Noctua NH-L12

Noctua NH-L12 bruksanvisning

(1)
  • Noctua NH-L12 |
    Installation Manual | LGA2011
    Installing the mounting-bars
    First screw the NM-IBT2 bolts into the screw threads of the LGA2011
    socket frame.
    Required mounting parts:
    Dear customer,
    Congratulations on choosing the Noctua NH-L12. This smaller size cooler
    packs all essential technologies of our award-winning high-end models
    into a highly compact package in order to give you the best possible quiet
    cooling experience for HTPCs and small form factor builds. I’m confident
    that you will be able to sense some of the research, attention and care
    we’ve put into making this product. Enjoy your NH-L12!
    Yours sincerely,
    Roland Mossig, Noctua CEO
    4x NM-ITS1
    Thumbscrews
    This manual will guide you through the installation process of the
    SecuFirm2™ mounting system step by step. Prior to installing the
    cooler, please consult the compatibility list on our website (www.noc-
    tua.at/compatibility) and verify that the cooler is fully compatible with
    your motherboard. Should you encounter any difficulties, please check
    the FAQs on our website (www.noctua.at/faqs) and don’t hesitate to
    contact our support team at support@noctua.at. Noctua cannot be held
    responsible for any damage or losses caused by compatibility issues.
    Multilingual versions of this manual are available on our website:
    www.noctua.at/manuals
    4x NM-IBT2
    Bolts
    Then put the NM-IMB2 mounting-bars onto the bolts.
    Caution: Choose the alignment of the mounting bars according to the
    desired final orientation of the cooler:
    Caution: Make sure
    that the curved sides of
    the mounting bars are
    pointing outwards.
    Fix the mounting bars using the NM-ITS1 thumbscrews.
    Caution: Gently tighten the screws until they stop, but don’t use excessive force.
    Applying thermal paste
    If there are residual traces of thermal paste or thermal pads on your CPU,
    please clean them off first. Then press a small drop (4-5mm diameter) of
    NT-H1 onto the centre of the heatspreader.
    Caution: Applying too much thermal paste will lower the heat conductivity
    and cooling performance!
    2x NM-IMB2
    Mounting-Bars
    Fastening the heatsink to the CPU
    Caution: Tighten the screws until they stop.
    Caution: Please first take off the protection cover at the bottom side of the
    heatsink and remove the rubber support bar between the bottom fan and
    the base of the heatsink!
    Take off the top fan. Then put the heatsink onto the CPU and screw it to
    the screw threads of the mounting bars. Note that you can reach through
    the blades of the lower fan using the supplied screw driver. There is thus
    no need to take off the lower fan for installation.
    Even with high-grade products and strict quality control, the possibility of
    defects cannot be eliminated entirely. Therefore, we aim at providing the
    highest possible level of reliability and convenience by offering a warranty
    period of 6 years and direct, fast and straightforward RMA service.
    Should you encounter any problems with your NH-L12, please don’t
    hesitate to contact our support team (support@noctua.at).
    Please also consult the FAQ section on our website: www.noctua.at/faqs.
    Warranty, Support and FAQs
    The NH-L12 can be used with both fans for maximum performance or with
    the NF-B9 fan only in order to reduce the total height to 66mm:
    If you want to use both fans, put the NF-F12 fan back on. If you don’t
    run the NF-F12 on the CPU cooler, you can use the supplied fan screws or
    silicone Vibration-Compensators to install it inside your case.
    Connect the fan(s) to the mainboard. Use the supplied NA-YC1 y-split
    cable to connect both fans to one fan header.
    Depending on your CPU and the temperature inside the case, you may
    interconnect the supplied NA-RC6 and NA-RC7 Low-Noise Adapters
    (L.N.A.) in order to further reduce the fans operating noise. Use the NA-
    RC6 for the NF-F12 120mm fan and the NA-RC7 for the NF-B9 92mm fan.
    Caution: Never use one adaptor for both fans by putting it before the
    y-split cable.
    Caution: When using the L.N.A., check the temperature of your CPU using
    appropriate software (e.g. the respective applications of your mainboard
    manufacturer), in order to evade automatic throttling of the CPU due to the
    increased temperature. If the cooling performance is insufficient, please
    increase case ventilation or remove the L.N.A.
    Step 1 Step 2
    Dual fan mode
    height 93mm
    Single fan mode
    height 66mm
    Fan Setup
    Step 4
    Step 1
    Step 2
    Step 3
    Mainboard Fans
    Low-Noise Adaptor Y-Split Cable
    Y-Split Cable Low-Noise Adaptors
    Caution: In tower style
    cases, please avoid
    installing the NH-L12
    with the bends of the
    heatpipes pointing
    upwards as this may
    result in reduced
    cooling performance.
Noctua NH-L12

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Noctua NH-L12? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Noctua NH-L12 att svara på din fråga.

Se manualen för Noctua NH-L12 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 6.1. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Noctua NH-L12? Ställ din fråga här

Noctua NH-L12 – specifikationer

Allmänt
Varumärke Noctua
Modell NH-L12
Produkt Kylsystem för dator
EAN 191120014081, 4716123314653, 842431014016
Språk Engelsk
Filtyp PDF
Prestanda
Modell Cooler
Lämplig för Processor
Fläktdiameter -
Stödd processor uttag Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1
Ljudnivå (hög hastighet) -
Design
Produktens färg Aluminium, Copper colour
Vikt & dimension
Bredd 128
Djup 150
Höjd 66
Vikt 415

Bruksanvisni.ng

Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

Bruksanvisni.ng

© Copyright 2020 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer