Read this user manual carefully before you use the appliance, and save the user manual for
•Do not immerse the motor unit in water nor rinse it
under the tap.
•Before you connect the appliance to the power, make
sure that the voltage indicated on the bottom of the
appliance corresponds to the local power voltage.
•If the power cord, the plug, or other parts are
damaged, do not use the appliance .
•If the power cord is damaged, you must have it
replaced by Philips, a service center authorized by
Philips, or similarly qualied persons to avoid a hazard.
•This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
•Children should be supervised to ensure that they do
not play with the appliance.
•Do not touch the blades, especially when the appliance
is plugged in. The blades are very sharp.
•If the blades get stuck, unplug the appliance before you
remove the ingredients that block the blades.
•Before you connect the mixer to the mains, insert the
beaters, kneading hooks, or blender bar into the mixer.
•Before you switch on the appliance, lower the beaters,
kneading hooks, or blender bar into the ingredients.
•Switch off the appliance and disconnect it from the
mains if you leave it unattended and before you
assemble, disassemble and clean it.
•Never use any accessories or parts from other
manufacturers or that Philips does not specically
recommend. If you use such accessories or parts, your
guarantee becomes invalid.
•This appliance is intended for household use only.
•Do not exceed the quantities and processing time
indicated in the user manual.
•Do not process more than one batch without
interruption. Let the appliance cool down for ve
minutes before you continue processing.
•Noise level = 85 dB [A]
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure
to electromagnetic elds.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When you see the crossed-out wheel bin symbol attached to a product, it means the
product is covered by the European Directive 2002/96/EC:
Never dispose of your product with other household waste. Please inform yourself about the
local rules on the separate collection of electrical and electronic products. The correct
disposal of your old product helps prevent potentially negative consequences on the
environment and human health.
Congratulations on your purchase and welcome to Philips! To fully benet from the support
that Philips offers, register your product at www.philips.com/welcome.
The Philips mixer with bar blender can condently handle a large variety of ingredients. With
the powerful ve speeds and turbo, the stainless steel wire beaters/strip beaters and kneading
hooks make light work of the toughest dough.
HR1574/HR1575 is equipped with the innovative FlexiMix system, which allows the beaters
and dough hooks to move up and down when they touch the bowl. The two wire beaters/strip
beaters (or kneading hooks) move independently of each other, which allows them to adjust to
the shape of every bowl. As a result, it is much easier to reach every part of the bowl and to
mix all ingredients thoroughly. The FlexiMix system makes the mixer easier to handle and gives
you better control over the mixing process.
3 Overview (fig.1)
a Turbo knob
• (For the wire beaters/strip beaters/kneading hooks only) Press and hold to increase
the speed for a heavy job
• (For the bar blender only) Press and hold to switch on the bar blender
b Speed control
• 0: Switch off the wire beaters/strip beaters/kneading hooks
• 1 2 3 4 5: Switch on the wire beaters/strip beaters/ kneading hooks and select a
c Eject button
• Press to release the inserted wire beaters/strip beaters/kneading hooks
d FlexiMix switch (HR1574/HR1575 only)
• : FlexiMix off
• : FlexiMix on
e Door for the wire beaters/strip beaters/kneading hooks
f Two wire beaters (depending on countries)
g Two strip beaters (depending on countries)
h Two kneading hooks
i Plastic bar blender (HR1572/HR1577 only)
j Metal bar blender (HR1574/HR1575 only)
k Power cord
l Door for bar blender/chopper
m Chopper lid (HR1577 only)
n Chopper blade (HR1577 only)
o Chopper bowl (HR1577 only)
p Storage beaker cap (HR1574/HR1575 only)
q Storage beaker
r Cord clip
4 Using the appliance
Before rst use
Before you use the appliance for the rst time, thoroughly clean the parts that come into
contact with food.
1 Clean the motor unit with a moist cloth.
2 Clean the beaters, kneading hooks, bar blender, and beaker in warm water with some
washing-up liquid or in a dishwasher.
Wire beaters/strip beaters/kneading hooks (g.2)
1 Select an appropriate speed, from 1 to 5, to switch on the wire/strip beaters or kneading
hooks. To avoid splashing, start mixing at a low speed, and then switch to a higher speed.
• For a heavy job, press and hold the TURBO button while processing.
• (For HR1574/HR1575) To use the FlexiMix function, switch on the FlexiMix Button.
2 After use, turn the speed selector to 0, and then unplug the appliance.
3 Press to release the wire/strip beaters or kneading hooks.
If the door for the wire beaters, strip beaters, or kneading hooks is blocked, close the bar
blender door to open it.
Bar blender (g.3)
1 Make sure that the speed selector is turned to 0.
2 Open the door for the bar blender.
3 Insert the bar blender into the back of the main unit, and then turn it clockwise until the
indication on the bar blender and the one on the main unit align.
4 Press and hold to switch on the bar blender.
5 After blending, unplug the appliance, and then turn the bar blender anticlockwise to
6 Close the bar blender door.
(For HR1574/HR1575) You can use the storage beaker cap to hold the accessories before
Chopper (g.4, HR1577 only)
Be very careful when you handle the blade unit, the blades are very sharp. Be particularly careful
when you remove the blade unit from the chopper bowl, when you empty the chopper bowl
and during cleaning.
•When chopping soybean, use the maximum quantity (200g) with TURBO speed for 5 seconds
for best result.
•For frozen beef cube, use the maximum size of 2x2x2 cm when processing.
If the ingredients stick to the wall of the chopper bowl, loosen them with a spatula.
•Do not process more than 1 batch without interruption. Let the appliance cool down to room
temperature before you continue processing.
•Make sure that the speed selector is turned to 0 (off position).
•Insert the chopper into the door.
•Press and hold to switch on the chopper. The speed selector is locked at 0 (off position) and
does not work.
•Close the bar blender door after use.
5 Recipe (fig.5)
• 250 g our
• 150 g rye our
• 250 g honey (cold)
• 150 g sugar
• 11 g yeast
• 4 g cinnamon
• 50 ml milk
• 1 egg
1 Put the ingredients in a bowl.
2 Select speed 5.
3 Mix the mixture with the wire beaters/strip beaters for 1 minute.
4 Put the bowl with the dough in a warm place for 20 minutes.
5 Press and hold to mix the ingredients for 10 seconds.
6 Bake the spice bread in a baking tin at 180°C for approximately 1 hour.
This recipe is extremely demanding on your mixer. Let your mixer cool down to room
6 Cleaning and storage (fig.6 & 7)
Before you clean the appliance or release any accessory, unplug it.
1 Clean the motor unit with a moist cloth.
2 Clean the beaters, kneading hooks, blender bar, and beaker in warm water (<60°C) with
some washing-up liquid or in a dishwasher.
3 Store the product in a dry place.
7 Order accessories
To purchase accessories for this appliance, please visit our website www.philips.com/shop. If
you have any difculties obtaining accessories for your appliance, please contact the Philips
Consumer Care Centre in your country. You will nd the contact details at www.philips.com/
You can order a direct-driven mini chopper (under service code number 3140 039 00211)
from your Philips dealer or a Philips service center as an extra accessory for HR1572, HR1574,
HR1575, HR1577. Use the quantities, processing time and speed of the mini chopper for this
8 Guarantee and service
If you have a problem, need service, or need information, see www.philips.com/support or
contact the Philips Consumer Care Center in your country. The phone number is in the
worldwide guarantee leaet. If there is no Consumer Care Center in your country, go to your
local Philips dealer.
PTManual do utilizador
ESManual del usuario
Behöver du hjälp?
Antal frågor: 0
Behöver du hjälp eller har du en fråga om Philips Viva Collection HR1577? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Philips Viva Collection HR1577 att svara på din fråga.
Om Philips Viva Collection HR1577
Se manualen för Philips Viva Collection HR1577 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.5. Den här manualen är tillgänglig på följande språk: Zweeds, Engels, Nederlands, Duits, Frans, Spaans, Italiaans, Portugees, Deens, Noors, Fins, Turks, Grieks, Arabisch. Behöver du hjälp eller har du en fråga om Philips Viva Collection HR1577? Ställ din fråga här