RCA RCR311BIR

RCA RCR311BIR bruksanvisning

(1)
  • In most cases, the keys on
    this remote perform the same
    functions as the keys on your
    original remotes once you’ve
    programmed this remote to
    operate your components.
    Many keys on this remote
    have other functions as well.
    Illuminated ON•OFF key
    serves as an indicator light to
    provide feedback.
    Device keys (TV,
    SAT•CBL•DTC, VCR•DVD) put
    the remote in the right mode
    to control your device.
    Backlight key (
    ) turns
    backlighting on/off.
    GUIDE and MENU put the
    remote in menu/guide mode,
    which makes the CH/VOL
    keys serve as arrow keys;
    they also access the same
    features as the keys on your
    original remotes.
    Battery Saver
    Your universal remote control saves battery power by
    automatically turning off if any key is pressed for more than
    60 seconds. This saves your battery life should your remote
    get stuck in a place where the keys remain depressed, such as
    between sofa cushions.
    Universal Remote Control
    Owner’s Manual
    RCR312WR / RCR311BR / RCR311BIR /
    RCR311SR / RCR311STR
    Manual del Propietario (parte posterior)
    Care and Maintenance
    • Keep the remote dry. If it gets wet, wipe it dry immediately.
    • Use and store the remote only in normal temperature
    environments.
    • Handle the remote gently and carefully. Don’t drop it.
    • Keep the remote away from dust and dirt.
    • Wipe the remote with a damp cloth occasionally to keep it
    looking new.
    • Modifying or tampering with the remote’s internal devices can
    cause malfunction and invalidate its warranty.
    SAVE THIS MANUAL AND THE CODE LISTS!
    Remote controls can sometimes lose their programming
    when you change the batteries. Make sure you keep the
    manual and code lists in a safe place so that you can
    reprogram the remote if you need to.
    Tip: This remote is already programmed to operate
    most RCA-branded TVs, VCRs, DVD players and satellite
    receivers. Just press the corresponding key—VCR•DVD
    for a DVD player, TV for a television, SAT•CBL•DTC for a
    satellite receiver.
    Your universal remote requires two
    AA alkaline batteries
    (batteries may or may not be included, depending on model).
    To install the batteries:
    1. Remove the battery
    compartment cover.
    2. Insert the batteries, matching
    the batteries to the (+) and
    (–) marks inside the battery
    compartment.
    3. Push the battery cover back into
    place.
    Battery Precautions:
    • Do not mix old and new batteries.
    • Do not mix alkaline, standard (carbon-zinc) or
    rechargeable (nickel-cadmium) batteries.
    • Always remove old, weak or worn-out batteries promptly
    and recycle or dispose of them in accordance with Local
    and National Regulations.
    To use this universal remote with your home entertainment
    system, fi rst you need to program it to control your devices.
    There are four ways you can program the universal remote to
    operate your devices:
    • The Auto Code Search goes automatically through all the
    codes for the device you’re trying to control. It’s the easiest
    method, but it can sometimes take longer than some of the
    other programming methods.
    The Brand Code Search searches through the codes for
    select brands of devices. It’s not as easy as the auto code
    search, but it can be faster.
    The Direct Code Entry lets you enter a code from the
    accompanying code list for your brand of device. It’s not as
    easy as the other methods, but it’s potentially the fastest
    method.
    The Manual Code Search lets you manually go through
    all the codes for the device you’re trying to control.
    Testing the Code for Maximum Functionality
    1. Try a variety of the device’s functions with the remote. If
    some device features don’t work, go to next step to try a
    different code.
    2. Repeat the Auto Code Search Method from the beginning.
    When your device turns off, do not stop searching.
    Instead, with the unit now off, continue to press the PLAY
    key every 5 seconds until the unit turns back on.
    3. Once the unit turns back on, press the REVERSE key on the
    remote every 2 seconds until your device turns off again.
    When your device turns off again, press the STOP key.
    Auto Code Search
    The Auto Code Search goes automatically through all the
    codes for the device you’re trying to control. When you fi nd
    the one that operates your device, you can stop the search and
    store that code.
    TIPS: Each device key is associated with a type of device—
    the TV is preset to search for TVs, SAT•CBL•DTC for satellite
    receivers, cable boxes or digital TV converters (DTC), and
    VCR•DVD for VCRs or DVD players.
    To exit without saving a new code at any point in the Auto
    Code Search, press the
    GO BACK key.
    1. Manually turn on the device you
    want to control.
    3. Press and hold the device key you want to program. While
    you’re holding down the device key, use your other hand
    to press and hold the remote’s ON•OFF key at the same
    time.
    4. Wait until the ON•OFF key comes on and stays on. Then
    release both keys.
    5. Point the remote directly at the
    front panel of the device you
    want to control. Press PLAY on
    the remote and wait 5 seconds.
    The remote is testing a batch of
    10 codes on your device.
    Did your device turn off?
    YES: Go to step
    6.
    NO: Press PLAY again. The remote tests the next batch of
    10 codes.
    Keep pressing PLAY every 5 seconds until your device turns
    off.
    6. When your device turns off, press
    the REVERSE key on the remote
    and wait at least 2 seconds.
    The remote tries the last of the
    previous ten codes.
    Did your device turn on?
    YES: Press the STOP key. You’re
    done! You’ve programmed this
    device key.
    NO: Press REVERSE again. The remote tests the next
    code in the batch.
    Keep pressing REVERSE every 2 seconds until your device
    turns back on. When it does, press STOP.
    Note: If you accidentally press the REVERSE key after your
    device turns on, press the FORWARD key. Then, wait two
    seconds to see if your device turns off again.
    NOTES
    Throughout the programming of each key, be sure to keep
    the remote pointed at the IR sensor of the device you are
    currently programming the remote to control.
    Test the remote with the device to make sure the
    device key is programmed with the correct code for
    maximum functionality. If some features don’t work, try
    a different code. See the “Testing the Code for Maximum
    Functionality” section below for more information.
    During the Auto Code Search, the remote ignores
    keypresses that aren’t part of the search.
    The search times out after two minutes (the ON•OFF key
    blinks four times and turns off, and the last programmed
    code under that device key is retained).
    The ON•OFF key blinks four times and turns off when the
    remote has gone through all the codes. The remote exits
    the Auto Code Search. If your device hasn’t turned off yet,
    try a different search method.
    Testing the Code for Maximum Functionality
    1. Try a variety of the device’s functions with the remote. If
    some device features don’t work, go to the next step to try
    a different code.
    2. Repeat the Brand Code Search from the beginning. When
    the device turns off for the fi rst time, don’t press the STOP
    key, which would store the same code. Instead, with the
    unit now off, continue to press the
    ON•OFF key repeatedly
    until the unit turns back on.
    3. Once the unit turns back on, you have found another code
    that operates the device. Press the STOP key.
    4. Test the key’s functionality again by attempting to control
    a variety of the device’s functions. If the code that has
    been stored controls the majority of the device’s functions,
    programming is complete. If the code stored does not give
    maximum functionality, try another code.
    Brand Code Search
    The Brand Code Search goes through only the codes for one of
    the select brands listed in the accompanying code list. If your
    brand of device is listed, this search can be very quick and easy.
    TIPS: Each device key is associated with a type of device—the
    TV is preset to search for TVs, SAT•CBL•DTC for satellite
    receivers, cable boxes or digital TV converters (DTC), and
    VCR•DVD for VCRs or DVD players.
    The ON•OFF key serves as an indicator light during
    programming, giving you feedback at each stage of the process.
    To exit without saving a new code at any point in the Brand
    Code Search, press the
    GO BACK key.
    1. Manually turn on the device you
    want to control.
    4. Press and hold the device key you want to program. While
    you’re holding down the device key, use your other hand
    to press and hold the remote’s ON•OFF key at the same
    time.
    5. Wait until the ON•OFF key comes on and stays on. Then
    release both keys.
    7. Point the remote directly at the
    front panel of the device you want
    to control. Press ON•OFF on the
    remote and wait 2 seconds. The
    remote is testing a single code for
    your device’s brand.
    Did your device turn off?
    YES: Press the STOP key to store the code. You’re done!
    You’ve programmed this device key.
    NO: Press ON•OFF again. The remote tests the next code
    for your brand.
    Keep pressing ON•OFF every 2 seconds until your device
    turns off. When it does, press STOP.
    3. Find your device’s brand in the
    Brand Code list section of the
    accompanying code list. Circle
    the number for your brand and
    keep the list handy.
    Code Lists
    Brand Codes are used for programming using the
    B
    ra
    n
    d Code Se
    a
    rch
    an
    d
    Entry
    m
    e
    thod
    ou
    tlin
    ed in the User’s G
    u
    ide.
    Lista de Códigos
    Los códig
    o
    s de las marcas son utilizados para programar utilizando
    los mé
    t
    odo
    s
    d
    e
    b
    ú
    sque
    d
    a y
    en
    tr
    ad
    a
    de
    cód
    i
    g
    o
    s
    de
    m
    a
    r
    c
    a
    s
    , re
    sal
    tado
    e
    n la g
    u
    í
    a d
    el
    u
    su
    ario
    .
    0123456789
    R
    CA
    GE
    P
    R
    OSC
    A
    N
    Insignia
    JVC
    Ma
    gnavo
    x
    P
    h
    il
    i
    ps
    Pa
    n
    a
    soni
    c
    S
    a
    m
    s
    un
    g
    Sh
    a
    rp S
    o
    ny T
    o
    shiba Vizi
    o
    TV
    VCR
    0
    1
    234
    5
    678
    9
    RCA
    GE
    P
    R
    OSCAN
    Ape
    x
    JVC
    Magnavox
    Phi
    li
    ps
    Pa
    n
    a
    s
    o
    n
    ic
    P
    i
    o
    n
    e
    e
    r
    S
    a
    msu
    n
    g
    Sh
    a
    rp
    So
    ny
    To
    s
    hib
    a
    DVD
    SAT/CABLE
    0
    1
    23
    4
    56789
    RCA
    G
    E
    P
    RO
    SC
    A
    N
    Motorola Di
    r
    ecTV
    Dish Network
    S
    y
    s
    te
    ms/
    E
    c
    hos
    ta
    r
    Ge
    neral
    I
    ns
    t
    ruments
    Hughes
    Ne
    two
    rk
    Systems
    Sc
    ientific
    A
    t
    l
    a
    n
    t
    a
    Ma
    g
    navox
    Philips
    A
    M
    NIO
    ADB
    P
    an
    aso
    n
    i
    c
    Brand Code List/Lista de Cód
    igos de Marcas
    0123456789
    Sams
    u
    ng
    Magnavox
    P
    h
    i
    l
    ips
    Mitsubishi Panasonic Sharp
    S
    ony Toshiba
    RC
    A
    G
    E
    P
    ROS
    CAN
    J
    V
    C
    S
    y
    m
    phonic
    Adm
    i
    ral
    .................................
