Lenmar SOLOXP-KF bruksanvisning

  • SoloXP
    Series Li-Ion Battery charger for
    Digital cameras and Video Camcorders
    Thank you for purchasing the SoloXP travel charger. The SoloXP charger with the
    appropriate adapter plate is a fully automatic battery charger which is compatible with
    virtually all 3.6 8.4 Volt Lithium-Ion batteries for camcorders and digital cameras
    from Sony, Canon, JVC, Panasonic, Nikon, Kodak, FujiFilm, Sharp, RCA and other
    manufacturers. This charger uses a variety of adapter plates to make it compatible with
    existing batteries as well as batteries that will be developed into the future. Visit
    www.lenmar.com/SoloXP for up to date adapter plate compatibility list.
    The SoloXP charger uses digital microprocessor technology to provide a safe, full
    charge every time. Charging status is provided by the built-in 2-color LED indicator.
    In addition, the SoloXP has an integrated USB Port so it can also provide the power to
    recharge your PDA, cell phone, MP3 player, handheld game, or any other device that
    can be charged from a USB port (compatible cables not included).
    Attach the adapter plate for the specific battery you will be charging.
    Removing the Adapter Plate
    To change the adapter plate you want attached, you will need to remove the adapter
    plate first by pushing down on the plate and applying firm pressure to slide it away to
    the right of the charger base. Then, attach the selected adapter plate to the charger
    unit by placing the adapter plate onto the charger, aligning the pointer on the adapter
    plate to the pointer on the charger base. While pressing down on the adapter plate,
    slide the plate firmly to the left on the charger base until it stops.
    See diagram below.
    USB Power
    The USB charging port on this unit may be used with any USB compatible device that
    is used with “Charge” or “Charge / Sync” USB cables and will provide power via that
    cable to the device allowing it to charge itself. The USB port is available for use at any
    time while the SoloXP charger is plugged into an AC outlet. While the SoloXP charger
    is plugged into AC power, simply connect your USB cable to your device and then
    plug into the USB port on the side of the SoloXP. At this time the device will indicate
    that it is receiving power and charging its internal battery.
    You may simultaneously charge your digital camera or camcorder while
    powering/charging another device thru the USB. This will not effect the battery
    charge time.
    Trouble Shooting Tips
    • If the LED status indicator does not light up when the charger is plugged into AC
    power, check to make sure that the AC outlet has power.
    • If the battery is attached, and the status indicator does not show charging, the
    battery contacts may not be properly connecting to the adapter plate. Unplug the
    unit and check connection of the battery to the adapter plate. Also, make sure
    the adapter plate is the proper one and that it is securely attached to the charger.
    • Use a clean dry cloth when necessary to keep the metal contacts of both charger
    and battery clean.
    Input 100-240VAC, 50-60Hz
    Output Charger - 4.2 / 8.4VDC, 400mA max.
    USB – 5.25VDC, 200mA max.
    Compatibility: 3.6 – 8.4 Volt Lithium-Ion (Li-Ion) rechargeable batteries
    Charge Indicator: Green – Charge complete or no battery installed
    Red - Charging
    • For use with 3.6 – 8.4V Lithium-Ion (Li-Ion) batteries ONLY! Use with other type
    batteries voids warranty, may cause damage to the charger/ battery and possibly
    cause injury to the user.
    • Do not leave a battery connected to the charger when it is not plugged into AC
    • For best battery life, we suggest recharging Li-Ion batteries after use and before
    being put away.
    • Do not leave the battery connected to the charger for prolonged periods. Remove
    the battery after charge is complete.
    • Unplug the charger from AC power when not in use.
    • Indoor use only. Do not use, place or store the charger where it may come into
    contact with water or moisture.
    • No user serviceable parts, opening chassis will void warranty.
    The indicator LED will also be Green if the SoloXP is plugged into AC power without a
    battery installed. Once the charge is complete, we recommend that you unplug the
    charger from AC power and remove the battery from the charger.
    Install the battery to be charged onto the adapter plate. Flip down the AC plug on the
    rear of the charger and plug into AC outlet. The LED charge indicator on the top of the
    unit will turn Red to indicate that the battery is being charged. Once the charge is
    complete, the indicator LED will turn Green.
    Approximate charge times are shown below.
    Limited 3 Year Warranty
    This limited warranty starts from the date of original purchase and expires three years
    thereafter. If, during this period, any part, because of manufacturing defects or
    workmanship, fails to function properly under normal use it will be repaired at no
    charge for parts and labor or, at our option, the product will be replaced. The
    following is excluded: damages from delay or loss of use of equipment or damaged
    batteries, malfunctions resulting from misuse, tampering, unauthorized repairs,
    modifications or accident.
    Package the unit and its accessories carefully using ample padding material to prevent
    damage in transit and ship it prepaid and insured to:
    4035 Via Pescador
    Camarillo, CA 93012 USA
    When sending in product for service, your package should include evidence of date
    and place of purchase. Enclose $10.00 for shipping and handling for addresses in the
    U.S. and $15.00 in Canada. For outside the U.S. and Canada, freight will vary
    depending upon ship-to address.
    For additional questions, comments or to explore other Lenmar battery solutions, visit our
    web site at: www.lenmar.com or call 805/384-9600 from 9AM – 5PM PST.
    Batt. Volt./Capacity
    3.6V, 650mAh
    3.6V, 1200mAh
    7.2V, 650mAh
    7.2V, 1200mAh
    7.2V, 2400mAh
    Max Charge Time*
    2 hrs.
    4 hrs.
    2 hrs.
    4 hrs.
    8 hrs.
    * - All times are approximate and will vary depending on battery condition and level of discharge.

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Lenmar SOLOXP-KF? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Lenmar SOLOXP-KF att svara på din fråga.

Se manualen för Lenmar SOLOXP-KF helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 8.4. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Lenmar SOLOXP-KF? Ställ din fråga här

Lenmar SOLOXP-KF – specifikationer

Varumärke Lenmar
Produkt Batteri laddare
EAN 29521560916
Språk Engelsk
Filtyp PDF
Utgångsspänning 4.2
Uteffekt 0.4
Ingångsfrekvens 50/60
Kemisk sammansättning LI-ION
Kompatibilitet Kodak KLIC-5000, KLIC-5001, KLIC-7001, KLIC-7004, KLIC-7005, KLIC-8000 & FujiFilm NP-30, NP-40, NP-60, NP-80, NP-100, NP-120
Produktens färg Silver
Tekniska data
Förpackningens vikt (imperial) 0.73


Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.


© Copyright 2020 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer