Sony KV-29FX64K bruksanvisning

Sony KV-29FX64K

Till höger hittar du din Sony KV-29FX64K bruksanvisning. Tjänsten är helt gratis.

Varumärke
Sony
Modell
KV-29FX64K
Produkt
Språk
Engelsk, Polska, Ryska, Slovakien, Ungerska
Filtyp
PDF
Webbplats
http://www.sony.com/
5
GB
9 Recording button: If Media Selector is switched on VCR, press this button to record programmes.
Media Selector:
With this remote control you can operate not only this TV but also the main functions of your VCR or DVD.
Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or
DVD. A green light will be lit momentarily.
Before the first time you want to control a DVD or VCR by using this remote control, you have to set
up it depending the brand of the device to be used. For more details, refer to chapter “Remote Control
Configuration for VCR or DVD” on page 20.
Selecting channels: Press this button to select the next or previous broadcast channel.
!™ Muting the Sound: Press this button to mute TV sound. Press again to restore the sound.
Adjusting TV volume: Press this button to adjust the volume of the TV.
Displaying the menu system: Press this button to display the menu on the TV screen. Press again to
remove the menu display from the TV screen.
!∞ Selecting TV mode: Press this button to switch off teletext or video input.
Selecting Sound effect: Press this button repeatedly to change the sound effect.
Selecting Picture mode: Press this button repeatedly to change the picture mode.
!• Displaying on Screen information: Press this button to display all on-screen indications. Press again
to cancel.
VCR or DVD on/off: Press this button to switch your VCR or DVD on or off.
1 To Temporarily Switch Off TV:
Press this button to temporarily switch off TV (the standby indicator on
TV lights up). Press again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use.
After 15 minutes without a signal and without any button being
pressed, the TV switches automatically into standby mode.
2 Selecting input source: Press this button repeatedly until the desired
input symbol of the source appears on the TV screen.
3 Selecting channels:
If Media Selector is switched on TV or VCR, press this button to select
channels.
For double-digit programme numbers, enter the second digit within 2.5
seconds.
4 a) If Media Selector button is switched on TV:
Press this button to watch the last channel selected (watched for at
least 5 seconds).
b) If Media Selector button is switched on VCR:
For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- -
first and then the buttons 2 and 3.
5 This button only works in Teletext mode.
6 Selecting screen format: Press this button to view programmes in 16:9
mode. Press again to return to 4:3 mode.
7 Selecting Teletext: Press this button to switch on teletext.
8 a) If Media Selector is switched on TV:
When MENU is switched on, use these buttons to operate the menu
system. For details refer to “Introducing and Using the Menu System”
on page 9.
When MENU is switched off, press OK to show a channel overview.
Then press or to select the channel and then press again the OK
button to watch the selected channel.
b)If Media Selector button is switched on VCR or DVD:
Using these buttons you can control the main functions of your VCR or
DVD.
Overview of Remote Control Buttons
Overview
Besides TV functions, all coloured buttons as well as green symbols are also used for
Teletext operation. For more details, please refer to “Teletext” section of this instruction manual.
1
2
!•
!∞
!™
4
6
7
8
5
9
3

Har du en fråga om Sony KV-29FX64K?

Om du har en fråga angående Sony KV-29FX64K, tveka inte att fråga. Förklara noggrant ditt problem så kan andra användare hjälpa dig.

Köp på