    Adven
    t
    ......
    .
    .
    ..
    ...
    .
    ..
    .
    .
    .
    ...
    .
    ....
    .
    ..
    .
    .
    .
    .
    .........
    A
    i
    ko .
    .
    ......................
    .
    ........
    .
    ..
    .
    ...
    .
    ..
    .
    .
    .
    ........
    ..
    .
    .
    Aka
    i
    .
    .
    ...
    .
    .
    .
    ...
    .
    .......
    .
    ...
    .
    .....1081
    2
    ,
    1
    1
    6
    75
    ,
    1
    0060, 1
    Al
    b
    atron ..
    .
    ...
    .
    .
    .
    .
    ..
    ...
    ..
    .
    .
    .
    .....
    ..
    .
    .
    ......
    .
    ....
    .
    ............................
    America Acti
    o
    n ...............
    .
    ........
    .
    .
    ..
    ...
    .
    .
    .
    ..
    .
    ...
    .
    ....
    .
    .
    ..
    .
    .
    .
    ......
    Anam ...................................................
    .
    .
    .
    ..................
    AOC ....................
    .
    ...................................................
    A
    pex Digital
    ....
    .
    .
    .
    ..
    .
    .
    ....
    .
    ...
    .
    .........
    .
    .
    .
    ........
    10
    156, 107
    Audi
    ov
    o
    x
    ....
    .
    ....
    .
    .
    .
    ....
    .
    .
    .
    ..
    .
    ...
    .
    ....
    .
    10451, 10180, 100
    .............................
    .
    .........
    .
    .....
    .
    .
    ..
    .
    .
    ....
    .
    .
    .
    .
    ..
    108
    7
    5,
    1
    Ave
    n
    tu
    r
    a
    .
    ..
    .
    .
    .
    ..
    ...
    .
    .
    .
    .
    ..
    .
    .
    .
    ....
    .
    ...
    .
    ..
    .
    ........
    .
    ........
    .
    .......
    Axion ....
    .
    .........
    .
    .
    ..
    ...
    .
    .
    .
    ..
    .
    ...
    .
    ..
    .
    .
    ..
    .....
    .
    .
    ..
    .
    .
    .
    .
    .
    ..
    .
    .
    .
    ...
    .
    .
    Bell & Howell ....
    .
    ....................
    .
    .............
    .
    ....
    .
    .
    BenQ .......................................
    .
    ................
    .
    .
    B
    r
    ad
    ford ..
    .
    .....
    .
    ..........................................
    Bro
    kso
    nic
    ....
    ..
    .
    .
    .....
    .
    .
    .............
    .
    ...........
    .
    ......
    Candl
    e
    .
    .
    .
    .
    ........
    .
    ...
    .
    ..
    .
    .
    .
    .
    ..
    ...
    .
    .
    .
    ..
    .
    ...
    .
    ....
    .
    .
    .
    ..
    .
    .
    .
    C
    a
    rn
    i
    vale ..
    .
    ......
    .
    ........
    .
    ....
    .
    ...
    .
    .
    .
    .
    .
    .........
    .
    ..
    Ca
    r
    v
    er ..
    .....
    .
    .
    ..
    ..
    ....
    ..
    .
    ...
    .
    .
    .......
    .
    .
    .
    ...........
    .
    .
    Celera ......................
    .
    ........
    .
    ....
    .
    .
    .
    ..
    .
    ...
    .
    Changhong .................................
    .
    .
    Citi
    z
    en ........
    .
    ........
    .
    .......................
    Cl
    ario
    n
    ..
    .
    .
    .
    ...
    .
    ..
    .
    ....
    .
    ...
    .
    ..
    .
    .
    .
    ....
    .
    ........
    Co
    m
    m
    e
    rc
    i
    al Solut
    i
    ons
    ....
    .
    ..
    .
    .
    .
    .
    .
    C
    oncerto .
    .
    .........
    .
    ............
    .
    .
    .
    .....
    Cont
    ec .....
    ..
    .
    ..
    .
    .
    ......
    .
    ....
    .
    ...
    .
    ..
    .
    .
    .
    .
    Craig .......
    .
    .
    .
    ...
    .
    .
    .
    ..
    .
    ....
    .
    .
    .
    .
    ...
    .
    ..
    ..
    Crosley .............................
    Cr
    o
    wn ...
    .
    .............
    .
    ..........
    Cur
    ti
    s Mathes ............
    .
    ..
    .
    .
    .
    ...
    ..
    .
    .
    ....
    .
    ...
    .
    ..
    .
    ......
    .
    ........
    ....
    .
    .
    .
    .........
    .
    ...
    .
    .........
    .
    .
    .
    .
    .
    CXC .
    .
    ......
    .
    ........
    .
    ..
    .
    .
    .
    ...
    Cyt
    r
    o
    n
    ...
    .
    ....
    .
    .
    ..
    ...
    .
    .
    .
    .
    Daewoo
    ..............
    Dell .....................
    Denon ..............
    D
    i
    a
    m
    on
    d
    Visi
    o
    Dumon
    t
    ....
    .
    .
    .
    .
