Silverstone CP05-SAS

Silverstone CP05-SAS bruksanvisning

  • Warranty Information
    This product has a limited 1 year warranty in North America, Europe, and Australia.
    For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
    1. Product component defects or damages resulted from defective production is covered under warranty.
    Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
    a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
    b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
    c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
    d) Warranty mark/stickers are not removed or broken.
    Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
    2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
    shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
    3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
    Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
    profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
    contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
    4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
    5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
    6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
    Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
    (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
    (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
    Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
    Please visit for the latest updates.
    Warranty terms & conditions
    Additional info & contacts
    For North America (
    SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
    Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent
    back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
    in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.
    For Australia only (
    Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
    You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
    You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
    Please refer to above “Warranty terms & conditions” for further warranty details.
    SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
    (standard international call charges apply)
    For Europe (
    For all other regions (
    Issue date: May, 2012
    NO: G11216020
    1. Connect the power connector and the SAS connector onto CP05-SAS’s IC board.
    Refer to the above diagram:
    For SAS hard drives, connect the SAS connector to either Channel-1 or Channel-2,
    we recommend you to connect both.
    For SATA hard drives, connect the SATA connector to Channel-1,
    use only the 180° SATA connectors.
    2. Secure the CP05-SAS onto the chassis.
    Installation guide
    1. Подключите разъем питания и разъем SAS к печатной плате CP05-SAS.
    См схему выше:
    В случае жесткого диска SAS, подключите разъем SAS к каналу-1 или каналу-2.
    Мы рекомендуем выполнить подключение к обеим.
    В случае жесткого диска SATA, подключить разъем SATA к каналу-1.
    Используйте только разъемы 180° SATA.
    2. Закрепите CP05-SAS на корпусе.
    1. Verbinden Sie Netz- und SAS-Anschluss mit der IC-Platine des CP05-SAS.
    Beachten Sie das obigen Diagramm:
    Bei SAS-Festplatten verbinden Sie den SAS-Anschluss entweder mit Kanal 1 oder Kanal 2;
    wir empfehlen die Verbindung beider Kanäle.
    Bei SATA-Festplatten verbinden Sie den SATA-Anschluss mit Kanal 1;
    verwenden Sie nur 180 °-SATA-Anschlüsse.
    2. Sichern Sie das CP05-SAS am Gehäuse.
    1. Connectez le connecteur d'alimentation et le connecteur SAS sur la carte IC du CP05-SAS.
    Référez-vous au diagramme ci-dessus:
    Pour les disques durs SAS, connectez le connecteur SAS au Canal-1 ou au Canal-2,
    nous vous recommandons de connecter les deux.
    Pour les disques durs SATA, connectez le connecteur SATA au Canal-1,
    utilisez uniquement les connecteurs SATA 180°.
    2. Attachez le CP05-SAS sur le châssis.
    1. Enchufa el conector de potencia en la clavija SAS en la placa CP05-SAS.
    Consulta el diagrama arriba:
    Para discos duros SAS, enchufa el conector SAS bien en el Canal-1 ó el Canal-2,
    le recomendamos que conecte ambos.
    Para discos duros SATA, enchufe el conector SATA al Canal-1,
    use solo los conectores SATA de 180º.
    2. Fije el CP05-SAS en el chasis.
    1. Collegare il connettore d’alimentazione ed il connettore SAS sulla scheda IC di CP05-SAS.
    Fare riferimento allo schema sopra:
    Per i dischi rigidi SAS, collegare il connettore SAS a Channel-1 o Channel-2,
    si raccomanda di collegare entrambi.
    Per i dischi rigidi SATA, collegare il connettore SATA a Channel-1,
    usare solo connettori SATA 180°.
    2. Fissare CP05-SAS al telaio.
    1. 전원 커넥터와 SAS 커넥터를 CP05-SAS의 IC 보드에 연결합니다.
    위의 다이어그램을 참조하십시오.
    SAS 하드 드라이브의 경우 SAS 커넥터를 채널 1 또는 채널 2에 연결해도 되나,
    둘 다 연결할 것을 권장합니다.
    SATA 하드 드라이브의 경우 SATA 커넥터를 채널 1에 연결합니다.
    이 경우 180° SATA 커넥터만 사용하십시오.
    2. CP05-SAS를 섀시에 고정합니다.
    1. CP05-SASのICボード上に、電力コネクタおよびSASコネクタを接続します。
    2. CP05-SASをケースに固定します。
    1. 先將電源線與硬碟排線插上CP05-SAS的電路板。
    SATA硬碟,請將硬碟排線接上Channel-1, SATA排線限定使用180度的。
    2. 再將CP05-SAS鎖上機殼。
    1. 先将电源线与硬盘排线插上CP05-SAS的电路板。
    SATA硬盘,请将硬盘排线接上Channel-1, SATA排线限定使用180度的。
    2. 再将CP05-SAS锁上机壳。
Silverstone CP05-SAS

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Silverstone CP05-SAS? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Silverstone CP05-SAS att svara på din fråga.

Se manualen för Silverstone CP05-SAS helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 8.5. Den här manualen är tillgänglig på följande språk: Engelsk, Tyska, Franska, Spanska, Italiensk, Ryska, Kinesisk. Behöver du hjälp eller har du en fråga om Silverstone CP05-SAS? Ställ din fråga här

Silverstone CP05-SAS – specifikationer

Varumärke Silverstone
Modell CP05-SAS
Produkt Dator box
EAN 4710713969148
Språk Engelsk, Tyska, Franska, Spanska, Italiensk, Ryska, Kinesisk
Filtyp PDF
Modell Cable management kit
Kompatibel typ av chassi -
Produktens färg Svart
Kompatibla produkter TJ11, KL01, KL02, KL03, FT01, FT02, RV01, RV02-E
Antal per förpackning 1

Letar du efter en manual? säkerställer att du hittar manualen som du letar efter på nolltid. Vår databas innehåller mer än 1 miljon PDF-manualer från över 10 000 märken. Varje dag lägger vi till de senaste manualerna så att du alltid hittar produkten du letar efter. Det är väldigt enkelt: ange bara märket och typen av produkt i sökrutan för att omedelbart semanualen du önskar online helt gratis.

© Copyright 2020 All Rights Reserved.

Vi använder cookies för att se till att vi ger dig den bästa upplevelsen på vår hemsida. Om du fortsätter att använda den här webbplatsen kommer vi att anta att du godkänner detta.

Läs mer