of the EU Declaration of Conformity is available at the following Internet address:
Package content
Documentation Installation Guide (DE / EN), Quick Reference Guide (DE / EN)
Cable Ethernet cable, 3 m
Power adapter External power adapter, NEST 12 V / 2 A DC/S, barrel connector 2.1 / 5.5 mm bayonet,
LANCOM item no. 111590 (EU, 230 V) (not for WW devices)


*) The additional power LED statuses are displayed in 5-seconds
rotation if the device is configured to be managed by the LANCOM
Management Cloud.

Quick Reference Guide

Please observe the following when setting up the device
A For devices to be operated on the desktop, please attach the adhesive rubber
A Do not rest any objects on top of the device
A Keep the ventilation slots on the side of the device clear of obstruction
PowerAfter connecting the cable to the device, turn the connector 90° clockwise to prevent it from accidental un plugging. Use only the supplied power adapter.
Ethernet interfaceUse the cable with the Ethernet connectors to connect interface ETH1 (PoE) or ETH2 to your PC or a LAN switch.
Reset buttonPressed up to 5 seconds: device restart Pressed until first flashing up of all LEDs: configuration reset and device restart
Serial interfaceYou can optionally configure the device by connecting it to a PC with a configuration cable (separately available).
USB interface (inner right side)Connect compatible USB devices either directly to the USB interface, or use a suitable USB cable.
a b
ETH2ETH1 (PoE) Reset Config (Com)DC 12 V
ba c d
A Lockable wall and ceiling mounting with the LANCOM Wall Mount (LN)
(available as an accessory)
A Please note that when operating both Wi-Fi modules in the same frequency band, mutual
interference cannot be ruled out
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-
ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111854/01/22

Se manualen för Lancom LN-1700UE helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.8. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Lancom LN-1700UE? Ställ din fråga här

Behöver du hjälp?

Har du en fråga om Lancom som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Lancom -ägare att ge dig ett bra svar.

Antal frågor: 0

ej kategoriserat
Bruksanvisning (PDF)

Hittar du inte svaret på din fråga i manualen? Svaret kan finnas här nedan i vanliga frågor gällande Lancom LN-1700UE.

Är din fråga inte listad? Ställ din fråga här

Inga resultat