    D
    urabrand .
    Dwi
    n
    ..
    .
    ....
    .
    .
    .
    Dynex ....
    .
    .
    Electrogra
    Electroh
    Eme
    rs
    o
    .
    .
    ...
    .
    ...
    Em
    p
    r
    E
    nvi
    ESA
    Fi
    F
    6. Look at the number you circled for
    your device’s brand code number.
    Press that number on the remote
    keypad.
    NOTES
    Throughout the programming of each key, be sure to keep
    the remote pointed at the IR sensor of the device you are
    currently programming the remote to control.
    Test the remote with the device to make sure the device
    key is programmed with the correct code for maximum
    functionality. If some features don’t work, try a different
    code. See the “Testing the Code for Maximum Functionality”
    section below for more information.
    During the Brand Code Search, the remote ignores
    keypresses that aren’t part of the search.
    The search times out after two minutes (the ON•OFF key
    blinks four times and turns off, and the last programmed
    code under that device key is retained).
    The ON•OFF key blinks four times and turns off when the
    remote has gone through all the codes. The remote exits the
    Brand Code Search. If your device hasn’t turned off yet, try a
    different search method.
    Direct Code Entry
    Direct Code Entry lets you enter a code from the accompanying
    code list for your brand of device. It’s not as easy as the other
    methods, but it’s potentially the fastest method.
    1. Manually turn on the device you
    want to control.
    3. Press and hold the device key you want to program (the
    ON•OFF key comes on).
    While you’re holding down the device key, use your other
    hand enter the fi rst fi ve-digit code for your brand in the
    code list (the ON•OFF key goes off after the fi rst digit).
    2. Find the Code List that came with
    the remote. Locate the section for
    the type of device you’re trying to
    program, and fi nd your brand in
    that section. Circle the codes for
    your brand and keep them handy.
    Code Lists
    Brand
    Codes are u
    sed for programming using the Brand Code Search
    and Entry method outlined in the User’s Guide.
    Lista de Códigos
    L
    o
    s
    cód
    i
    gos d
    e
    l
    a
    s
    m
    a
    rc
    as
    s
    on uti
    l
    izados para programar util
    i
    zando
    l
    o
    s
    tod
    os
    d
    e
    b
    ú
    s
    queda y entra
    d
    a
    de
    c
    ó
    digos de m
    arc
    a
    s
    ,
    r
    esaltad
    o
    en la guía del us
    u
    ario.
    0123456789
    RCA
    GE
    PRO
    SC
    A
    N
    Insign
    ia
    JVC
    M
    a
    g
    n
    av
    o
    x
    Phi
    l
    ips
    Pan
    a
    sonic Sa
    m
    sung Sha
    r
    pS
    o
    ny T
    o
    sh
    iba
    V
    i
    zio
    TV
    VCR
    0123456789
    R
    C
    A
    GE
    PROSCAN
    Ap
    e
    x
    JV
    C
    Magnavox
    Phili
    p
    s
    P
    anasonic Pioneer
    Sa
    m
    s
    ung Sh
    arp
    S
    o
    ny
    T
    o
    shi
    b
    a
    DVD
    SAT/CABLE
    0123456789
    R
    C
    A
    G
    E
    P
    ROSCA
    N
    Mo
    torola
    Di
    r
    e
    cT
    V
    D
    is
    h
    Ne
    twork
    Sys
    tem
    s
    /
    Echostar
    G
    ene
    r
    al
    In
    s
    t
    r
    u
    m
    en
    ts
    Hug
    he
    s
    N
    et
    wo
    rk
    Syst
    e
    m
    s
    Scie
    n
    tif
    ic
    At
    l
    ant
    a
    Ma
    g
    na
    v
    o
    x
    Philips
    AM
    NI
    O
    ADB
    P
    a
    n
    a
    s
    onic
    Brand Code
    List/Lista de Códigos de Marcas
    0123456789
    Samsung
    Magnavox
    Philips
    Mi
    t
    subish
    i
    Panasoni
    c
    Sha
    r
    p Sony Tos
    hi
    ba
    R
    CA
    GE
    PRO
    SCAN
    JV
    C
    S
    y
    mp
    h
    oni
    c
    Admiral .................................
    Advent ...........................................
    Ai
    k
    o .
    ..
    ..
    .
    .
    ..
    ....
    ..
    .....
    .
    ....
    ...
    .
    ..
    .
    .
    ...
    ..
    .
    .
    ..
    .
    .
    ..
    ...
    .
    .
    .
    ..
    .
    .
    ..
    Ak
    a
    i ....
    .
    ......
    .
    ......
    .
    ......
    .
    ..
    .1
    0
    8
    12,
    11
    675,
    1
    006
    0
    ,
    1
    Albatron .........................................................
    .
    ....
    .
    ......
    Ameri
    c
    a Action .....
    .
    ...........
    .
    .............................
    .
    ..........
    An
    a
    m
    .
    ..
    ...
    ...
    ...
    .
    .
    .
    ....
    ..
    ...
    .
    .
    .
    ....
    .
    ......
    .
    .................
    .
    ...............
    AO
    C
    .....
    .
    .....
    ..
    .
    .
    ..
    .
    .
    .
    ...
    ..
    .
    .
    ..
    ...
    ...
    ....
    ..
    ....
    ..
    ...
    .
    .
    ..
    ...
    .
    ......
    ..
    ...
    .
    .
    .
