Uniden UH15-3 bruksanvisning

Uniden UH15-3
(1)
  • Sidantal: 1
  • Filtyp: PDF
15141312
111098
7654
321
© 2021 Uniden Australia Pty Limited. Printed in PRC.
UNIDEN AUSTRALIA PTY LTD
Phone: 1300 366 895
Email: custservice@uniden.com.au
Procedure for obtaining warranty service: Depending on the country in
which the Product was first purchased, if you believe that your Product does
not conform with this warranty, you should deliver the Product, together with
satisfactory evidence of your original purchase (such as a legible copy of
the sales docket) to Uniden at the address shown below. You should contact
Uniden regarding any compensation that may be payable for your expenses
incurred in making a warranty claim. Prior to delivery, we recommend that you
make a backup copy of any phone numbers, images or other data stored on
your Product, in case it is lost or damaged during warranty service.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable
loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
This warranty is in addition to and sits alongside your rights under either the
COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER
GUARANTEES ACT (New Zealand) as the case may be, none of which can be
excluded.
Statement of Remedy: If the Product is found not to conform to this warranty
as stated above, the Warrantor, at its discretion, will either repair the defect or
replace the Product without any charge for parts or service. This warranty does
not include any reimbursement or payment of any consequential damages
claimed to arise from a Products failure to comply with the warranty.
IMPORTANT: Satisfactory evidence of the original purchase is required
for warranty service
Please refer to our Uniden website for any details or warranty durations offered in
addition to those contained below.
Warrantor: The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498
(“Uniden“) .
Terms of Warranty: Uniden Aust warrants to the original retail purchaser only
that the UH15 Series (“the Product”), will be free from defects in materials and
craftsmanship for the duration of the warranty period, subject to the limitations and
exclusions set out below.
Warranty period: This warranty to the original retail purchaser is only valid in the
original country of purchase for a Product first purchased either in Australia or New
Zealand and will expire one (1) year from the date of the original retail sale.
If a warranty claim is made, this warranty will not apply if the Product is
found by
Uniden to be:
(A) Damaged or not maintained in a reasonable manner or as recommended
in the relevant Uniden Owner’s Manual;
(B)
Modified, altered or used as part of any conversion kits, subassemblies or
any configurations not sold by Uniden;
(C) Improperly installed contrary to instructions contained in the relevant
Owner’s Manual
(D) Repaired by someone other than an authorized Uniden Repair Agent in
relation to a defect or malfunction covered by this warranty; or
(E) Used in conjunction with any equipment, parts or a system not
manufactured by Uniden.
Parts Covered: This warranty covers the Product and included accessories.
User-generated Data: This warranty does not cover any claimed loss of or
damage to user-generated data (including but without limitation phone numbers,
addresses and images) that may be stored on your Product.
UHF CB Transceiver SeriesUNIDEN UH15

