Sony KD-36NX200U bruksanvisning

Här kan du se manualen för Sony KD-36NX200U gratis. Har du läst manualen utan att den ger svar på din fråga? Ställ då din fråga till andra ägare av Sony KD-36NX200U på denna sida.

1
GUIDE
0
4
6
7
8
9
1
2
3
5
D
IG
IT
A
L
M
EM
ORY
S
T
IC
K
MODE
INDEX
PROG
MENU
VIDEO
TV
/
/
VTR
T
V
D
V
D
Quick Start Guide
4-090-228-01
Checking the supplied
accessories
Inserting batteries into
the remote control
Connecting the TV
2
Remote Control
Connecting an aerial only
Connecting an aerial and VCR
KD-32NX200U
Thank you for choosing this Sony
Trinitron Television.
This step by step guide will help you to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Switch on your TV.
Tune your TV.
View TV programmes.
1
3
KD-36NX200U
Batteries
RF Loopthrough cable
3
2
Place a coin in the slot at the
bottom of the remote control.
Turn anti clockwise to release
the battery compartment.
Insert the batteries as
indicated in the battery
compartment.
Replace the battery compartment
and lock in place by twisting the
coin clockwise in the slot.
Always remember to dispose of batteries in an environmentally friendly way.
R/D/D/D
L/G/S/I
ANALOGUE
1
2
DVD
VCR
s
3
3
(SMARTLINK)
DIGITAL
OPTICAL OUTPUT
MODEM
. . .
5V 200mA
Existing
aerial lead
RF loopthrough
cable (supplied)
Scart lead
(not supplied)
RF lead
(not supplied)
1.
Connect your existing aerial lead to the digital socket marked on the rear of
the TV as shown.
2.
Connect the supplied RF loopthrough cable from the socket marked to the
analogue socket marked .
1.
Connect your existing aerial lead to the digital socket marked on the rear of the
TV as shown.
2.
Connect the supplied RF loopthrough cable from the lower socket marked on
the TV to the RF IN socket on your VCR.
3.
Connect a lead from the RF OUT socket of your VCR to the analogue socket
marked on the TV.
4.
Connect a scart lead from the socket marked on the rear of the TV to
the scart socket on your VCR (refer to your VCR instruction manual).
5.
Connect the VCR to the mains socket and switch on.
6.
Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables
the TV to locate and store the video channel during the ‘Automatically tuning the
TV’ procedure.
s
3
3
VCR

Har du en fråga om Sony KD-36NX200U?

Ställ frågan du har om Sony KD-36NX200U till andra produktägare. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju bättre problemet och frågan beskrivs, desto enklare är det för andra SonyKD-36NX200U-ägare att ge dig ett bra svar.