    Apex Di
    g
    i
    t
    al ..........
    .
    ....
    .
    .
    .
    ................
    .
    .....
    1
    0156, 107
    Audi
    ovo
    x .
    .
    ....
    .
    .
    .
    ....
    .
    ...........
    ..
    ....
    1
    0451,
    1
    0180, 100
    ..
    .
    ......
    .
    .
    .
    ..
    .
    .
    .
    ....
    .
    .
    .
    ..
    ...
    ....
    ..
    ...
    .
    .
    ..
    ..
    ..
    ....
    ...
    ...
    ...
    .
    .
    1
    0
    875, 1
    Aventur
    a
    ...........................
    .
    ......
    .
    ................
    .
    .....
    Axion .........................................
    .
    .................
    .
    .
    Bell & H
    o
    w
    e
    ll .
    .
    .
    .
    ....
    .
    ....
    .
    .
    .
    ..
    .
    ......
    .
    ......
    ..
    ...
    .
    ......
    ..
    B
    enQ
    ...
    ..
    .
    .
    .
    ...
    ..
    .
    .
    ..
    .
    .
    .
    ...
    ..
    .
    .
    ..
    ....
    ..
    ..
    ..
    .
    .
    ....
    .
    ....
    .
    .
    .
    ....
    .
    Bradf
    o
    rd
    ..
    .
    ..
    .
    ...........
    .
    ......
    .
    ...........
    .
    ....
    .
    .
    .
    ....
    .
    ..
    Broksonic
    .
    .
    ......
    .
    ....
    ..
    ...........
    .
    ......
    .
    ....
    .
    ......
    .
    .
    C
    a
    n
    d
    le .
    .
    ..
    .
    .
    .
    ...
    ..
    ....
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ...
    ..
    .
    .
    ..
    ...
    .
    Carniv
    a
    le .
    .
    ......
    .
    .....
    .
    .....
    .
    .....
    .
    .
    .
    ....
    .
    .
    .
    ..
    .
    .
    .
    ...
    Carver ..................
    .
    .............................
    Celera ..............................................
    Chang
    ho
    ng
    ..
    .....
    ..
    ....
    ..
    ...
    .
    .
    .
    ....
    .
    ....
    .
    .
    .
    ..
    C
    i
    ti
    zen
    .
    ......
    .
    ...
    ..
    ......
    .
    ....
    .
    .
    .
    ....
    .
    ......
    .
    ..
    C
    l
    arion .....
    .
    .....
    .
    ......
    .
    ....
    .
    ......
    .
    .....
    .
    ..
    C
    omme
    r
    ci
    a
    l
    Sol
    u
    ti
    on
    s ..
    .
    .
    .
    ....
    .
    ..
    Co
    n
    c
    erto
    ..
    .
    ........
    .
    ....
    .
    ....
    .
    .
    .
    ....
    .
    ...
    Conte
    c
    .......
    .
    .................
    .
    ......
    .
    .
    Craig ...................................
    C
    r
    osley ........
    .
    ...................
    .
    Cro
    w
    n
    ...
    ..
    .
    .
    ..
    ...
    ....
    ..
    ...
    .
    .
    .
    ....
    Curti
    s
    Ma
    th
    e
    s
    .
    .
    ......
    .
    ....
    .
    .
    .
    ....
    .
    .
    .
    ....
    .
    ......
    .
    ..
    .
    .
    .
    ....
    .
    .
    .
    .....
    .
    .
    ..
    ....
    .
    .
    .
    ....
    .
    .
    .
    ....
    .
    ....
    ...
    ....
    .
    CXC ..
    .
    ...................
    .
    ...
    Cytron ...................
    Daewoo .....
    .
    ........
    D
    el
    l
    .
    .
    ......
    .
    ....
    .
    ......
    .
    Den
    o
    n ....
    .
    .
    .
    ...
    ..
    .
    .
    D
    i
    amond Visio
    Du
    mont
    ..
    ...
    ...
    Durabrand
    .
    Dwin
    ..........
    Dynex ......
    El
    ec
    trog
    r
    a
    E
    l
    e
    ct
    r
    oh
    E
    merso
    ....
    .
    .....
    E
    mpr
    Envi
    ESA
    Fi
    F
    NOTES
    Remember to enter the code for future reference in the box
    provided in the Code Retrieval section of this manual.
    If your brand isn’t listed in the code list, use one of the Code
    Search methods to program the remote control. (Refer to the
    Auto and Manual Code Search methods.)
    If you release the device key any time during the Direct Code
    Entry procedure, the ON•OFF key blinks four times, and
    the process is exited. The last programmed code under the
    device key is retained.
    Test the remote with the device to make sure the device
    key is programmed with the correct code for maximum
    functionality. If some features don’t work, try a different code
    in the list.
    4. When you’ve fi nished entering the fi ve-digit code, keep
    holding down the device key and look at the ON•OFF key.
    Is the ON•OFF key on?
    YES: You’re done! You’ve programmed this device key.
    NO, it blinked four times and turned off: You have
    either entered a code number that is not in the code lists or
    missed a step in the code entry procedure. Try step 3 again.
    Manual Code Search
    The Manual Code Search lets you go one-by-one through all the
    codes for the device you’re trying to control. When you fi nd the
    one that operates your device, you can stop the search and store
    that code.
    TIPS: Each device key is associated with a type of device—the
    TV is preset to search for TVs, SAT•CBL•DTC for satellite
    receivers, cable boxes or digital TV converters (DTC), and
    VCR•DVD for VCRs or DVD players.
    The ON•OFF key serves as an indicator light during
    programming, giving you feedback at each stage of the process.
    The Manual Code Search method may take a long time because
    the remote searches through all of the codes in its memory
    one-by-one. If your brand is listed in the Brand Codes or the
    Code Lists, fi rst try the Brand Code Search or the Direct Code
    Entry method.
    To exit without saving a new code at any point in the Manual
    Code Search, press the GO BACK key.
    1. Manually turn on the device you
    want to control.
    2. If you’re programming the TV or SAT•CBL•DTC key,
    go to step 3.
    If you’re programming the VCR•DVD key, you need to
    tell the remote which kind of device you want this key to
    control, VCR or DVD.
    Press and hold the VCR•DVD key. While you’re holding
    down the VCR•DVD key, use your other hand to press the
    number key for the type of device you want to control with
    this key: 2 for VCR, 3 for DVD.
    4. Wait until the ON•OFF key comes on and stays on. Then
    release both keys.
    5. Point the remote directly at the front panel of the device you
    want to control. Press ON•OFF on the remote and wait 2
    seconds. The remote is testing a single code for your device.
    Did your device turn off?
    YES: Press the STOP key to store
    the code. You’re done! You’ve
    programmed this device key.
    NO: Press ON•OFF again. The
    remote tests the next code for
    your device.
    Keep pressing ON•OFF every 2
    seconds until your device turns back
    on. When it does, press STOP.
    TIP: Because there are so many codes, you may have to press
    the ON•OFF key many times—possibly hundreds of times.
    NOTES
    Throughout the programming of each key, keep the remote
    pointed at the IR sensor of the device you are programming
    the remote to control.
    Test the remote with the device to make sure the device
    key is programmed with the correct code for maximum
    functionality. If some features don’t work, try a different
    code. See the “Testing the Code for Maximum Functionality”
    section below for more information.
    During the Manual Code Search, the remote ignores
    keypresses that aren’t part of the search.
    The search times out after two minutes (the ON•OFF key
    blinks four times and turns off, and the last programmed
    code under that device key is retained).
    The ON•OFF key blinks four times and turns off when the
    remote has gone through all the codes. The remote exits the
    Manual Code Search. If your device hasn’t turned off yet, try
    a different search method.
    Testing the Code for Maximum Functionality
    1. Try a variety of the device’s functions with the remote. If
    some features of your devices don’t work, go to the next
    step to try a different code.
    2. Repeat the Manual Code Search from the beginning. When
    the device turns off for the fi rst time, don’t press the STOP
    key, which would store the same code. Instead, with the
    unit now off, continue to press the
    ON•OFF key repeatedly
    until the unit turns back on.
    3. Once the unit turns back on, you have found another code
    that operates the device. Press the STOP key.
    4. Test the key’s functionality again by trying a variety of
    functions. If the code controls the majority of the device’s
    functions, programming is complete. If the code stored
    does not give maximum functionality, try another code.
    Code Retrieval
    Once you’ve programmed the remote to control your devices,
    you may want to record the codes for future reference. If
    you used the Direct Code Entry method, this is easy. Just
    nd the codes you entered and make a note of them in the
    boxes below. If you used one of the Code Search methods to
    program your remote or if you used the Direct Entry method
    but don’t remember the code, you will need to retrieve each
    device’s fi ve-digit code. Retrieving the actual code and writing
    it down will save you time if you ever need to program the
    remote again (e.g., if programming is lost when you change
    the batteries). If the codes are recorded, you can use the
    Direct Entry method to reprogram your remote to control your
    devices, which is quick and easy.
    1. Press and hold the device key
    (TV, SAT•CBL•DTC, VCR•DVD)
    whose code you wish to retrieve.
    The ON•OFF key turns on. Keep
    pressing the device key.
    IMPORTANT
    Because this remote controls more than one device, you
    must fi rst “tell” the remote which device you wish to
    operate. That means, if you wish to operate your TV, you
    must fi rst press the TV key to put the remote in the TV
    Mode. The remote stays in that device mode until you press
    a different device key. For example, if your remote is in TV
    Mode and you want to operate the DVD player, you must
    press the VCR•DVD key to change device modes.
    Accessing Device Menus and Guides
    Many devices use on-screen menus and guides to help you
    navigate through all their features and programming. While
    this remote may not access every menu or guide system
    of every device model, it does offer some menu and guide
    functionality.
    To use a device’s on-screen menu or guide system, you fi rst
    have to put the remote in Menu or Guide Mode.
    1. Make sure your devices are turned on and your TV is set
    to the correct device input (use the INPUT key to toggle
    through inputs when in TV Mode.)
    2. Press the device key whose menu you want to access.
    4. Use the VOL+/- and CH+/- keys to
    navigate through the on-screen
    menu system or guide. To select the
    highlighted item, press the OK key.
    TIP: If the remote doesn’t respond,
    check to see that the ON•OFF key is
    still blinking. The ON•OFF key times
    out after 20 seconds. If this happens,
    just press the MENU key again, and
    then retry your selection.
    Exiting Menu/Guide Mode
    The remote automatically times out of Menu or Guide Mode
    after 20 seconds of inactivity (no keys being pressed). At that
    time, the remote clears the displayed menu from the TV.
