Nevir NVR-8410 BVM bruksanvisning

Nevir NVR-8410 BVM
7.5 · 1
PDF anvisning
 · 2 sidor
anvisningNevir NVR-8410 BVM

142.00 mm

210.00 mm

NVR-8415 BVM
User instructions
Instrucciones de uso
220-240V 50/60Hz 400/600W
1Stopper 5Motor Housing
2Blender Lid 6Speed Selector
31.5L Glass Jar 7Rubber foot
4Jar Holder/Blade Unite
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read all instructions before operating.
2. Do not touch hot surfaces.
3. To protect against electrical shock, do not immerse cord, plug or appliance
.itself in water or other liquids.
4. Close supervision is necessary when appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Return the
appliance to the nearest authorized service facility for examination, repair
or adjustment.
7. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner or in a heated oven.
11. Always attach plug to appliance first, then plug cord into wall outlet. To
disconnect,turn any control to OFF position, then remove plug from wall
12. Oversized foods or metal utensils must not be inserted in the appliance as
they may cause a fire or risk of electrical shock.
13. A fire may occur if the appliance is covered or touching flammable material
including curtains, draperies, walls and the like when in operation .
14 Do not clean with metal scouring pads. Pieces can break off the pad and
touch electrical parts, involving a risk of electrical shock.
14. Extreme caution should be exercised when using containers constructed
of other material other than metal or glass.
15. Do not store any materials other than manufacturers recommended
accessories in this unit when not in use.
17. Do not place any of the following materials inside the unit: Paper,
cardboard plastic and the like.

All parts of the blender are to be thoroughly cleaned before being used for the
first time. (see Section: Cleaning).
Take out the required length of cable from the cable tidy on the base of the
blender and connect the device to the mains supply.
Assembling the Glass Jar:
1. Put the rubber sealing ring on the inner edge of the blade unit.
2. Put the blade unit with sealing ring into the cup base.
3. Insert the assembled Cup Base onto the bottom of the glass jar and secure
4. Mount the glass cup onto the cup base unit and tune the cup base unit, turn
clockwise until glass jar locks into place.
5. Mount the Measure Cup onto the Lid.
6. Secure the lid onto glass Jar and press down.
Inserting Glass Jar:
1. Make sure that the blender is switched off(Switch in the ‘0’setting.)
2. Place the jar assembly on to the motor base and press down until securely
How to Use:
1. Place the foodstuff you wish to process into the glass jar.
2. Put the lid on the glass jar and close securely.Place the measuring cap into the
hole in the lid and turn clockwise to lock.
3. Switch on the motor base.
Speed setting Use
Low(1-2 setting) for light usage with liquids
High(3-5 setting) for more solid consistency-for mixing liquids and solid
Pulse(M)setting for ice crushing short, powerful impulse movements
(The switch does not permanently engage in the 'PULSE' setting. You have to hold
the switch in the 'PULSE setting or turn it repeatedly into the 'M' Setting)
After using the blender, always move the switch into the 0 setting and pull out the
mains plug.
To remove the glass jar simply lift it off the motor base. You do not have to rotate the
glass jar to remove it.
1 minute on, 1 minute off. Total working not Exceed 3 circles.
Food capacity not exceed 300g.
Useful tips:
To chive the best results when pureeing solid ingredients, place small.
portions into the plastic jar one by one instead of placing a large quality all at
If you are processing solid ingredients, cut them into small pieces(2-3cm) first.
When mixing solid ingredients start off first with a small amount of liquid.
Gradually add more and more liquid trough the opening in the lid.
Always place your hand on top of the blender when you are operating the device
Be careful when processing hot liquids.
For stirring solid or very thick liquid ingredients we recommend that you use the
blender in impulse mode to prevent the blades from becoming stuck.
Motor Base:
Never immerse the motor base in water. Wipe it only with a moist cloth.
Simple cleaning/ rinsing out the assembled glass jar:
Empty the glass jar and fill it with water. Place the plastic jar on the motor base and
turn the switch several times into the 'M setting. Empty the glass jar and rinse until
Thorough cleaning of the dismantled glass jar:
Ensure that the glass jar is completely empty before you unscrew the retaining ring
Be careful when handling the cutting blade. All removable parts are suitable for the
*We reserve the right to make amendments.
Your small kitchen appliance is built with precision, inspected and tested before
leaving our factory. It is warranted, to the original purchaser or, to be free from any
manufacturing defects under normal use and conditions for one(1)year, cord
excluded. During that period, should the appliance fail to operate properly, return the
appliance with your sales receipt to the store where purchased. This warranty gives
you special legal rights and you may also have other rights to which you are entitled
which may vary from state to state. If you use your appliance for household use and
according to instructions, it should give you years of satisfactory service.
- Damages caused from improper usage or installation of appliance.
- Damages caused from shipping.
- Defects other than manufacturing detects.
- Breakage caused by misuse, abuse, accident, alteration, lack of proper care and
maintenance, or incorrect current or voltage.
- The loss or missing parts of the appliance. Parts will need to be purchase
- Damage from service by other than an authorized dealer or service center
any transportation and shipping charges.
RETURNS: Any return of defective merchandise to the manufacturer must be
processed accordingly by contacting customer service first to obtain RA#(Return
Authorization Number). We will not accept any returns of merchandise without an
applicable RA#.
Conformity CE
This product has been tested and produced according to all relevant current CE guidelines,
such as:
-electromagnetic compatibility Directive 2014/30/EU,
-Low voltage Directive (LVD) Directive 2014/35/EU,
-RoHS with its amendments Directive 2011/65/EU,
and has been constructed in accordance with the latest safety regulations.
The CE mark attests this product with all relevant directives.

Se manualen för Nevir NVR-8410 BVM helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.5. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Nevir NVR-8410 BVM? Ställ din fråga här

Behöver du hjälp?

Har du en fråga om Nevir som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Nevir -ägare att ge dig ett bra svar.

Antal frågor: 0

NVR-8410 BVM
Bruksanvisning (PDF)

Hittar du inte svaret på din fråga i manualen? Svaret kan finnas här nedan i vanliga frågor gällande Nevir NVR-8410 BVM.

Är din fråga inte listad? Ställ din fråga här

Inga resultat