WARRANTY

CTCSS Codes 01 - 38
Code
No
Frequency
(Hz)
Code
No
Frequency
(Hz)
Code
No
Frequency
(Hz)
Code
No
Frequency
(Hz)
1 67
71.9
74.4
77
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100
103.5
107.2
110.9
114.8
118.8
123
127.3
131.8
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
21
22
23
24
25
26
27
31
32
33
34
35
36
37
28 38
29
10 20 30
WATER WARNING
Uniden does not represent this product to be waterproof.
Do not expose this product to Rain or Moisture.
User License Information
NOTE
USER LICENSE INFORMATION
The citizen band radio service is licenced in Australia by ACMA
Radio-communications (Citizen Band Radio Stations) Class
Licence and in New Zealand by MBIE General User Licence
for Citizen Band Radio and operation is subject to conditions
contained in those licenses.
NOTE
Always listen on a channel (or observe the receive signal level
meter) to ensure it is not already being used before transmitting.
Channels 5 and 35 are used for emergency channels.
CTCSS will not operate on these channels.
Please follow these guidelines for channel use in Australia:
• Channels 05 and 35 are Emergency Channels.
• Channel 11 is a Calling Channel.
• Channels 22 and 23 are for telemetry and telecommand
applications, channels 61, 62 and 63 are for future use and TX is
inhibited on these channels.
General communication is accepted on all other channels
with these guidelines:
• Channel 40 - road channel (Australia).
• Channels 01-08 (and 31-38), and Channels 41-48
(and 71-78) are repeater channels.
NOTE
Important information - 80 Channel UHF-CB channel expansion
To provide all users additional channel capacity within the UHF-CB
Band. The ACMA will change the majority of the current wideband 40
channel use to narrowband channel use. This allows for additional
channels to be added, up to 80 Channels.
This simply means that the new narrowband radio you have purchased
will have more channels than older radios. Please refer to the guidelines
above and the channel chart for further channel information.
A list of currently authorised channels can also be obtained from the
ACMA website in Australia and the MBIE website in New Zealand.
Interference / Poor Audio
When a new narrowband radio receives a signal from an older
wideband radio the speech may sound loud.
Narrowband radios operating on CH41 - CH80 may encounter
interference from a nearby wideband radios transmitting on high
power on an adjacent channel (frequency).
When an older wideband radio receives a signal from a new
narrowband radio the speech may sound quiet - the wideband radio
user simply adjusts their radio volume for best performance.
The above situations are not a fault of the radio but a symptom of mixed
wideband and narrowband radios in current use. It is expected that as
older wideband radios are phased out this issue will be eliminated.

UHF CHANNELS & FREQUENCIES

Key Lock ON/OFF
1. To lock the key pad:
Press and hold until the key lock indicator appears.
2. To unlock the key pad:
Press and hold until the key lock indicator disppears.
Key Beep ON/OFF
Press and hold the DOWN button while turning the radio ON to
switch the keypad tone ON or OFF.
Roger Beep ON/OFF
Press and hold the UP button while turning the radio ON to turn
Roger Beep ON or OFF.
1. Press MENU seven times. ‘r P’ setting flashes.
2. Press UP or DOWN to change the change the setting ON or OFF.
3. Press PTT to save.
Eg. CH01 is being used in your area for repeater use.
Operation With the Aid of a Repeater
NOTE: You can only activate Duplex on Channels 01-08 and
41-48. When Duplex is ON for a repeater channel, the display
shows r1-r8 for Channels 01-08 and n1-n8 for Channels 41-48.
To Operate in Duplex Mode (Repeater Mode)
The Duplex function enables you to access local repeater
stations. UHF CB Repeaters are used to retransmit or relay your
signal. Repeaters will extend the range of your radio and
overcome the shielding effect caused by solid obstructions.
Dual (Channel) Watch
You can monitor a second channel along with the current
channel with this setting.
1. Press MENU five times. ‘CH’ appears on the display.
The second channel to monitor will flash. (OF, 01 - 80)
If the setting is OF, then Dual Watch is disabled.
2. Press UP or DOWN to set the 2nd channel to monitor.
3. Press PTT to save the setting and dual watch will be enabled.
The second channel will be monitored intermittently.
3 = High Sensitivity (for noisy areas)
2 = Medium Sensitivity
1 = Low Sensitivity (for quieter areas)
oF = Turn Off VOX function
Voice Operated Transmission (VOX)
Transmission is initiated by speaking into the microphone of the
radio instead of pushing the PTT button. To activate VOX:
1. Press MENU four times. appears on the display.
The current setting (oF, 1-3) will flash.
2. Press UP and DOWN button to select the sensitivity level.
3. Press PTT to set the new setting.
Setting and Transmitting Call Tones
Your radio can transmit different call tones (wake-up tone) to
other radios in your group so you can alert them that you want to
talk. To set a call tone:
1. Press the MENU three times. ‘CA’ appears on the display.
The current call tone setting flashes.
2. Press UP or DOWN to change and hear the next call tone.
There are 10 call tones to choose from (1-10)
NOTE: Set the call tone to 0 to disable the call tone feature.
3. Press PTT to set the new call tone.
Press CALL to transmit the call tone.
NOTE: Current regulations require calling tones to be restricted
to one transmission per minute. If a second transmission is
attempted within one minute then an error tone will sound.
Scan Advance
If the radio stops scanning on a channel you do not want to listen
to, briefly press and release UP or DOWN to resume scanning
for the next active channel.
Scanning Channels
Use scanning to monitor channels for transmissions or to find
someone in your group who has accidentally changed channels.
To start scanning:
1. Press and release SCAN. The indicator displays.
2. Press and release SCAN again to disable scanning.
The indicator disappears.
When the radio detects channel activity, it stops scanning and
you can hear the transmission. To respond to the transmission,
press PTT within 5 seconds,the channel will be confirmed.
CTCSS (Privacy) Codes
CTCSS is a feature that allows a group to talk to each other
without hearing other users on the same channel. The radios in
your group must be set to the same CTCSS code. There are 38
codes to choose from. You can set a different code for each
channel using this procedure.
1. Set a desired channel to use CTCSS on (example CH 01).
2. Press MENU two times. The code number flashes.
3. Press UP or DOWN to select a code from 01 to 38.
Example shows Channel 01
with a CTCSS code of 38.
Set to 00 to disable the feature.
4. Press PTT to save the code setting.
NOTE: Set the CTCSS Code to 00 if you want to communicate
with another radio which is not using CTCSS.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the
radio emits a continuous warning tone and stops transmitting if
you press PTT for 60 continuous seconds.
Checking the Channel Before Transmitting
For uninterrupted communication, do not talk on a channel if
someone else is currently talking on it.
To check for activity on a channel before you talk, press and
hold MON. If you hear static, the channel is clear to use.
NOTE
For maximum range and extended the life of the
batteries, avoid touching the antenna with your
hand when transmitting.
Talking and Listening
To communicate, all radios in your group must be set to the
same Channel (and the same CTCSS Code if it is set).
To talk, press and hold PTT. The transmit power is 0.5 Watt.
Hold the radio 5 to 7 cm away from your mouth when speaking.
When you are finished speaking, release PTT to listen.
1 = High receive Sensitivity (weak signal area)
2~5 = Medium receive Sensitivity
6 = Low receive Sensitivity (strong signal area)
Setting the SQUELCH Level 1-6
The squelch mutes the speaker audio unless a strong enough
signal is present. The level is preset to a medium setting and can
be adjusted if needed.
1. Press MENU six times.
‘SL’ appears on the display.
The current setting (1-6) will flash.
2. Press UP or DOWN to select the receive sensitivity level.
Setting a Channel
The UH15 uses the UHF-CB channels (CH01-CH80). See UHF
CHANNELS & FREQUENCIES, page 12 for channel usage.
1. Press MENU one time. The current channel flashes.
2. Press UP or DOWN button to select a desired channel.
3. Press PTT to confirm and save the channel setting.
Open the MENU - Press MENU
Step through MENU - Press MENU again
Exit the MENU - Press PTT
One CHANNEL setting
Two CTCSS Code setting
Three Call Tone setting
Four VOX setting
Five Dual Watch (2nd Channel) setting
Six Squelch Level setting
Seven Duplex Mode (Repeater) setting
MENU List
Ex. lowest
volume
Ex. highest
volume
Setting the Volume
Press the UP button to increase the speaker volume.
Press the DOWN button to decrease the speaker volume.
The speaker volume setting is indicated by ‘UL’.
The volume level range is from 1 (minimum) to 16 (maximum).
Turning Your Radio On and Off
Press and hold to turn the radio On or Off.
When turning on, the radio chirps and the display briefly shows
all the display icons before showing the current standby mode of
your radio.

OPERATION

Back Light
The UH15 has an automatic display back light which remains on
for 3 seconds after a key press (all keys except PTT key). The
back light will work even if the keypad is locked but will not work
during low battery alert mode.
Power Save
Your UH15 Series has a unique circuit designed to dramatically
extend the life of the batteries. If there is no transmission nor an
incoming call within 5 seconds, your Radio switches to the
Power Save mode. The Radio is still able to receive transmis-
sions in this mode.
Low Battery Alert
If the battery level becomes low, the unit will go into a Battery
Low Mode. The Transmit Mode is disabled. Replace Alkaline
batteries immediately, or recharge NiMH rechargeable batteries
immediately to continue using the radio.
NOTE
Do not charge alkaline or non rechargeable batteries.
Plug the DC end of the DC/USB charge cable into the radio’s DC
charge port, and the USB end to a standard USB charge port, or
USB port of an AC adaptor (not included). Plug the AC adaptor into
the wall outlet.
• Before operating the radio, charge the rechargeable batteries
for 16 hours without interruption.
• Do not transmit when the radio is charging.
Charging Rechargeable Batteries
Belt Clip
To attach:
Slide the belt clip down into the catch until it snaps into place.
To remove:
Pinch and hold belt clip latch and slide the belt clip up.
Battery bars indicate the battery level . When the battery
meter shows 1 bar, the device goes into low battery mode and
indicates low battery in the form of an alert tone.
NOTE
- Remove the batteries from the radio for storage
purposes.
- Batteries may corrode over time and cause
permanent damage to your devices.
- Do not mix and use old/new/alkaline/NiMH batteries.
- Only charge NiMH rechargeable batteries.
- Charge rechargeable NiMH batteries once every
3 months when not in use.
Radio Battery Meter
3. Replace the battery cover and press down to secure.
2. Install 3 AA Alkaline batteries or 3 AA NiMH rechargeable
batteries as shown on the inside of the battery compartment.
1. With the back of the radio facing you, locate the latch to
release the battery cover and remove the cover.
Your radio requires 3 AA Alkaline batteries or 3 AA NiMH
Rechargeable batteries (not supplied).
Installing Batteries
Battery Level
Key Lock is on
Roger Beep is on
Scan is on
TX/RX Icon
VOX is on
CTCSS Code for
current Channel
Channel Number

GETTING STARTED

1
2
3
4
5
6
7
8
9
10
* Requires 3 AA rechargeable batteries to use this feature.
NiMH rechargeable batteries are recommended.
PTT (Push-to-Talk)
/Exit from MENU
1
3
UP
2
SCAN
Power On/Off
8
CALL Call tone
MON Monitor
10
Microphone
4
Speaker
5
Accessary Port
DC Charging Port*
6
Display Screen
7
MENU
Key Lock
9 DOWN
Display Icons: See page 2
Included in your Package
UH15 Series Radio
Operating Guide
Belt Clips
DC/USB charge cable*

CONTROLS & INDICATORS

For more exciting new products please visit our website:
Australia: www.uniden.com.au

UH15 Series

UHF CB Transceiver

Uniden UH15-3

Behöver du hjälp?

Antal frågor: 0

Behöver du hjälp eller har du en fråga om Uniden UH15-3? Ställ din fråga här. Lämna en tydlig och omfattande beskrivning av ditt problem och din fråga. Ju mer information du anger desto enklare blir det för andra ägare av Uniden UH15-3 att svara på din fråga.

Se manualen för Uniden UH15-3 helt gratis här nedan. Den här manualen tillhör kategorin och har betygsatts av 1 personer med ett genomsnitt på 7.5. Den här manualen är tillgänglig på följande språk: Engelsk. Behöver du hjälp eller har du en fråga om Uniden UH15-3? Ställ din fråga här

Uniden UH15-3 – specifikationer

Allmänt
Varumärke Uniden
Modell UH15-3
Produkt Radio
Språk Engelsk
Filtyp PDF

Vanliga frågor

Nedan hittar du de vanligaste frågorna om Uniden UH15-3 .

Är din fråga inte listad? Ställ din fråga här