    If you want to exit the Menu Mode yourself, press the
    corresponding device key on the remote (TV, SAT•CBL•DTC,
    VCR•DVD). The ON•OFF key turns off.
    Problem: The remote does not operate your device.
    Make sure the remote is in the correct mode by pressing the
    corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This
    tells the remote which device to operate.
    Remove any obstacles between the remote and the device. Make
    sure you’re aiming the remote at the device’s IR sensor.
    Make sure the batteries are fresh and are properly installed.
    Replace the batteries with two new AA batteries, if necessary
    (see the Battery Installation section).
    Problem: The remote can’t be programmed to operate your
    device.
    If you are testing the remote while programming it, you may be
    too far away from the device or at a wrong angle. There must be
    an unobstructed path between the remote and the IR sensor on
    the device. Move closer and make sure you point the remote at
    the device you’re trying to control.
    If you’re using the Direct Entry programming method to enter
    the codes for your brand and the unit is still not functioning
    properly, try the auto, brand, or manual search method.
    To control combo units, like TV/VCRs or TV/DVDs, you must
    program the individual corresponding device keys to control
    each part of the combo unit. Once programmed successfully, the
    TV key controls the TV functions, and the VCR•DVD key controls
    the VCR or DVD functions.
    Make sure the batteries are fresh and are properly installed.
    Problem: The remote doesn’t perform commands properly.
    Make sure the remote is in the correct mode by pressing the
    corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This
    tells the remote which device to operate.
    Make sure device is ready (for example, the DVD player has a
    disc loaded).
    You may have pressed an invalid key for the mode the remote is in.
    If you’re trying to enter a channel number directly, try pressing
    the ENTER key after entering the channel number as this is a
    requirement of certain models and brands.
    There is a possibility that a programmed code may only be
    able to control some of your device features (for example, only
    turns a device on and off). To confi rm that the device key is
    programmed with the correct code for maximum functionality,
    test the device. Attempt to control a variety of the device’s
    functions with the remote. If some of the features of your
    devices don’t work, try programming the remote with a different
    code in the list using the Direct Code Entry Method, until you
    nd the code that allows the remote to control the majority of
    your device’s functions. Different codes can provide different
    levels of functionality.
    Problem: The ON•OFF key does not light when you press a key.
    You may have pressed an invalid key for the mode the remote is
    in.
    Make sure the remote is in the correct mode by pressing the
    corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This
    tells the remote which device to operate.
    Make sure the batteries are fresh and are properly installed.
    Replace the batteries with two new AA batteries, if necessary
    (see the Battery Installation section).
    Problem: The remote will not change channels on device.
    Make sure the remote is in the correct mode by pressing the
    corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This
    tells the remote which device to operate.
    Press the ENTER key after you enter a channel number.
    Remove any obstacles between the remote and the device. Make
    sure to aim the remote at the IR sensor on the device.
    Problem: The device’s menu does not appear on the TV screen.
    Make sure you have connected the device to your TV properly and
    selected the correct input. (See your devices’ Owner’s Manuals for
    proper connection procedures.)
    Make sure the remote is in the correct mode by pressing the
    corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This
    tells the remote which device to operate.
    Menu access isn’t supported for all brands. You may need to use
    your original remote control to access menu functions for some
    devices.
    For more information, please visit www.rcaaccessories.com
    Consumer Help Line: 1-800-420-7968
    Audiovox Electronics Corporation (the “Company”) warrants to you the
    original retail purchaser of this product that should it, under normal use
    and conditions, be proven defective in material or workmanship during
    its lifetime while you own it, such defect(s) will be repaired or replaced
    (at the Company’s option) without charge for parts and repair labor. To
    obtain repair or replacement within the terms of this Warranty, the product
    is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
    specifi cation of defect(s), transportation prepaid, to the Company at the
    address shown below.
    This Warranty does not cover product purchased, serviced or used outside
    the United States or Canada. This Warranty is not transferable and does
    not extend to costs incurred for installation, removal or reinstallation of
    the product. This Warranty does not apply if in the Company’s opinion,
    the product has been damaged through alteration, improper installation,
    mishandling, misuse, neglect, accident, or the simultaneous use of different
    battery types (e.g. alkaline, standard or rechargeable).
    THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
    LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
    EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE
    PAID BY PURCHASER FOR THE PRODUCT.
    This Warranty is in lieu of all other express warranties or liabilities. ANY
    IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL
    BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL
    THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
    DAMAGES WHATSOEVER. No person or representative is authorized
    to assume for the Company any liability other than expressed herein in
    connection with the sale of this product.
    Some states/provinces do not allow limitations on how long an implied
    warranty lasts or the exclusion or limitation of incidental or consequential
    damage so the above limitations or exclusions may not apply to you. This
    Warranty gives you specifi c legal rights and you may also have other rights,
    which vary from state/province to state/province.
    U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge,
    New York 11788
    CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,
    Unit 3, Door 16, Mississauga, Ontario L5T 3A5
    Trademark(s) ® Registered
    RCR312WR US 06
    ©2010 Audiovox Accessories Corporation
    111 Congressional Blvd., Suite 350
    Carmel, IN 46032
    Step 1: Install your batteries
    Step 2: Program your remote
    Tour of the Remote
    Advanced Functions Troubleshooting
    Limited Lifetime Warranty
    VCR•DVD CODE
    5
    SAT•CBL•DTC CODE
    1
    TV CODE
    SAT CABLE DTV CONVERTER
    DVD VCR
    3. To access menus, press the MENU key. To access guides,
    press the GUIDE key. The ON•OFF key starts blinking,
    indicating you are in Menu or Guide Mode.
