takeMS MEM-P3 Player passion bruksanvisning

takeMS MEM-P3 Player passion
(1)
  • Sidantal: 20
  • Filtyp: PDF
It starts counting from the time no button is pressed and ends Shutting down the player to save power.
Figure 0 indicates that this function is off.
“Sleeping Mode” means: One can set such a time (minutes) that whatever mode the player is under, it
starts counting from the time no button is pressed and ends shutting down the player. This function is
designed for listening to music before going to sleep. Attention: Once “sleeping Mode” is set, it only works
once and eliminates the set time automatically. It needs to be set again if necessary.
“A-B” segment replay setup
operation according to “music mode”
Note
For operations please refer to “Sounds Effect Mode” setup. Notes: “Manual Mode” means
there is no stop when repeating. A-B unless a stop point is set manually. “Automatic Mode”
means there are automatic stops when repeating A-B (For English recitation without music)
Contrast adjustment setup.
For operations please refer to “Background light time” set up.
“Connecting with a PC”
For operations please refer to “Sound Effect Mode” setup. Some operational system (versions before
Windows 2k Sp4) can not support one USB disc with two drive letters. Therefore , after using this “strange
space” . It need to choose “single common disk ” or “single coded disk” in order that the chosen disk can
be shown after the player is connected to a PC
“Saving Conditions”
The number here indicates the total capacity of the disk while the Percentage indicates how much space has
been used.
“Version of Firmware”
Here one can check the current version of the players firmware.
“Firmware Update”
This is designed for updating the interface of the firm ware. It is necessary to enter this interface before
updating firmware .The update program is only available for our service center.
Technical tips: Press Mode to finish setting then press Play to exit, the menu quickly. The quick exit function
of button Play can be applied to all menus.
Use USB disk:
This player is equipped with the standard USB disk function, supporting Windows98 (drive program
needed),Windows 2k(no drive program needed )and above ,Mac OS 10.3 and above, and finally Linux Red
hat 8.0 and above.
This player supports electrically supply from USB and can play without battery. Under “Waiting Mode” please
press Mode to exit the main menu, then choose a mode needed to enter.
This player supports Suspend Mode.
How to connect to PC? Please turn on this player, then insert USB cable, this player will enter the following
mode 1.
takeMS MEM-P3 Player passion

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om takeMS MEM-P3 Player passion? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av takeMS MEM-P3 Player passion att svara på din fråga.

takeMS MEM-P3 Player passion – specifikationer

Allmänt
Varumärke takeMS
Modell MEM-P3 Player passion
Produkt Mp3 -spelare
EAN 4045405314228, 4045405324784, 4045405324821, 4045405324838, 4045405324845, 4045405324852
Språk Engelsk
Filtyp PDF
Lagringsmedia
Total lagringskapacitet 8 GB
Spelarens stödda mediatyper Flash minne
Audio
Equalizer Ja
Equalizer tonkontroller 7
File formats
Ljudformat som stöds MP1,MP3,WMA
Record modes
Inspelning Ja
Radio
FM-radio Ja
Anslutningar
Antal USB 2.0 anslutningar 1
Display
Displaytyp OLED
Upplösning 128 x 64 pixlar
Design
Produktens färg Violett
Strömtillförsel
Uppspelningstid 6 h
Övrigt
USB-ström Ja
Vikt & dimension
Vikt 26 g
Djup 8 mm
Höjd 75 mm
Bredd 32 mm
visa mer

Vanliga frågor

Nedan hittar du de vanligaste frågorna om takeMS MEM-P3 Player passion .

Är din fråga inte listad? Ställ din fråga här