Silva Schneider Exceed 2XT bruksanvisning

Silva Schneider Exceed 2XT
(1)
  • Sidantal: 2
  • Filtyp: PDF
Visit: www.silva/enviroment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.
SILVA EXCEED 2 AND FLOW LIGHT
Thank you for choosing Silva Exceed 2 headlamp. This headlamp can, thanks to the modular
design, also be used on a helmet or a bike handle bar.
Exceed 2 is equipped with Flow Light which is a light distribution technology that combines
a wide-angle flood light with a long reach spot light. If you aim the light beam of the Exceed 2
close to your feet by rotating the light body downward, the light image will be a wide flood light
adapted for slower activities. If you aim the light higher up, further away, the light image will
gradually transform into a long-distance spot beam, perfect for higher speed.
This unique feature gives the user peripheral or long distance vision depending on the activ-
ity or speed. For a runner, cross country skier, mountain biker or night orienteer this translates
into less head movement, increased control, better balance and more speed
PRODUCT OVERVIEW
The Exceed 2 packaging contains the following parts:
Headlamp unit
Ergonomic head set.
Rechargeable Li-ion battery (Exceed 2X & 2XT only)
Extension cord
Helmet attachment
Bike handle bar attachment
Quick guide
Storing case
USB charging cable (Exceed 2X &Exceed 2XT only)
USB charger (Exceed 2XT only)
BEFORE USE
BATTERY CHARGING (EXCEED 2X & EXCEED 2XT)
The battery needs to be charged before first use.
1. Connect the battery to the charger or other USB port with the included cable.
2. Connect the charger to the wall outlet.
3. On the battery, there are 5 LEDs showing battery status during charging:
Green light (all 5 LEDs) = battery is fully charged
Red light blinking = battery is charging
Note! When the battery is fully charged the charger automatically switches to maintenance
mode.
Exceed 2 is compatible with all Silva batteries with the same connector as on Exceed 2 battery.
Note that the battery indication may not be accurate with other Silva batteries.
SILVA EXCEED 2 THE FLEXIBLE, MODULAR HEADLAMP
Exceed 2 is designed for Multi-activity Sports. Here is a description of the different options:
ERGONOMIC HEADSET
The head set is ergonomically shaped to give comfortable fit. Use the 2 buckle adjustments to
fit it perfectly to your head. Removable top band included.
Attach the headlamp in the head bracket by sliding the headlamp foot into the snap-in socket.
To remove, slide the headlamp up and out of the bracket.
BIKE HANDLEBAR ATTACHMENT
The bike handle bar attachment is developed for use on bike handlebars with a dimension
between 22 mm and 32 mm. The bike bracket is attached to the handle bar by wrapping the
rubber strap around the handlebar and fasten it on the plastic hook.
Attach the headlamp in the bike handle bar attachment by sliding the headlamp bracket into
the snap-in socket.
To remove, slide the headlamp up and out of the bracket.
HELMET ATTACHMENT
The helmet attachment comes with pre-mounted adhesive tape on the back for easy mounting
on any helmet.
To mount the helmet attachment, remove the protective film covering the adhesive tape.
Make sure the surface of the helmet is clean and dry. Press the bracket onto its correct posi-
tion.
If you do not want to use the adhesive on your helmet the attachment is prepared for mount-
ing with 2 or more straps on the sides. (Not included)
Attach the headlamp in the helmet attachment by sliding the headlamp bracket into the
snap-in socket.
To remove, slide the headlamp up and out of the bracket.
FLEXIBLE BATTERY CARRYING
The Exceed 2 headlamp is designed so that the battery can be carried in multiple ways. For
example, in a battery carrier on your back, on the bike frame, on your belt, backpack or on the
back of your head unit etc.
DURING USE
SWITCH ON YOUR HEADLAMP
A push button is located on the left side of the headlamp body. This button controls all light modes.
To start the headlamp with Flow Light activated press push button with a short press.
To start the headlamp with Flow Light de-activated press and hold push button for 1 second
To cycle between the different modes use short presses.
To turn the headlamp off press and hold button for 1 second
MAX

SHORT PRESS LONG PRESS

OFF

OFF OFF OFF

MED MIN BLINK

FLOW LIGHT ACTIVATED

FLOW LIGHT DEACTIVATED

BOOST MODE
Exceed 2 has a Boost mode that temporarily increases the light output to 2000 lumens during
10 seconds.
To enter Boost mode, do as follows:
Turn headlamp ON (with Flow light activated or de-activated)
Keep push button pressed until headlamp turns OFF and keep pressing the push button
until the headlamp turns back ON.
Headlamp has now entered Boost mode
The light will remain in Boost mode for 10 seconds and then return to the light mode from
where you entered Boost mode (for example MED)
Note! During the 10 seconds the headlamp is in Boost mode it is not possible to use push button.
TEMPERATURE CONTROL
Note that the headlamp body temperature will increase during use. The headlamp tempera-
ture is depending on light mode, ambient air temperature and the airflow (speed). Exceed 2 is
equipped with a temperature control unit that prevents the headlamp body from overheating by
reducing the power to the LEDs.
Note! Always make sure to disconnect the battery when the headlamp is stored in a closed
compartment such as in a bag, pocket or similar.
LOW BATTERY WARNING
During operation of the headlamp there will be a low battery warning when 25% of the battery
time remains. This is done by flashing LEDs for 1 second 2 times with 5 second interval.
When 15% remains the LEDs will flash 1 time.
RESERVE MODE
During operation, the lamp will go into reserve mode when there is 15% power left of the bat-
tery. All LEDs will flash once before the lamp goes into this mode.
Reserve mode can be overridden by pressing the button.
Warning: If you have pressed the button when headlamp is in reserve mode no more low bat-
tery warnings will appear before the headlamp turns OFF.
BATTERY STATUS INDICATION (EXCEED 2X & EXCEED 2XT)
On the battery, there is a push button that activates battery indication LEDs. When pushing the
button 5 LEDs on the battery shows battery status according the following
5 green LEDs = Fully charged
4 greed LEDs = 80% of the battery remains
3 greed LEDs = 60% of the battery remains
2 greed LEDs = 40% of the battery remains
1 red LED = 20% of the battery remains

FULL VERSION MANUAL

EXCEED 2

EXCEED 2X: Art.no 37634
EXCEED 2XT: Art.no 37635
LIMITLESS EXCEED 2: Art.no 37636
EXCEED 2X EXCEED 2XT / LIMITLESS EXCEED 2
Silva Schneider Exceed 2XT

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Silva Schneider Exceed 2XT? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Silva Schneider Exceed 2XT att svara på din fråga.

Se manualen för Silva Schneider Exceed 2XT helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 8.8. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Silva Schneider Exceed 2XT? Ställ din fråga här

Silva Schneider Exceed 2XT – specifikationer

Lita på beprövad, pålitlig teknik när prestanda är din prioritet. Med den cylindriska litiumjonbattericellen får din bär...
Allmänt
Varumärke Silva Schneider
Modell Exceed 2XT
Produkt Ficklampa
EAN 7318860197970
Språk Engelsk
Filtyp PDF
Design
Ficklampstyp Pannbandsficklampa
Material, hölje Acrylonitrile butadiene styrene (ABS),Aluminium,Thermoplastic urethane (TPU)
Produktens färg Svart
Vattentät Ja
Internationellt skydd (IP) kod IPX5
Strömtillförsel
Batterityp Inbyggd
Batteriteknik Litium-Ion (Li-Ion)
Antal batterier 1
Batterikapacitet 9900 mAh
Batterispänning 7.4 V
Batterinivåindikator Ja
Laddningstid 10 h
Drifttid för batteri 60 h
Laddningskälla USB
Ljus
Lamptyp LED
Antal lampor 3 lamp(or)
Ljuskäglans avstånd (max) 175 m
Ljuskäglans avstånd (min) 40 m
Antal spänningsnivåer 3
Ljusets uteffekt (min) 80 LM
Ljusets uteffekt (max) 2000 LM
Antal ljuslägen 4
Vikt & dimension
Vikt 149 g
Förpackning
Antal per förpackning 1 styck
Förpackningstyp Låda
Förpackningens innehåll
USB-laddare medföljer Ja
Kabel inkluderad USB
Bruksanvisning Ja
Antal batterier medföljer 1 styck
Batterier medföljer Ja
visa mer

Vanliga frågor

Nedan hittar du de vanligaste frågorna om Silva Schneider Exceed 2XT .

Är din fråga inte listad? Ställ din fråga här