Before configuring network setup with iPhone / iPad, make
sure you have checked the followings:
(Recommended) Apply your own ADSL or cable
Internet service to simplify the network configurations.
Your camera is connected to your wireless router with
a RJ45 network cable, and it’s powered on.
If no, please download from “App Store”.
You have installed our mobile program,
EagleEyes-Lite or EagleEyes-Plus, on your iPhone or
iPad.
This quick setup assumes your network connection is
“wireless router + modem”.
For other types of connection, please download the
instructions for network configurations from
Remote access fully compatible with:
1. Internet Explorer on Windows OS
2. iPhone, iPad & Android mobile devices
www.surveillance-download.com/user/m365a.swf
iPhone / iPad
Network
Cable
(RJ45)
Wireless
Router
Modem
Camera
LAN PortWAN Port
Event Trigger
System
Install the Camera
1
2. 161
Regardless which message you see, proceed as instructed below:
Step4: Select “Apply” to confirm all your changes, and WAIT till you see the message “Done” or “Fail” in “Status”.
For
Done
, you’ll automatically return to the new device page.
For
Fail
, select “ ” on the top right side. You’ll be prompted to select “DDNS” or “Local IP”.
Select “DDNS” and return to the new device page.
Step6: Open your web browser on iPhone, and enter the IP address of your wireless router (“192.168.2.161” in
our example) to access.
Step3: Select the IP address to enter the setting page, and switch the tab from “DHCP” to “Static”.
The default port number is 88. You may change it to any value from 1 ~ 9999 (such as 8080)
if the port number of 88 is blocked.
Then, note down the IP address and port number you see here. You’ll need them in Step 7.
Step5: In the new device page, give a meaningful name for this connection in “Title”, and select “Save”.
Then, continue with Step 6 ~ 7 for port forwarding.
3
Configure with iPhone / iPad
Step1: Connect your iPhone / iPad to the wireless router
which has the camera connected.
iPhone / iPad
Network
Cable
(RJ45)
Wireless
Router
Modem
Camera
LAN PortWAN Port
Step2: Open “EagleEyes-Lite” (or “EagleEyes-Plus”),
and click “+” to enter the new device page.
Then, select “Local Network Search” to search
your network camera.
The IP address shown is the address assigned to
your camera by your router.
If you can’t find the camera,
wait for 3 minutes to search
again.
IP address assigned by your router
1
B
A
A
B
You have checked the IP address used by your wireless
router as instructed below, and written them down.
You will need them later.
Connect your iPhone / iPad to the wireless router
with the camera connected, and go to “Settings”
“Wi-Fi”. Select “>” near the selected wireless network
to enter the details.
Router:
The IP address of your wireless router
(Optional) Your wireless router supports UPnP, and
this function is enabled.
2
1
Note: Please leave some space between the
screws and wall. Do not get them to the end.
2. Hang the camera at the
screws you just fixed, and
make sure the camera
stays in place. Decide the
cable direction (up
/ down) before you fasten
the screws tight to the wall.
A
B
2
A
B
3. Drill the rest of screws ( and as shown in the
picture ) into the wall. After that, make sure all
screws are fastened.
3
C
D
C
D
3
4
4. Adjust the angle of the camera (up / down / left /
right) with the supplied wrenches for better viewing.
a
.
b
.
Anvisning
Se manualen för LogiLink AVM365 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 5.5. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om LogiLink AVM365? Ställ din fråga här
Behöver du hjälp?
Har du en fråga om LogiLink som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Samsung Galaxy A7-ägare att ge dig ett bra svar.
Antal frågor: 0
LogiLink AVM365 – specifikationer
Nedan hittar du produkt- och manualspecifikationerna för LogiLink AVM365.
Hittar du inte svaret på din fråga i manualen? Svaret kan finnas här nedan i vanliga frågor gällande LogiLink AVM365.
Vad är en megapixel?
Antalet megapixlar anger hur många pixlar det finns i sensorn. 1 megapixel motsvarar 1 miljon pixlar. Ju fler pixlar, desto högre är den potentiella bildkvaliteten.
Vad står förkortningen 'MP' för?
MP står för MegaPixels.
Vad är höjden på LogiLink AVM365?
LogiLink AVM365 har en höjd på 212.63 mm.
Vad är bredden på LogiLink AVM365?
LogiLink AVM365 har en bredd på 117.9 mm.
Vad är djupet på LogiLink AVM365?
LogiLink AVM365 har ett djup på 287.4 mm.
Är manualen för LogiLink AVM365 tillgänglig påSvenska?
Tyvärr är manualen för LogiLink AVM365 inte tillgänglig på Svenska. Denna manual finns på Engelsk.
Behöver du hjälp?
Har du en fråga om LogiLink som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Samsung Galaxy A7-ägare att ge dig ett bra svar.
Antal frågor: 0