    ON•OFF key
    2. If you’re programming the TV or SAT•CBL•DTC key,
    go to step 3.
    If you’re programming the VCR•DVD key, you need to
    tell the remote which kind of device you want this key to
    control, VCR or DVD.
    Press and hold the VCR•DVD key. While you’re holding
    down the VCR•DVD key, use your other hand to press the
    number key for the type of device you want to control with
    this key: 2 for VCR, 3 for DVD.
    2. If you’re programming the TV or SAT•CBL•DTC key,
    go to step 3.
    If you’re programming the VCR•DVD key, you need to
    tell the remote which kind of device you want this key to
    control, VCR or DVD.
    Press and hold the VCR•DVD key. While you’re holding
    down the VCR•DVD key, use your other hand to press the
    number key for the type of device you want to control with
    this key: 2 for VCR, 3 for DVD.
    3. Press and hold the device key you want to program. While
    you’re holding down the device key, use your other hand to
    press and hold the remote’s ON•OFF key at the same time.
    Note: All TV codes begin with the number 1; all VCR and DVR
    codes begin with the number 2; all DVDs, the number 3; and
    all satellite receivers, cable boxes and DTV converters, the
    number 5.
    5. Repeat step 4 until you have retrieved all fi ve numbers in
    the code. After the fi fth number is retrieved, the ON•OFF
    key blinks briefl y, then turns off.
    TIP: To exit the Code Retrieval Mode at any time, press the
    GO BACK key.
    Note: If you press an invalid key during the Code Retrieval
    process, the remote will not respond. If you do not press a
    valid Code Retrieval key (TV, SAT•CBL•DTC, VCR•DVD, INFO,
    GO BACK), Code Retrieval times out after 15 seconds. The
    ON•OFF key blinks four times, and then turns off.
    CH and VOL keys have dual functions: they can act as
    navigation keys in menu systems as well as channel and
    volume controllers outside the menus. The CH keys also
    provide skip forward and skip back control for DVD players and
    DVRs that support this functionality.
    GO BACK exits remote programming; it also performs the
    same functions as on your original remotes
    The INPUT and — (dash) key has three functions: (1) it toggles
    through all the video sources connected to your TV; (2) when
    the remote is in VCR mode, this button toggles between VCR
    and the TV input; (3) when you’re entering digital channel
    numbers directly, this button lets you separate the main
    channel number from the sub-channel number (such as 59.1)
    Backlighting
    Backlight illumination helps you see the remote control keys
    better in the dark. You can turn backlight illumination on or off
    by pressing the backlight key ( ). Backlighting stays on as
    long as keys are being pressed and turns off six seconds after
    the last keypress. Once the backlight time has timed out, any
    keypress will reactivate it. If the backlight illumination is on,
    and you press the backlight key, the backlight turns off.
    2. While holding the device key down, press and hold the
    INFO key. The ON•OFF key turns off. After holding down
    both keys for three seconds, the ON•OFF key turns back
    on.
    3. Release both keys. The ON•OFF key remains on.
    4. Starting with the number 1 key, press and release each
    number key on the keypad in the following order: 1-9, then
    0. The number that causes the ON•OFF key to blink is the
    rst number of the code. As you fi nd each number of the
    code, write it down for future reference.
    TIP: Each device key is associated with a type of device—the TV
    is preset to search for TVs, SAT•CBL•DTC for satellite receivers,
    cable boxes or digital TV converters (DTC), and VCR•DVD for
    VCRs or DVD players.
    The ON•OFF key serves as an indicator light during
    programming, giving you feedback at each stage of the process.
    4. Test the key’s functionality again by attempting to control
    a variety of the device’s functions. If the code that has
    been stored controls the majority of the device’s functions,
    programming is complete. If the code stored does not give
    maximum functionality, try another code.
    Actual model may vary
    from illustration
RCA RCR311BIR

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om RCA RCR311BIR? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av RCA RCR311BIR att svara på din fråga.

Se manualen för RCA RCR311BIR helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 8.1. Den här manualen är tillgänglig på följande språk: Engels. Behöver du hjälp eller har du en fråga om RCA RCR311BIR? Ställ din fråga här

RCA RCR311BIR – specifikationer

Allmänt
Varumärke RCA
Modell RCR311BIR
Produkt Fjärrkontroll
EAN 522536815410, 885417251371, 971485540216
Språk Engels
Filtyp PDF
Prestanda
Antal stödda enheter 3
Maximal räckvidd - m
Design
Gränssnitt IR trådlös
Produktens färg Svart
Korrekt användning av fjärrkontroll DVD/Blu-ray,TV,VCR
Ingångssignal Tryckknappar
Display
Inbyggd display Nej
Vikt & dimension
Vikt - g
Batteri
Uppladdningsbara Nej
Batteriteknik -

Vanliga frågor

Nedan hittar du de vanligaste frågorna om RCA RCR311BIR .

Är din fråga inte listad? Ställ din fråga här

Bruksanvisni.ng

Letar du efter en manual? Bruksanvisni.ng säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

Bruksanvisni.ng

© Copyright 2021 Bruksanvisni.ng. All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer