Cabinet Construction Based on Takamine Voicing Acoustic Technology
The project team chose mahogany—a wood that is widely used to construct
high
-
quality guitars—as the base material for this speaker.The mahogany is used
as part of a three-layer laminate:two outer mahogany layers with an inner
plywood layer.The cabinet was built by closely following methods used in the
making of Takamine guitars. Of particular note is the bracing inside the cabinet
that contributes to tonality.As Takamine stressed,it is particularly important to
use the material’s strength effectively throughout.What followed was a detailed
fine-tuning process of the cabinet that continued until all parties were satisfied.
To include the baffle with one rounded piece, it was necessary to consider how
standing waves and diffraction within the cabinet would affect the speaker’s
sound.Then, to support the woofer/tweeter units and the network circuit,the
team reinforced the interior with MDF to remove any unnecessary vibrations.
To construct a speaker like a guitar,where
one flat piece of material is manipulated
to achieve its symmetry is an extremely
difficult process.Recognizing Takamine’s
contribution,the construction process
has been named “Takamine Voicing
Acoustic Technology.”
New A
-
OMF Monocoque Diaphragm to Support Woofer Unit
As the latest development in Onkyo Micro Fiber
(
OMF
)
for woofer diaphragms,
A
-
OMF Monocoque forms one continuous cover from the center cap over the
whole diaphragm’s surface. Like Advanced Onkyo Microfiber
(
A
-
OMF
)
,A
-
OMF
Monocoque comprises three layers:an outer polyethylene naphthalate
(
PEN
)
layer, an inner aramid layer,and a flexible cotton weave layer between the
two.The PEN has a twill
(
textile weave
)
that enables the fiber’s weight to be
reduced by 30%.By forming one continuous layer over the surface off the
diaphragm woofer,A
-
OMF Monocoque helps prevent breakup
(
occurring when
the cone flexes instead of moves as a perfect piston
)
.Essentially, the fiber is an
integral part of the woofer unit,and it serves as a perfect complement to the
woofer unit’s piston motion range.
Inspired Guitar Craftsmanship and Proven Technology Breaks New Boundaries
The musicality and acoustic personality of a superbly crafted guitar represents more than a physical musical instrument.It should also be
thought of as a work of art.This understanding has been a central theme of a joint development project between Onkyo and renowned guitar
maker,Takamine, to make a speaker that expresses the positive qualities of both speaker performance and musical instrument design and
construction.Onkyo first approached Takamine with the objective of working together to reproduce the natural sound of an accomplished
musical instrument.With a combined knowledge of vibrating enclosures,the project team set out to create a cabinet based on Takamine’s
“Acoustic Voicing Technology”construction with Onkyo’s speaker expertise.What has been realized is a speaker design that draws on two
unique sound philosophies to create a truly revolutionary loudspeaker.
Highly Responsive Ring
-
Drive Tweeter to Take Frequency Response
out to 100 kHz
The D
-
TK10’s ring-drive tweeter enables an accurate response at high
frequencies.The tweeter is designed to take the control of breakup to its limits,
and its piston motion enables it to reach the higher end of the frequency range
(
with no sign of breakup
)
.With the tweeter’s aluminum equalizer,it is possible
to get a flat frequency response out to 100 kHz.The whole tweeter unit works
to prevent any necessary vibration and to completely remove any noise.
Aero Acoustic Drive to Cut Off High Frequency Interference
Poorly designed bass reflex speakers will be affected by membrane overshoot
and poor transient response behavior.With any vented design, the size and
placement of the duct is crucial in ensuring that the woofer’s rear
-
firing and
front
-
firing waves are both in phase.Through its own research of different duct
shapes,Onkyo has developed a long,narrow duct—called the Aero Acoustic
Drive—that has been proven to be more effective than a circular duct in
separating low and high frequency sounds.The bottom duct is separated from
the cabinet to further reduce cabinet vibrations.The end result is a more
natural,precise sound output.
High Quality Network Circuit with Quality Parts
The D
-
TK10’s network circuit has a ground potential that is free of any
fluctuations,making it possible to generate high-quality audio playback.The
circuit also helps to prevent the masking of faint sounds.The parts that make
up the D
-
TK10—including a high-quality, German-made WIMA film capacitor;
a leakage
-
free cable; and gold-plated banana plug-compatible speaker
posts—have been included based on the know-how that Onkyo has gained
from years of speaker development.
D-TK10_2k 06.5.25 1:16 PM Page 1
Anvisning
Se manualen för Onkyo D-TK10 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.6. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Onkyo D-TK10? Ställ din fråga här
Behöver du hjälp?
Har du en fråga om Onkyo som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Samsung Galaxy A7-ägare att ge dig ett bra svar.
Antal frågor: 0
Onkyo D-TK10 – specifikationer
Nedan hittar du produkt- och manualspecifikationerna för Onkyo D-TK10.
Hittar du inte svaret på din fråga i manualen? Svaret kan finnas här nedan i vanliga frågor gällande Onkyo D-TK10.
När är min volym för hög?
En volym över 80 decibel kan vara skadlig för hörseln. När volymen överstiger 120 decibel kan direkt skada uppstå. Risken för hörselskador beror på lyssningsfrekvensen och varaktigheten.
Kan Bluetooth-enheter av olika märken anslutas till varandra?
Ja, Bluetooth är en universell metod som gör att olika enheter utrustade med Bluetooth kan ansluta till varandra.
Vad är Dolby Atmos?
Dolby Atmos är en teknik som bygger på att ljudet reflekteras i taket tillbaka till där du sitter och lyssnar. Detta gör det möjligt att skapa en 5.1-effekt med endast en högtalare.
Vad är Bluetooth?
Bluetooth är ett sätt att utbyta data trådlöst mellan elektroniska enheter via radiovågor. Avståndet mellan de två enheterna som utbyter data kan i de flesta fall vara högst tio meter.
Vad är vikten på Onkyo D-TK10?
Onkyo D-TK10 har en vikt på 2900 g.
Vad är höjden på Onkyo D-TK10?
Onkyo D-TK10 har en höjd på 276 mm.
Vad är bredden på Onkyo D-TK10?
Onkyo D-TK10 har en bredd på 133 mm.
Vad är djupet på Onkyo D-TK10?
Onkyo D-TK10 har ett djup på 220 mm.
Är manualen för Onkyo D-TK10 tillgänglig påSvenska?
Tyvärr är manualen för Onkyo D-TK10 inte tillgänglig på Svenska. Denna manual finns på Engelsk.
Behöver du hjälp?
Har du en fråga om Onkyo som inte besvarats i manualen? Ställ din fråga här. Ge en heltäckande beskrivning av problemet och formulera din fråga så tydligt som möjligt. Ju tydligare problemet beskrivs och frågan ställs, desto enklare är det för andra Samsung Galaxy A7-ägare att ge dig ett bra svar.
Antal frågor: 0